This is a digital 3D printable model of Thor’s hammer known as Mjolnir.
The download contains pieces of the models ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.
The download contains three versions of the model. First version which is clear without any cracks, second that has only structural cracks and third version, that is meant to be used with inside light source to achieve glowing cracks effect.
The third version of the hammer also has removable top lid, that can be attached with two magnets (10mm wide and 5 mm high).
At 100% scale the dimensions of the hammer are:
Length approx. 383 mm
Width approx. 217 mm
Height approx. 135 mm
Also you can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.
3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.2 mm
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.
We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.
Printing settings will vary greatly depending on your specific printer.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:
Got something to discuss?
is their anyway for you to 3d print and then i could buy it? im asking because i dont have a 3d printer
We don’t have the time capacity to process any physical orders and ship them, sorry. There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
So the cracked version if I add lighting to the inside it will glow through right> I am using an ender3v2, looking for some settings. Also the handle, is there any way to print the rings in different colors or does the handle need to be [rinted all at once
If you want the light to shine through a material, it has to be a see-through material. We used Iceland Blue Crystal Clear PLA by Fillamentum. The brand doesn’t matter though. And yes, the rings and the pommel are also separate files. 🙂
Thank you so much. I found the rings but can not find what stl I need to print and how many for the long parts. For example I want all my rings to be red, but the rest will be black along with the pommel bottom?
The separate rings and pommel were among the files so that people can put them on a wooden handle or PVC pipe.
But I added also the clear handle STL so that you can 3D print it all in different colours.