Sith Acolyte Star Wars mask printable 3D print model
Sith Acolyte mask from Star Wars RogueOne Simple 3D printing 3D print model
This is a photo of the back of the mask be post-processed.
Files contain pieces of the mask ready to be 3D printed and complete mask files, that are not cut into smaller pieces.
You can get the front piece here:
At 100% scale the helmets inside dimensions are:
Width approx. 178,72 mm
Length approx. 137,22 mm
Height approx. 222,12 mm
You can scale the model according to your head measurements. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit.
As the mask is quite big, it is meant to be post-processed. We recommend a layer height of 0.2 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the helmets shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.
If you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com/preorder