Low poly Feraligatr in a dynamic crouched pose, one arm thrown back and the other reaching forward, mouth open. Sharp faceted blue body with three sets of jagged red spikes on the head, back, and tail. The red spikes print separately so you get the two-tone look without painting.
Printing Your Low Poly Feraligatr
- Supports: Colors body part needs supports. Colors back spikes, colors head spikes and colors tail spikes parts are support-free.
- Color parts: Multi-color: separate STL per color part, print each individually and assemble.
- Scale: 4% of life-size. Scale up freely. The geometry holds well at larger sizes.
- Recommended layer height: 0.15 mm
What You Get: STL & 3MF Files
- STL files:
- Colors back spikes (no supports)
- Colors body (needs supports)
- Colors head spikes (no supports)
- Colors tail spikes (no supports)
- Whole model in one piece (needs supports, for single-color printing)
- 3MF file with custom support settings and recommended print parameters
- Files labeled no_supp where supports are not required
3D Printable Gen 2 Pokémon Bundles
This model is part of our low-poly Gen 2 Pokémon collection. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.
| Quantity from the collection | Discount |
|---|---|
| 6-14 models | 30% off |
| 15-99 models | 50% off |
| 100+ models | 75% off |
These are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don’t have a 3D printer, a local maker or print service can bring these to life for you.
