Description
Horus is a Star Gate series and film character, the warrior in the service of the Lord Ra. These warriors were equipped with a Staff weapon – Ma’Tok.
This model is a wearable costume – armor (Hands, boots, waist, horn), which is quite big and is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.
Files contain pieces of the Horus armor ready to be 3D printed and complete Horus armor files (obj), that is not cut into smaller pieces. All files are full detailed
SCALE
Parts are scaled 1:1 to our figurine, which represents a 1,75m tall human.
We strongly advise scaling the models according to your body dimensions.
PRINTER SETTINGS
Printing settings will vary greatly depending on your specific printer.
We recommend a layer height of 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the Horus armor, because of its height. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.
Here are some links to our social media where you can join our community or just look at more of our creations:
Got something to discuss?