Sith Acolyte mask from Star Wars RogueOne Simple 3D printing 3D print model
Sith helmet from Star Wars Rogue One 3D print model
High detailed model
3D Model helmet fully ready for Simple 3D printing FDM ,SLA and SLa printer.
The whole armor set can be found here
data ready to 3D printing:
1 part full*.obj (full detail)
8 part *.stl (for normal sized 3D printers)
You can scale the model according to your head measurements. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit.
We recommend joining the front and back part of the helmet by fabric rubber bands that are glued to the inside by using epoxy. That should allow you to stretch it when you put it on, and hold it when you wear it.
As the helmet is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the helmets shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.
This model was created by someone from our 3Demon team. It is fan-made. We are group of modelling and 3d printing enthusiasts, who work in a 3D makerspace located in Prague, Czech Republic. We make cosplay accessories, technical gadgets and much more. Have a look at our Facebook page or visit our website to find out more about us:
Do you like the model and don’t have a 3D printer? Our project 3Demon.cz is selling 3D printed kits of all our product with worldwide shipping. If you are interested in buying 3D printed kits just message me: