RC model Delage 15 S8

We present the Delage 15 S8 model in a 1/10 scale for RC remote control. The model was created for FDM printing.

 

You will need:

• bearing 15x10x4 – 8ks h
• Servo JX servo 6221MG – 1x (or similar, power 8kg)
• engine – 35 T (coil)
• regulator -180 A max , 11,V h
• Baterry LiPo 2cell 7,4V – dimensions: 70x30x20mm (space for battery)

A few words about the building …..

Read the whole manual before construction

I leave the material to the customer’s choice i use PLA for all.
Choose a material best for your printer and has beautiful layers.
I recommend a layer of 0.2 mm, just 20% fill. For bearings use and caradans use min 75% infill.

For tires 5%
But if your printers combine layers, take advantage of it. Alternatively, if you want a very detailed surface, print on a 0.1 mm layer.