This model is a fan-made replica of the wand from the Harry Potter movies.
The download contains pieces of the wand ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.
If you want to display some wands, you can download the Wand Stand we made.
If you want more wands, you can have a look at our wands collection.
At 100% scale wand should correspond with the dimensions from the movie series.
You can scale the model as you wish.
3D PRINTING SETTINGS
You should set your slicer to only retract when crossing perimeters, or you can switch off retractions completely if you’re printing only one part.
Otherwise, there is a high chance of clogging your nozzle.
We recommend using a 10 mm brim for better bed adhesion.
Layer height 0.2 mm
We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be glueing, sanding, painting, etc.
Printing settings will vary greatly depending on your specific printer.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.
Here are some links to our social media where you can join our community or just look at more of our creations:
Got something to discuss?