Miketsu’s Bow (Miketsu) from Onmyoji.
This is a large Bow.
Files contain pieces of the Bow ready to be 3D printed and complete Bow files, that are not cut into smaller pieces.
At 100% scale the bow dimensions are:
Width approx. 80 mm (3.1 inches)
Length approx. 1375 mm (54.1 inches)
Height approx. 227 mm (8.9 inches)
You can scale the model as you like
As the bow is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the Bows parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.
Here are some links to our social media where you can join our community or just look at more of our creations: