Description
Goblin Slayer’s helmet
Goblin Slayer is the series’ main character, an experienced silver ranked adventurer who only concerns himself with hunting goblins.
This model is a wearable helmet. The helmet is quite big and is meant to be post-processed.
Files contain pieces of the helmet ready to be 3D printed and complete helmet files, that are not cut into smaller pieces.
PRINTER SETTINGS
As the helmet is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the helmets shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.
Here are some links to our social media where you can join our community or just look at more of our creations:
Got something to discuss?
Wii the helmet come completed or in pieces ?
Both. In one piece and in parts.
The model is awesome! Is there any chance that the damaged version will split into pieces at some point in the future?
I’ve uploaded the split damaged version now
so does the helmet come in one piece>:D??sorry to ask just making sure(might get it:D)
Yes, it comes in one piece and in smaller ones
Is this a one size fits all helmet or how big is this?
Hi, I the opening is about 155 mm wide which should fit most heads. The upper part of the helmet is bigger than a human head, that’s just the way the helmet shape is designed so add some cushioning inside for a soft and comfortable fit. The best practise is to print a small slice of the helmet in the narrowest part a try if you head fits into it and then print the whole thing if that part fits. If not, you can always scale it up a bit.
Thank you!
how did you do the red eye with smoke?
It’s a red LED light with an e-cigarette connected to an air pump and a battery. We might do an instructables for it one day.