This is a digital 3D printable model of Mera’s trident from the Aquaman Comic book.
This 3D model quite large and composed of parts. These cut standard 200mm printers. It also comes in a single part if you want to cut it up yourself or replace the pole with a pvc pipe.
At 100% scale the trident’s dimension are:
Width approx. (2142,91mm)
Length approx. (84,83mm)
Height approx. (273, 21mm)
You can scale the model as you like.
We use these settings for most of our prints:
Layer height 0.2 mm
We use a 10 mm brim for tall parts with a small base for better bed adhesion.
As the Aquaman weapon is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the weapons shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.
Here are some links to our social media where you can join our community or just look at more of our creations: