Shopping cart
$0.00
Aquaman

King Nereus Trident – Aquaman

In stock
  • High detail model of King Nereus Trident from Aquaman.
  • 3D Model fully ready for Simple 3D printing on FDM, SLS, and SLA printers.
  • Data ready for 3D printing:
    • STL cut to fit 200mm printers
    • OBJ whole object

$19.00

3D printable model

Description

This is a digital 3D printable model of King Nereus Trident from Aquaman.

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.

  • To reinforce the trident, you can use a long carbon or wooden rod with a diameter of 30 mm.
  • Print The parts labeled with “LED“ using translucent filament and add LED lights inside the trident!

SIZE
At 100% scale the model’s dimensions are approximately:
Width 317 mm
Length 74 mm
Height 2230 mm
You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.

3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.15 mm
Infill 15%
Supports 45°
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.

Printing settings will vary greatly depending on your specific printer.

We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.

Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations:

Social Media Links

Got something to discuss?


Guest
Jason
1 month 25 days ago

Hello and good afternoon. Will this print a 1/1 scale replica? I am just interested in the head of the trident with part of the shaft below it, but at a 1/1 scale replica. And will it have texture to it or will it print out smooth like in the CG pic?

Support
1 month 22 days ago

Hello! Yes, it’s a 1:1 size replica and the surface is smooth as seen on the render images 🙂

 

You may also like…