Shopping cart
Elden Ring

Elden Ring – Malenia’s Prosthetic Arm

In stock
  • Highly detailed 3D Model of Malenia’s prosthetic arm ready for simple 3D printing FDM ,SLS and SLA.
  • Data ready to 3D printing:
    • uncut .obj included
    • Uncut And Cut Stl. files for a 200 mm print bed, optional versions for high customization


Malenia, blade of Miquella


This is a digital 3D printable and wearable model of Melania’s prosthetic Arm from the critically acclaimed video game Elden Ring.

Melania’s war prosthesis symbolized her victories.

Some claim to have seen wings when the weapon was raised aloft;

wings of fierce determination that have never known defeat.”

The download contains all the parts of the arm including the blade – The model is mainly meant to be printed on an FDM printer. Files are both in STL (cut and uncut versions) and OBJ format.

Please note that the model is by default printed in a scale fit for a woman around 167 cm and will need to be scaled accordingly to your height and size, especially the fingers. The blade had been hollowed with a 3.4 mm diameter hole so you can insert a 3 mm carbon or a fiberglass rod to join the blade, due to the curvature of the blade you will need to insert two separate rods (57 and 32cm). You can choose to either print a version of the forearm that does not have a mechanism with cover connectors, and wield the blade in your hand, or you can print out the default version of the forearm and either attach (using magnets or glue) a normal cover or a cover with a mechanism that you can connect the blade to.

Check out our bundle for other parts of the Malenia armor set and get a discount! :

At 100% scale the model’s dimensions are approximately:

Width: 548/ 14 mm
Length: 576/ 108 mm
Height: 186/ 46 mm

You can scale the model as you wish. But at a much smaller size, we can’t guarantee that it will print and fit well. Our recommendation is to print just a piece of the thinnest part (tutorial here) and do a fitting test before printing all the parts. You may need to scale the model up as it is designed to be approximately the same size as an arm. 

We would use these settings for an FDM print:
Layer height 0.15 mm
Infill 15%
Supports 45°

This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.
Printing settings will vary greatly depending on your specific printer.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here.

Got something to discuss?


You may also like…

✨ Anime week! 50% off all 3D models from the anime category with code: animesale
+ +