PAC-MAN cookie cutters
Cookie cutters of a gaming classic.
These models are cookie cutters to be 3D printed. The thickness of the wall is 1mm and the offset of the imprint is 3mm. So you can scale it a bit down or up if you have a smaller nozzle or print them with one perimeter and also choose to stop the print sooner if you want to make very thin cookies with the imprint.
Files contain cookie cutters as shown on the pictures.
At 100% scale the cookies are on average 65mm wide.
You can scale the models as you like, but have in mind that at 100% scale the walls are 1mm thin.
We recommend a layer height of 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. None of the parts need printing supports. Printing settings will vary greatly depending on your specific printer.