Hammer of Ragnaros – World of Warcraft 3D PRINT MODEL
Sulfuras is the mighty weapon of Ragnaros the Firelord. The weapon never leaves his grasp. It is composed of flaming red elementium and etched from end to end with intricate runes that seem to move like flowing lava across the weapons surface.
The hammer is quite big and is meant to be post-processed. There is a hole for a 8 mm steel rod to be place in the hammer so it holds better together.
Files contain pieces of the hammer ready to be 3D printed and complete hammer files that are not cut into smaller pieces.
At 100% scale the hammer’s dimensions are:
Width approx. 571 mm
Length approx. 800 mm
Height approx. 366 mm
We recommend a layer height of 0.2 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the model shell parts, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.
If you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com/preorder
This model was created by Jose @zbite_3dart from our 3Demon team. It is fan-made.
Have a look at our Facebook page or visit our website to find out more about us:
Do you like the model and don’t have a 3D printer? If you can’t find it for sale as a physical product just message me: