Description
This is a digital 3D printable model of the Baylan Skoll’s armor from Ahsoka Series.
- shoulder armor
- forearm armor
- hand covers
- belt buckle
- back buckle
- ring
The download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time. The parts are connected via pins that can also be printed. This 3D model is meant to be used as a wearable cosplay armor.
SIZE
At 100% scale, the shoulder’s dimensions are approximately:
Width 140 mm
Length 170 mm
Height 200 mm
At 100% scale, the arm cover’s dimensions are approximately:
Width 120 mm
Length 220 mm
Height 120 mm
You can scale the model according to your measurements.
3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.15 mm
Infill 15%
Supports 45°
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.
We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.
Printing settings will vary greatly depending on your specific printer.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links
Got something to discuss?
The uncut files do not have the lower part of the shoulder armor included. It isnt attached to the upper part of the shoulder armor, nor is it available as a file in the uncut zip file. Please advise. Thank you.
That’s because there aren’t 2 version of this piece. This piece fits the 200printers as it is, and is placed among the rest of the cut files. See “Baylan_skoll_right_shoulder_part3.stl”
The button placement on the gauntlets can be updated with the highly close up screen caps out there now.
Yes! Absolutely! Working on it!
How would you suggest I wear these shoulder armor pieces?
The lower shoulder piece is designed to be tied to the upper one. I’d suggest using a large piece of velcro sewn onto your robe and glued onto the shoulder to attach the whole shoulder armor! 🙂