This is a digital 3D printable model of Link’s Ultrahand Rings from the Legends of Zelda: Tears of the Kingdom game.
Rings are adjusted to the human hand and can be comfortably worn without any movement restrictions.
The download contains pieces of the model ready to be 3D printed on a 200 mm print bed. All parts are placed on the print bed as we would print them to save you time.
The data contains both the default version of the rings and second upgraded runic version.
The whole Ultrahand 3D model (wearable prop for cosplay) can be found here!
Inner diameter of rings:
Thumb: 20 mm
Index finger: 20.5 mm
Middle finger: 20 mm
Ring finger: 19 mm
Pinky: 14.5 mm
At 100% scale the dimensions of each ring are approximately:
Width 20 mm
Length 20 mm
Height 30 mm
You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.
3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.2 mm
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.
We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.
Printing settings will vary greatly depending on your specific printer.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models.