Description
Social Distancing Halloween Candy Delivery
Low Poly Haunter Halloween Candy Delivery Device for Social Distancing
This model was made to transport Halloween candy in the time of COVID-19. The hands work like a peg so we can hold onto other things than just the pumpkin bucket if you like. Just tighten a piece of string from your door to the sidewalk and you’re good to go 🙂
Put some obstacles on the ground along it so someone doesn’t accidentally trip over it in the dark. To get it back you can attach a fishing line to it and reel it in.
This model is inspired by the ghost Pokémon Haunter. We have done all 151 first generation Pokemon in the low poly style here: https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/pokemon/
This is the second Halloween decoration. Check out our Gengar candle here: https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/pokemon-gengar-halloween-low-poly-light-decoration/
SCALE
At 100% scale the all parts fit on a 200 mm 3D printer. There are four parts to this model: Haunter, pulley, pumpkin and handle. They fit into each other, no need for glue. The pumpkin is 1 mm thick but you can also print a 2 mm thick version if you want to scale the model down. Haunter is 140x158x111 mm.
PRINTER SETTINGS
This model prints without supports.
The on in the pictures was printed from Filamentum PLA Pearl Violet, Orange Orange, Crystal Clear and Traffic Black
We recommend a layer height of 0.15 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Printing settings will vary greatly depending on your specific printer.
If you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: https://3d-mon.com/preorder/
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.
Here are some links to our social media where you can join our community or just look at more of our creations:
Got something to discuss?
Are the wheels supposed to spin? I’ve printed them in both clear and black, at 0.14 and 0.12 layer height on my Flashforge Finder and they don’t spin. The plastic is smooth enough that it can travel along the string I bought, but I wanted to make sure.
Hello, yes the wheels are supposed to spin. It may be because of the direction in which you print the wheels.
You can let me know on my email michael@3d-mon.com
Regards