Description
Seventh Sister Helmet
This model is a wearable helmet from Star Wars. The armor is quite big and is meant to be post-processed.
Files contain pieces of the helmet ready to be 3D printed and complete helmet files, that are not cut into smaller pieces.
This model is a part of the Seventh Sister Bundle
SCALE
At 100% scale the helmet is:
Width approx. 323 mm
Depth approx. 420 mm
Height approx. 317 mm
You can scale the model according to your head measurements.
PRINTER SETTINGS
As the helmet is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the models shell parts, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.
Here are some links to our social media where you can join our community or just look at more of our creations:
Got something to discuss?
What is the best way to connect the mask to the rest of the helmet?
Hi! I would use small strong magnets to keep it functional!