This lightsaber was wielded by the Human Jedi Master Qui-Gon Jinn. It was constructed after the Telosian Civil War.
This model is a replica of Qui-Gon Jinn’s lightsaber. It features a space for a flashlight.
- Follow the instructions in pictures to assemble the Flashlight, the flash-switch-housing, and the flash plug with the electrical wires
- Put an M 4×10 screw in the hole in the hilt (upper part) to tighten the blade, the top, and the hilt together
- Do not glue those parts together (so you can change the flashlight batteries)
- No paint is needed, you can print the parts in the correct colors! 🙂
At 100% scale, the lightsaber’s dimensions are:
Width approx. 42 mm
Length approx. 304 mm
We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the model’s shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.
This model was created by Adrien from our 3Demon team.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.
Here are some links to our social media where you can join our community or just look at more of our creations: