Mask of Darth Nihilus – 3D PRINT MODEL
The mask of Darth Nihilus was one of the pieces of armor that Sith Lord Darth Nihilus had bound to himself using the Force in an effort to retain a semblance of a physical form.
This model is a wearable mask. The mask is meant to be post-processed.
Files contain pieces of the mask ready to be 3D printed and complete mask files, that are not cut into smaller pieces.
At 100% scale the mask’s dimensions are:
Width approx. 154 mm
Thickness approx. 62 mm
Height approx. 187 mm
You can scale the model according to your head measurements.
As the mask is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the model shell parts, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.
If you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com/preorder
Do you like the model and don’t have a 3D printer? We also sell 3D printed kits of all our products with worldwide shipping. If you are interested in buying 3D printed kits just message me: