Description
This model is a fan-made replica of the wand from the Harry Potter universe.
Files contain the complete wand in one piece (.OBJ, .STL) and also the wand cut into smaller pieces (.STL) featuring a hex peg for easier gluing.
SCALE
At 100% the wand is approx. 306 mm / 12 inches long
But you can scale the model according to your needs
PRINTER SETTINGS
We recommend a layer height of 0.05 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. Use a 10 mm brim for better bed adhesion.
Printing settings will vary greatly depending on your specific printer.
If you want to display some wands, you can download the Wand Stand we made. For more wands, you can have a look at our wands collection.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.
Here are some links to our social media where you can join our community or just look at more of our creations:
Got something to discuss?