{"title":"Staffs and spears","description":"","products":[{"product_id":"jaylah-extendlabe-staff-star-trek-beyond-print","title":"Jaylah Extendable Staff - Star Trek","description":"\u003cp\u003eJaylah - Staff - Star Trek Beyond\u003c\/p\u003e\n\u003cp\u003eIn time, Jaylah became a formidable warrior, skilled in martial arts and in wielding a quarterstaff that doubled as a rifle. (Star Trek Beyond)\u003c\/p\u003e\n\u003cp\u003eThis model is an extendable staff of Jaylah. The large pole does not have to be 3D printed and a standard 3\/4 inch pipe can be used (26.67 mm). There is a mechanism which allows the parts to lock in place in the shortest and longest position. Depending on the quality of the print it made need a bit of tweaking on order to work properly. Inside the control panel is enough space for electronics. The buttons are also separate so they can be made into working buttons.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the staff ready to be 3D printed and a file where the parts are aligned so that you know where to place them after you print them.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale when the staff is extended it is 1326 mm long, when retracted it is 945 mm. None of the parts exceed 200 mm (except for the pole which can be switched out for a 3\/4 inch (26.67 mm) pipe.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eThe staff is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the thinner parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703811785084,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/render_jaylah_background_4fc7f86b-51b1-4e6a-a88b-50cb4c273282.png?v=1756927139"},{"product_id":"priestess-staff-goblin-slayer","title":"Priestess staff - Goblin Slayer","description":"\u003cp\u003eThis is a \u003cstrong\u003edigital 3D printable model\u003c\/strong\u003e of the Priestess' staff from Goblin Slayer.\u003c\/p\u003e\u003ch2\u003e📦 Included Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  STL (cut for 200mm printer beds) \u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Assembled OBJ file (for easy scaling)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  All cut parts are placed on the print bed just as we would print them, saving you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  Width: 180 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Length: 45 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Height: 1600 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  Feel free to scale the model to fit your needs. Learn more about sizing and scaling for cosplay \u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  Layer height: 0.15 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Infill: 10% gyroid pattern\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Supports: 30° organic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  For taller parts, use a brim for better bed adhesion\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  Settings may vary depending on your printer, so treat these as a starting point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out the \u003c\/strong\u003e\u003ca href=\"https:\/\/3d-mon.com\/products\/goblin-slayer-whole-costumes?_pos=2\u0026amp;_sid=399d4d2e3\u0026amp;_ss=r\" class=\"editor-link\" rel=\"ugc\" target=\"_blank\"\u003e\u003cstrong\u003eGoblin Slayer Bundle\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e🛠️ Assembly Instructions\u003c\/h2\u003e\u003cp\u003eGlue the parts together. Hex-pegs for easy alignment are included. For stronger joints, melt the seams with a soldering tool.\u003c\/p\u003e\n\u003cp\u003e  No 3D printer? No problem! Search for your local 3D printing services.\u003cbr\u003e\u003cbr\u003eThis fan-made model was brought to life by \u003cstrong\u003e3Demon\u003c\/strong\u003e, a team of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been creating 3D printable models for over a decade, from cosplay accessories to all sorts of interesting designs.\u003c\/p\u003e\n\u003cp\u003e  ✨ Check out more of our creations or join our community \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703816241532,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Priestess_staff_color_2_3Demon_f7229284-b644-4c9c-bac0-a51abe6aa113.jpg?v=1768913190"},{"product_id":"the-jaina-proudmoore-staff-dragon-age-3d-print-model","title":"Jaina Proudmoore staff - World of Warcraft","description":"\u003cp\u003e\u003cstrong\u003eJaina proudmoore staff\u003c\/strong\u003e from \u003cstrong\u003eWorld of Warcraft\u003c\/strong\u003e. It is known for its size, blue crystal at the top, and general look.\u003cbr\u003e\nThis model is handy for staff. The staff is quite big and is meant to be post-processed.\u003cbr\u003e\nFiles contain pieces of the staff ready to be 3D printed and complete staff files, that are not cut into smaller pieces.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale, the staff’s dimensions are:\u003cbr\u003e\nWidth approx.191 mm\u003cbr\u003e\nLength approx.1727 mm\u003cbr\u003e\nHeight approx. 191 mm\u003c\/p\u003e\n\u003cp\u003eYou can scale the model according to your needs. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eAs the staff is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the helmet's shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703818961276,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Jaina_proudmoore_staff_color_4_3Demon_bf6e811f-5fe2-4f49-92ee-e7e5d25571f1.jpg?v=1756927734"},{"product_id":"staff-of-the-dragon-dragon-age","title":"Staff of the Dragon – Dragon Age","description":"\u003cp\u003eThis is a digital 3D printable model of \u003cstrong\u003eStaff of the Dragon from a videogame Dragon Age.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the model’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 18 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 9 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 185 mm\u003c\/p\u003e\n\u003cp\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe use these settings for most of our prints:\u003cbr\u003e\nLayer height 0.2 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45°\u003cbr\u003e\nFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories, but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703820632444,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Staff-of-Dragon-0_80f7865b-a972-4c9d-bd41-4247964e51e1.jpg?v=1756927738"},{"product_id":"masters-of-the-universe-havoc","title":"Masters of the Universe - Havoc Staff","description":"\u003cp\u003e\u003cstrong\u003eMasters of the Universe - Havoc Staff\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis 3D printable model is a staff from film Masters of the Universe. The Havoc staff was wielded by Skeletor and used in battle against He-Man's \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003ePower Sword\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eFiles contain pieces of the model (STL) ready to be 3D printed on 210 x 210 x 230 mm 3D printers and 3D model files that are not cut into smaller pieces (OBJ).\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eIn case of STL pieces, model is positioned in assembly with attached pins.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003ePrinted model is meant to be post-processed after printing. Recommended post-processing methods are sanding - glueing - applying putty - sanding - painting. Check out our Youtube channel to see assembly and whole post-process in action!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eAt 100% scale the staff is made for an average size\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eWidth: 350 mm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eLength: 1 900 mm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHeight: 250 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eYou can scale the model according to your needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eAs the \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003estaff \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eis quite big, it is meant to be post-processed. We recommend a layer height \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eof 0.1\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e to \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e0.3\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eFor reliable printing, we also recommend setting a brim to the staff handle parts, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e. Printing settings will vary greatly depending on your specific printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eIf you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com\/preorder\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703866278268,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/6_db496e58-0f99-4af6-8202-0956c170ee17.png?v=1756929212"},{"product_id":"kiriya-staff-princess-connect-3d-print-model","title":"Kiriya staff - Princess Connect","description":"\u003cp\u003e\u003cstrong\u003eKIRIYA STAFF-Princess Connect 3D PRINT MODEL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStaff of Kiriya Momochi, cat-loving character in TV series Princess Connect Re:Dive. You can learn more about this character here \u003ca href=\"https:\/\/princess-connect.fandom.com\/wiki\/Kiruya_Momochi\"\u003eHere.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis model is a staff. Because the model is quite big it's meant to be post-processed.\u003cbr\u003e\nFiles contain pieces of the staff ready to be 3D printed on a 200 mm printer and complete staff files, that are not cut into smaller pieces.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the staff’s outside dimensions are:\u003c\/p\u003e\n\u003cp\u003eWidth approx. 275 mm\u003cbr\u003e\nLength approx. 1160 mm\u003cbr\u003e\nHeight approx. 80 mm\u003c\/p\u003e\n\u003cp\u003eYou can scale the model according to your needs.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eAs the staff is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the small parts of staff, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer. \u003c\/p\u003e\n\u003cp\u003eThis model was created by someone from our 3 Demon team. We are group of modelling and 3D printing enthusiasts, who work in a 3D makerspace located in Prague, Czech Republic. We make cosplay accessories, technical gadgets and much more.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com\/preorder\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703888331132,"sku":null,"price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/M-1011-KiRUYA-STAFF-main_render_2.80_b4d86be9-29a6-4af7-a810-df04c4af90d9.png?v=1756929946"},{"product_id":"matok-staff","title":"Ma'Tok Jaffa Staff","description":"\u003cp\u003eThe Ma'Tok staff is a weapon Jaffa warriors use in the Star Gate series and movies. It is used as a ranged energy weapon (Firing from the oval side, which can be opened) or as a melee weapon (club)\u003c\/p\u003e\n\u003cp\u003eThis model is a staff. Instead of printing the long cylindrical parts of the staff, we recommend using a \u003cstrong\u003e140 cm aluminum tube 30 mm in outer diameter\u003c\/strong\u003e (2 mm wall thickness)\u003c\/p\u003e\n\u003cp\u003eThere are two versions of the Ma'Tok Jaffa staff\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStatic staff - closed staff\u003c\/li\u003e\n\u003cli\u003eOpenable staff - files contain mechanical parts that can be assembled into a \u003cstrong\u003efunctional openable staff\u003c\/strong\u003e using electronics. \u003cstrong\u003e140 cm aluminum tube 30 mm in outer diameter (2 mm wall thickness) is required.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFiles contain pieces of the staff ready to be 3D printed and complete staff files (obj), that is not cut into smaller pieces. All files are full detailed\u003c\/p\u003e\n\u003ch2\u003eDisclaimer:\u003c\/h2\u003e\u003cp\u003eThis product includes \u003cstrong\u003eSTL files\u003c\/strong\u003e, \u003cstrong\u003eArduino files\u003c\/strong\u003e, \u003cstrong\u003eresources\u003c\/strong\u003e, \u003cstrong\u003ewiring diagram\u003c\/strong\u003e, \u003cstrong\u003esounds\u003c\/strong\u003e, and a \u003cstrong\u003eBill of Materials\u003c\/strong\u003e for a custom PCB design. \u003cstrong\u003eIt does not include a step-by-step guide.\u003c\/strong\u003e A fair amount of experience with \u003cstrong\u003eArduino\u003c\/strong\u003e, \u003cstrong\u003eprogramming\u003c\/strong\u003e, and \u003cstrong\u003eelectronics\u003c\/strong\u003e is required to use this resource effectively.\u003c\/p\u003e\n\u003cp\u003eThe electronics are designed using \u003cstrong\u003eKi CAD 5\u003c\/strong\u003e and feature a \u003cstrong\u003esingle-sided PCB\u003c\/strong\u003e with two wire jumpers. The PCB has dimensions of \u003cstrong\u003e102 x 40 mm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eYou will need to source additional external components:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWS 2812 b LED strip\u003c\/strong\u003e (400 mm) split into four 100 mm strips (10 LEDs each)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker\u003c\/strong\u003e suitable for DFPlayer, 8 ohm, 3 W or less\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMomentary switch\u003c\/strong\u003e, normally open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServo motor\u003c\/strong\u003e, MG 996 or compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Li Po batteries\u003c\/strong\u003e connected in series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The PCB is \u003cstrong\u003enot designed to charge batteries internally\u003c\/strong\u003e—an external charger is required.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale the Staff dimensions are:\u003cbr\u003e\nWidth approx. 165 mm\u003cbr\u003e\nLength approx. 1970 mm\u003cbr\u003e\nHeight approx. 135 mm\u003cbr\u003e\nYou can scale the model as you wish\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/Qnb_NJSDoRk?feature=shared\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv class=\"cxmmr 5 t 8 oygrvhab hcukyx 3 x c 1 et 5 uql o 9 v 6 fnle ii 04 i 59 q\"\u003e\n\u003cdiv dir=\"auto\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe recommend a layer height of 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the Zat'nik'tel, because of its height. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704544477564,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/SG_Staff_Barvy-Studio-3.276_75d77245-477c-4a04-b9e5-ebc812097674.png?v=1756968213"},{"product_id":"stargirl-staff","title":"Stargirl - Staff","description":"\u003cp\u003eThis is a \u003cstrong\u003edigital 3D printable model\u003c\/strong\u003e of Stargirl’s Staff from serial Stargirl..\u003c\/p\u003e\u003ch2\u003e📦 Included Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  STL (cut for 200mm printer beds)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  STL (uncut for larger printers)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Assembled OBJ file (for easy scaling)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  All cut parts are placed on the print bed just as we would print them, saving you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  Width: 63 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Length: 141 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Height: 1704 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  Feel free to scale the model to fit your needs. Learn more about sizing and scaling for cosplay \u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  Layer height: 0.15 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Infill: 10% gyroid pattern\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Supports: 30° organic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  For taller parts, use a brim for better bed adhesion\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  Settings may vary depending on your printer, so treat these as a starting point.\u003c\/p\u003e\n\u003ch2\u003e🛠️ Assembly Instructions\u003c\/h2\u003e\u003cp\u003eGlue the printed parts together. Insert a wooden or steel rod (12,5 mm \/ 0.5 in thick, up to 1200 mm \/ 47 in long) for added strength and durability.\u003c\/p\u003e\n\u003cp\u003e  No 3D printer? No problem! Search for your local 3D printing services.\u003cbr\u003e\u003cbr\u003eThis fan-made model was brought to life by 3Demon, a team of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been creating 3D printable models for over a decade, from cosplay accessories to all sorts of interesting designs.\u003c\/p\u003e\n\u003cp\u003e  Check out more of our creations or join our community \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704549523836,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Stargirl_staff_color_4_3Demon.jpg?v=1763461321"},{"product_id":"kena-staff","title":"Kena - Staff","description":"","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704550146428,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Kena_staff_color_1_3Demon-1_94d5dcec-df02-4aef-8c81-36d720a7667e.jpg?v=1756968779"},{"product_id":"utaru-harvest-spear-horizon","title":"Champion's Spear — Horizon Forbidden West","description":"\u003cp\u003eThis is a digital 3D printable model of \u003cstrong\u003eAloy's Spear from the videogame Horizon Forbidden West.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe download contains pieces of the model ready to be 3D printed on a 200 mm print bed. All cut parts are placed on the print bed as we would print them to save you time.\u003c\/p\u003e\n\u003cp\u003eYou should add feathers and string to the model to finish the look. The long thin parts that go along the middle should have the end piece glued after you put it in place, otherwise, you would be able to get it through the ring that goes around the spear.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the model’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 173 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 1500 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 105 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe use these settings for most of our prints:\u003cbr\u003e\nLayer height 0.2 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45°\u003cbr\u003e\nFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: \u003cstrong\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePhoto of the printed prop by \u003ca href=\"https:\/\/www.facebook.com\/TiffanyDeanCosplay\/\"\u003eTiffany Dean Cosplay\u003c\/a\u003e! \u003ca href=\"https:\/\/3d-mon.com\/aloys-spear-cosplay-guide-horizon-forbidden-west\/\"\u003eRead about the making of the spear here! \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704571740540,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Horizon-Spear-Feathers_d40e0706-d395-4cbb-9146-50cbca51d777.jpg?v=1756969406"},{"product_id":"vibranium-spear-black-panther","title":"Vibranium Spear - Black Panther Wakanda Forever","description":"\u003cp class=\"western\"\u003e\u003cb\u003eVibranium Spear (Black Panther) featuring also a new Wakanda Forever design!\u003cbr\u003e\n\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThese are digital 3D printable model of Vibranium Spear from Marvel \u003cspan lang=\"en-US\"\u003e’s Black Panther\u003c\/span\u003e .\u003c\/p\u003e\n\u003cp\u003eThe spear is separated into pieces that fit onto a 200 mm print bed with holes inside prepared for insertion of a 10 mm carbon rod. Files for a custom spear with your own handle (3 cm diameter) are also included.\u003c\/p\u003e\n\u003cp\u003eWakandan Spears were the traditional weapons of the Dora Milaje. As such, the Dora Milaje general Okoye was rarely seen without her Vibranium Spear.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% the dimensions are approximately:\u003cbr\u003e\n\u003cb\u003eWidth\u003c\/b\u003e 67 mm\u003cbr\u003e\n\u003cb\u003eLength\u003c\/b\u003e 1510 mm\u003cbr\u003e\n\u003cb\u003eHeight\u003c\/b\u003e 41 mm\u003cbr\u003e\nYou can scale the model as you wish, but we can’t guarantee that the model will print well at a much smaller size.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe use these settings for most of our prints:\u003cbr\u003e\nLayer height 0.2 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45°\u003cbr\u003e\nWe use a 10 mm brim for tall parts with a small base for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\n\u003cspan lang=\"cs-CZ\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https:\/\/3d-mon.com\/links\/\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704613159292,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/01_03b5ffbd-2e14-4492-8e8f-cda9457069bb.jpg?v=1756970014"},{"product_id":"dora-milaje-cosplay-set-black-panther","title":"Dora Milaje cosplay set - Black Panther","description":"\u003cp\u003eThis set contains digital 3D models of Dora Milaje armor, spear, belt buckle, and accessories from Marvel\u003cspan lang=\"en-US\"\u003e’s Black Panther\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eYou can read more about each of the parts by clicking through to their individual product pages.\u003c\/p\u003e\n\u003cp\u003eThe more parts you buy the bigger the discount.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDo you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis \u003c\/span\u003e\u003cspan\u003efan-made\u003c\/span\u003e\u003cspan\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704613323132,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/DoraMilaje_3Demon.463_2e4c4015-dbf9-4c41-aa68-aa08a8dee6cd.jpg?v=1756970020"},{"product_id":"prey-feral-predator-spear","title":"Prey - Feral Predator Spear","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a digital 3D printable model of \u003c\/span\u003e\u003cstrong\u003eFeral Predator’s long and short version of the spear from the Prey movie.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe download contains \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003epieces of the model ready to be 3D printed on a 200 mm print bed and \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efiles that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe long spear files contain a verson which slides onto a 1 m long carbon or wooden rod (1 cm diameter).\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eSIZE\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale the \u003c\/span\u003e\u003cstrong\u003eshort spear’s \u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003edimensions are approximately:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eWidth\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e80 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eLength\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e565 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eHeight\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e86 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale the \u003c\/span\u003e\u003cstrong\u003elong spear’s \u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003edimensions are approximately:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eWidth\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e105 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eLength\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e1600 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eHeight\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e118 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.2 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https:\/\/3d-mon.com\/links\/\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704615977340,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Prey_Spear.0_f27d7612-2006-40a9-9717-0d8edd6e21cc.jpg?v=1756970054"},{"product_id":"namor-armor-and-spear-wakanda-forever","title":"Namor Armor and Spear - Wakanda Forever","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a digital 3D printable model of \u003c\/span\u003e\u003cstrong\u003eNamor’s armor, accessories, and spear from the movie Black Panther: Wakanda Forever.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e📦 Included Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBelt, necklaces\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e (Assemble using hex pegs, which are included in the download. The stones are separated so that you can replace them with real ones.)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEarrings, nose piercing \u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e(featuring magnet slots - 5 mm diameter, 2 mm height)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eArm bracelet, shin armor, forearm armor, wings\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpear \u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e(Use 10 mm carbon rod for reinforcement and connection. The three ornaments (A, B, C) are designed to be slid into the joints on the main bar - see the OBJ model)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll pieces of the models are ready to be 3D printed on a 200 mm print bed. It includes also OBJ files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale, the \u003c\/span\u003e\u003cb\u003eArmor dimensions\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e are scaled to a 170 cm tall person (about 5 ½ feet).\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou should scale the model according to your body measurements.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale the \u003c\/span\u003e\u003cstrong\u003espear’s \u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003edimensions\u003c\/strong\u003e are approximately:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eWidth\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e93 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eLength\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e68 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eHeight\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e1673 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model as you wish, but we can’t guarantee that the model will print well at a much smaller size.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.2 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https:\/\/3d-mon.com\/links\/\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704622334332,"sku":null,"price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/ff.11_6645b465-57db-4674-b56e-1916d679e59c.jpg?v=1756970164"},{"product_id":"fearne-calloway-staff-critical-role","title":"Fearne Calloway staff - Critical Role","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a digital 3D printable model of\u003c\/span\u003e\u003cb\u003e Fearne Calloway’s staff \u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e- Staff of the adder from the \u003c\/span\u003e\u003cb\u003eCritical Role\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e play series.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe created the 3D model based on the officilal illustraion of Fearne Calloway in Campaign 3, by Hannah Friederichs. The prop features hex-shaped slots that will help you with the assembly using our hex-pins. The lantern is hollow and therefore allows inserting an LED light.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe download contains \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003epieces of the model ready to be 3D printed on a 200 mm print bed (STL) and \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efiles that are not cut into smaller pieces (OBJ). All cut parts are oriented and placed on the print bed as we would print them to save you time.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eSIZE\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale the \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emodel’s \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003edimensions are approximately:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eWidth\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e268 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eLength\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e140 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eHeight\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e1905 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.2 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis STL was used by @ruby_silverado for her Fearne cosplay, printed by @remarkableprops.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eCheck our \u003ca href=\"https:\/\/www.instagram.com\/remarkableprops\/\"\u003eInstructables\u003c\/a\u003e to learn more about the project!\u003cbr\u003e\n\u003ca href=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2023\/04\/fearne-calloway-critical-role-cosplay-staff-3dprint-tutorial2-1.jpg\"\u003e\u003cimg class=\"alignnone size-medium wp-image-132513\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2023\/04\/fearne-calloway-critical-role-cosplay-staff-3dprint-tutorial2-1-300x231.jpg\" alt=\"\" width=\"300\" height=\"231\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https:\/\/3d-mon.com\/links\/\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704643502460,"sku":null,"price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Fearne_Staff.5_9da0ad82-537d-41a7-a748-845ca3fc6022.jpg?v=1756970391"},{"product_id":"b2-staff_nier_automata","title":"2B Mahou Shoujo Staff - Nier Automata","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a \u003cstrong\u003edigital 3D printable\u003c\/strong\u003e model of \u003cstrong\u003e2B Mahou Shojou Staff\u003c\/strong\u003e from \u003cstrong\u003eNier Automata \u003c\/strong\u003efanart.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can use a 150 x 2.5 cm rod instead of printing all the rod parts.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e 270 mm\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e 159 mm\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e 1600 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size, the model will print well.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/WSMLRUqFfGI\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.2 mm\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis fan-made model was brought to life by \u003cstrong\u003e3Demon.\u003c\/strong\u003e We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere.\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704662442364,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/nier-automata-2b-mahous-shoujo-magic-girl-staff-cosplay-prop-3d-print_69f2aaca-ee16-41ea-8d44-fbf92f6df463.jpg?v=1756970488"},{"product_id":"fearne-calloway-staff-critical-role-copy","title":"Amity's Cat Ghost Palisman Staff - The Owl House","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a digital 3D printable model of \u003cstrong\u003eAmity's Cat Ghost Palisman Staff from the animated series The Owl House\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe download contains \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003epieces of the model ready to be 3D printed on a 200 mm print bed (STL) and \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efiles that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe files contain 2 versions of the staff. 70 cm and 113 cm long and are split among smaller printable parts that can be connected by hexagonal pegs.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e🛠️ Assembly Instructions\u003c\/h2\u003e\u003cp\u003eThe files are color-divided and don't require painting. This means that the tail is separate, but due to its shape, it's a little bit tricky to put it on the staff. Use a bit of force to place on the staff.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf you print in PLA, you can heat the tail in warm water and it will be easier to bend it around the staff. :)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eSIZE\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale, the \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eCat’s\u003c\/strong\u003e \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003edimensions are approximately:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eWidth\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e66 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eLength\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e60 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eHeight\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e339 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size, the model will print well. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe create our 3D models on our average-sized body template. \u003c\/span\u003e\u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRead about the sizing and how to scale the models to fit your body here.\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use hex pegs (included in the files) that will help you connect the cut pieces of the model. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. You can try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or look at more of our creations \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704734073212,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/cat-ghost-owl-house-amity-cosplay-3demon-stl-files-cover_64ec22a6-a256-4d8c-8905-f15b83f0e24a.jpg?v=1756970712"},{"product_id":"hunters-flapjack-palisman-staff-the-owl-house","title":"Hunter's Flapjack Palisman Staff - The Owl House","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis is a digital 3D printable model of \u003cstrong\u003eHunter's Flapjack Palisman Staff from the animated series The Owl House\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThe download contains \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003epieces of the model ready to be 3D printed on a 200 mm print bed (STL) and \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efiles that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThe files contain 2 versions of the staff. 70 cm and 113 cm long and are split among smaller printable parts which can be connected by hexagonal pegs.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eSIZE\u003c\/b\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eAt 100% scale the \u003cstrong\u003eFlapjack’s\u003c\/strong\u003e dimensions are approximately:\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eWidth\u003c\/b\u003e \u003cspan style=\"font-weight: 400\"\u003e98 \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eLength\u003c\/b\u003e \u003cspan style=\"font-weight: 400\"\u003e167 \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eHeight\u003c\/b\u003e \u003cspan style=\"font-weight: 400\"\u003e214 \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well. \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe create our 3D models on our average-sized body template. \u003c\/span\u003e\u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eRead about the sizing and how to scale the models to fit your body here.\u003c\/span\u003e\u003c\/a\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eSupports 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe use hex-pegs (included in the files) that will help you connect the cut pieces of the model. \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003cstrong\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704736825724,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/FLapjack.69_028dadcc-25c6-47b5-9847-ff942e91ad4a.jpg?v=1756970716"},{"product_id":"guss-chameleon-palisman-staff-the-owl-house","title":"Gus's Chameleon Palisman Staff - The Owl House","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis is a digital 3D printable model of \u003cstrong\u003eGus's Chameleon Palisman Staff from the animated series The Owl House\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThe download contains \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003epieces of the model ready to be 3D printed on a 200 mm print bed (STL) and \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efiles that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\nThe files contain 2 versions of the staff. 70 cm and 113 cm long and are split among smaller printable parts which can be connected by hexagonal pegs.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eSIZE\u003c\/b\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eAt 100% scale the \u003cstrong\u003eChameleon's\u003c\/strong\u003e dimensions are approximately:\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eWidth\u003c\/b\u003e \u003cspan style=\"font-weight: 400\"\u003e58 \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eLength\u003c\/b\u003e \u003cspan style=\"font-weight: 400\"\u003e176 \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eHeight\u003c\/b\u003e \u003cspan style=\"font-weight: 400\"\u003e144 \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well. \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe create our 3D models on our average-sized body template. \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003eRead about the sizing and how to scale the models to fit your body here.\u003c\/a\u003e\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eSupports 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe use hex-pegs (included in the files) that will help you connect the cut pieces of the model. \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003cstrong\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704736858492,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Chameleon.36_c357829c-ecf3-47ea-9d7d-04ab89e03922.jpg?v=1756970721"},{"product_id":"liliths-raven-palisman-staff-the-owl-house","title":"Lilith's Raven Palisman Staff - The Owl House","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a digital 3D printable model of \u003cstrong\u003eLilith's Raven Palisman Staff from the animated series The Owl House\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe download contains \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003epieces of the model ready to be 3D printed on a 200 mm print bed (STL) and \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efiles that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe files contain 2 versions of the staff. 70 cm and 113 cm long and are split among smaller printable parts which can be connected by hexagonal pegs.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale the \u003cstrong\u003eRaven’s\u003c\/strong\u003e dimensions are approximately:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eWidth\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e83 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eLength\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e104 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eHeight\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e216 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model as you wish, but we can’t guarantee that the model will print well at a much smaller size. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe create our 3D models on our average-sized body template. \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003eRead about the sizing and how to scale the models to fit your body here.\u003c\/a\u003e\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use a 10 mm brim for tall parts with a small base for better bed adhesion.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use hex pegs (included in the files) that will help you connect the cut pieces of the model. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003cstrong\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704739578236,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Raven.58_7bb5af9f-b562-48b0-b761-b6284bb39e69.jpg?v=1756970726"},{"product_id":"edas-owlbert-palisman-staff-the-owl-house","title":"Eda's Owlbert Palisman Staff - The Owl House","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a digital 3D printable model of \u003cstrong\u003eEda's Owlbert Palisman Staff from the animated series The Owl House\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe download contains \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003epieces of the model ready to be 3D printed on a 200 mm print bed (STL) and \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efiles that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time. The Owl staff is hollow and allows printing the eyes separately (I printed the with yellow-seethrough filament). You can add LED lights inside. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/the-owl-house-palismen-collection\/\"\u003eCheck out the whole Palismen collection!\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/the-owl-house-palismen-collection\/\"\u003e\u003cimg class=\"alignnone wp-image-129324 size-large\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2023\/06\/palismen-collection-owl-house-stl-3d-print-1024x410.jpg\" alt=\"\" width=\"1024\" height=\"410\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe files contain 2 versions of the staff. 70 cm and 113 cm long and are split among smaller printable parts which can be connected by hexagonal pegs.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale the \u003cstrong\u003eOwl’s\u003c\/strong\u003e dimensions are approximately:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eWidth\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e124 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eLength\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e109 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eHeight\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e207 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe create our 3D models on our average-sized body template. \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003eRead about the sizing and how to scale the models to fit your body here.\u003c\/a\u003e\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use a 10 mm brim for tall parts with a small base for better bed adhesion.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use hex-pegs (included in the files) that will help you connect the cut pieces of the model. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cstrong\u003ehere.\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704740921724,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/IMG_3780-Edit-1_e71f7032-5636-4a4e-819d-e845cd57809e.jpg?v=1756970736"},{"product_id":"the-owl-house-palismen-collection","title":"The Owl House Palismen Collection","description":"\u003cp\u003eThis set contains\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003edigital 3D models\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof the animal palismen from\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eThe Owl House series\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eYou can read more about each of the parts by clicking each palisman staff.\u003c\/p\u003e\n\u003cp\u003eThe more parts you buy the bigger the discount.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDo you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis \u003c\/span\u003e\u003cspan\u003efan-made\u003c\/span\u003e\u003cspan\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704744165756,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/owl-house-palisman-collection-cover-stl-3dprint-3demon-e1687709680779_fbb34f52-5e9f-49ac-af90-e98df0d11f59.jpg?v=1756970740"},{"product_id":"ahsoka-tanos-white-robe-staff","title":"Ahsoka Tano's White Robe Staff","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a digital 3D printable model of \u003cstrong\u003eAhsoka Tano's Staff from Star Wars. \u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/female3dprintmodel\/ahsoka-tanos-white-robe-armor\/\"\u003eCheck our White Robe armor from the Ahsoka series!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe download contains \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003epieces of the model ready to be 3D printed on a 200 mm print bed (STL) and \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efiles that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e🛠️ Assembly Instructions\u003c\/h2\u003e\u003cp\u003eThe Staff can be assembled using 4 parts (printed multiple times), 2 handle parts, ring \u003cspan style=\"font-weight: 400;\"\u003e (there are 2 options - thinner and thicker ring), and a 25 mm diameter wooden pole or PVC pipe.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eSIZE\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale, the \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003estaff in the OBJ file is\u003cstrong\u003e 190 cm tall. \u003c\/strong\u003eIf you want the staff shorter, print fewer parts. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe create our 3D models on our average-sized body template. \u003c\/span\u003e\u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRead about the sizing and how to scale the models to fit your body here.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003c\/a\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: \u003cstrong\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704823136636,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Ahsoka-Tano-White-Robe-staff-free-stl-3demon_cover_4b4719c9-adf7-4424-98fe-41f0104ce509.jpg?v=1756971025"},{"product_id":"belles-staff-beauty-and-the-beast-mirrorverse","title":"Belle's staff - Beauty and the Beast Mirrorverse","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis is a digital 3D printable model of \u003cstrong\u003eBelle's staff from Mirrorverse.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThe download contains \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003epieces of the model ready to be 3D printed on a 200 mm print bed (STL) and \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efiles that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400\"\u003eAt 100% scale the model’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 316 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 1817 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 195 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eSupports 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: \u003cstrong\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704832639356,"sku":null,"price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Belle_staff-_Mirrorverse_main_3Demon_ed5bd466-9f00-4aed-a491-894a76fbe312.jpg?v=1756971207"},{"product_id":"frieren-staff-beyond-journeys-end","title":"Frieren staff - Beyond Journey's End","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a digital 3D printable model of \u003cstrong\u003eFrieren staff \u003c\/strong\u003efrom\u003cstrong\u003e Beyond Journey's End\u003c\/strong\u003e.\u003cbr\u003e\n\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe download contains \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003epieces of the model ready to be 3D printed on a 200 mm print bed (STL) and \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efiles that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe long spear files contain a verson which slides onto a 1 m long carbon or wooden rod (30 mm diameter).\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale the model’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 298 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 58 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 1782 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003cbr\u003e\n\u003c\/span\u003e For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cstrong\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704845844860,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Frieren_staff_color_2_3Demon_09cfe602-e2f6-44cc-8302-72299192c8ea.jpg?v=1756971394"},{"product_id":"ketsu-onyo-spear","title":"Ketsu Onyo Spear","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis is a digital 3D printable model of \u003cstrong\u003eKetsu Onyo Spear\u003c\/strong\u003e from \u003cstrong\u003eStar Wars: Rebels\u003c\/strong\u003e.\u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003e\n\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThe download contains \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003epieces of the model ready to be 3D printed on a 200 mm print bed (STL) and \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efiles that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eAt 100% scale the model’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 88 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 48 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 1577 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eSupports 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe use hex-pegs (included in the files) that will help you connect the cut pieces of the model. \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere.\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704846958972,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Ketsu_Onyo_spear_color_4_3Demon_661aeb49-481a-4f92-a1a9-d4241c416af8.jpg?v=1756971428"},{"product_id":"gandalf-the-grey-rivendell-staff","title":"Gandalf the Grey Rivendell Staff","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a digital 3D printable model of \u003cstrong\u003eGandalf the Grey's Rivendell Staff\u003c\/strong\u003e from \u003cstrong\u003eThe Lord of the Rings \u003c\/strong\u003ewhich he used to defeat Balrog.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/p\u003e\n\u003cp\u003eWe recommend printing the cut version and inserting a 1\/2 inch (or 12 mm) stick that is 1540 mm long into the 13 mm hole.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale, the model’s dimensions are approximate:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 190 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 83 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 1655 mm\u003cbr\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003cbr\u003e\n\u003c\/span\u003e For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cstrong\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704859378044,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Gandalf_the_Grey_Staff_color_1_3Demon_279113ee-a430-4b18-bcc9-8ccf3b2a1b31.jpg?v=1756971712"},{"product_id":"saruman-staff","title":"Saruman staff","description":"\u003cp\u003eThis is a digital 3D printable model of \u003cstrong\u003eSaruman's staff\u003c\/strong\u003e from \u003cstrong\u003eThe Lord of the Rings\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/p\u003e\n\u003cp\u003eTo reinforce the staff, you can use a long carbon or wooden rod with a diameter of 30 mm.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale the model’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 123 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 123 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 2014 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003cbr\u003e\n\u003c\/span\u003e For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtube.com\/shorts\/xAWpa2a5IOY?feature=shared\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cstrong\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704859509116,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Saruman_staff_color_1_3Demon_63d41715-0054-47fc-9cd4-d408cf932c8c.jpg?v=1756971718"},{"product_id":"marcille-staff-delicious-in-dungeon","title":"Marcille Staff - Delicious in Dungeon","description":"\u003cp\u003eThis is a digital 3D printable model of \u003cstrong\u003eMarcille Staff\u003c\/strong\u003e from \u003cstrong\u003eDelicious in Dungeon\u003c\/strong\u003e, known as '\u003cstrong\u003eDungeon Meshi\u003c\/strong\u003e' in Japanese.\u003c\/p\u003e\n\u003cp\u003eThe download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale the model’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 273 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 60 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 1400 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003cbr\u003e\n\u003c\/span\u003e For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cstrong\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704859967868,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Marcille_staff_color_1_3Demon_c91b41b6-eed3-4478-9c68-4bc0350c00d9.jpg?v=1756971730"},{"product_id":"mandalorian-beskar-spear","title":"Mandalorian Beskar Spear","description":"\u003cp\u003eThis is a digital 3D printable model of \u003cstrong\u003eMandalorian Beskar Spear\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the model’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 69 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 30 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 1990 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe use these settings for most of our prints:\u003cbr\u003e\nLayer height 0.15 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45°\u003cbr\u003e\nFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/male3dprintmodel\/the-mandalorian-armor-helmet-rifle-blaster-separately\/\"\u003e\u003cstrong\u003eCheck out the complete Mandalorian armor.\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003ca href=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2024\/05\/web_mandalorian_2_3demon.jpg\"\u003e\u003cimg class=\"alignnone wp-image-140167\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2024\/05\/web_mandalorian_2_3demon-1024x646.jpg\" alt=\"\" width=\"800\" height=\"505\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704884609404,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Mandalorian_spear_color_1_3Demon_f52719ab-e231-48c6-8b3c-e759ea2ab354.jpg?v=1756971838"},{"product_id":"radagast-the-brown-staff-the-hobbit","title":"Radagast The Brown Staff - The Hobbit","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a digital 3D printable model of \u003cspan data-sheets-root=\"1\" data-sheets-value='{\"1\":2,\"2\":\"Radagast The Brown Staff -The Hobbit\"}' data-sheets-userformat='{\"2\":14979,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":15365285},\"10\":2,\"12\":0,\"14\":{\"1\":2,\"2\":2039583},\"15\":\"\\\"Google Sans\\\"\",\"16\":9}'\u003e\u003cstrong\u003eRadagast The Brown's Staff\u003c\/strong\u003e from \u003cstrong\u003eThe Hobbit\u003c\/strong\u003e\u003c\/span\u003e .\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/p\u003e\n\u003ch2\u003eSIZE\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale, the model’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 246 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 173 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 2063 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size, the model will print well.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003cbr\u003e\n\u003c\/span\u003e For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cstrong\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704932843900,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/IMG_7564_dcf51f61-09c8-495a-82d1-050302627ea2.jpg?v=1756972020"},{"product_id":"gandalf-staff-the-hobbit","title":"Gandalf Staff - The Hobbit","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a digital 3D printable model of \u003cstrong\u003eGandalf's Staff\u003c\/strong\u003e \u003cspan data-sheets-root=\"1\" data-sheets-value='{\"1\":2,\"2\":\"Radagast The Brown Staff -The Hobbit\"}' data-sheets-userformat='{\"2\":14979,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":15365285},\"10\":2,\"12\":0,\"14\":{\"1\":2,\"2\":2039583},\"15\":\"\"Google Sans\"\",\"16\":9}'\u003efrom \u003cstrong\u003eThe Hobbit\u003c\/strong\u003e\u003c\/span\u003e .\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/p\u003e\n\u003ch2\u003eSIZE\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale, the model’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 83 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 80 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 2040 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size, the model will print well.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003cbr\u003e\n\u003c\/span\u003e For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cstrong\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704934383996,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/IMG_7457_057d0c1b-eddd-435f-9741-6610ef1d7bd6.jpg?v=1756972022"},{"product_id":"gandalf-the-white-staff","title":"Gandalf the White Staff","description":"\u003cp\u003eBring the magic of Middle-earth to your home with this 3D printable model of Gandalf's iconic white staff.\u003c\/p\u003e\n\u003ch2\u003eProduct Details:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Accuracy:\u003c\/strong\u003e Faithfully replicates Gandalf's staff from the films for an authentic look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport-Free Printing:\u003c\/strong\u003e All parts are designed to print without supports, saving you time and hassle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint Size Options:\u003c\/strong\u003e Includes pieces optimized for a 200 mm print bed and full-length files for larger printers. All cut parts are pre-arranged for easy printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Assembly Options:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint:\u003c\/strong\u003e Print a single 184 mm shaft segment 8 times and assemble with the included tube inserts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuy Tube:\u003c\/strong\u003e Use a 30 mm diameter tube (3.4 mm thick) cut to 1472 mm. You can scale the tube inserts if you have a different thickness. Attach the tip and end pieces using the tube inserts. For a 32 mm European water pipe, scale parts to 106.6% and cut the tube to 1449 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Scale:\u003c\/strong\u003e At 100%, the staff measures 1829 mm. The largest cut segment is 184 mm tall.\u003c\/li\u003e\n\u003cli\u003eYou can scale the model, but smaller sizes may affect print quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e3D Printing Settings:\u003c\/h2\u003e\n\u003cp\u003eGandalf may have fought the Balrog for it, but you only need to fight your printer settings :D\u003c\/p\u003e\n\u003cp\u003eWe used these settings:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e None needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003ch2\u003eAbout Us:\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis fan-made model was brought to life by Filip from 3Demon. We are not affiliated with the creators of the movie. We are a small group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. Join our community or explore our creations here: \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e3Demon\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704980193660,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Gandalf_White_Staff_01_3D_print_STL_icon_c75d390d-8482-4bc1-8d26-1de4b1b43e7c.jpg?v=1756972197"},{"product_id":"raccoon-palisman-staff-the-owl-house","title":"Raccoon Palisman Staff - The Owl House","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a digital 3D printable model of \u003c\/span\u003e \u003cspan style=\"color: #000000;\"\u003e\u003cb\u003eRaccoon Palisman Staff\u003c\/b\u003e\u003c\/span\u003e \u003cspan style=\"color: #000000;\"\u003e, inspired by the animated series \u003c\/span\u003e \u003cspan style=\"color: #000000;\"\u003e\u003cb\u003eThe Owl House.\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cspan style=\"color: #000000;\"\u003eIt's our unique and original design, resembling a cute raccoon. We carefully sculpted the 3D model to match the style of the other staff in the series. 🦝\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cspan style=\"color: #000000;\"\u003eThe download contains \u003c\/span\u003e \u003cspan style=\"color: #000000;\"\u003epieces of the model ready to be 3D printed on a 200 mm print bed (STL) and \u003c\/span\u003e \u003cspan style=\"color: #000000;\"\u003efiles that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003cbr\u003e\n\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cspan style=\"color: #000000;\"\u003eThe files contain 2 versions of the staff. 70 cm and 113 cm long and are split among smaller printable parts which can be connected by hexagonal pegs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/the-owl-house-palismen-collection\/\"\u003eCheck out the whole Palismen collection!\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/the-owl-house-palismen-collection\/\"\u003e\u003cimg class=\"alignnone wp-image-129324 size-large\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2023\/06\/palismen-collection-owl-house-stl-3d-print-1024x410.jpg\" alt=\"\" width=\"1024\" height=\"410\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eSIZE\u003c\/h2\u003e\n\u003cp class=\"western\"\u003e\u003cspan style=\"color: #000000;\"\u003eAt 100% scale, the Raven’s dimensions are approximately:\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eWidth\u003c\/b\u003e 86 \u003cspan style=\"font-weight: 400;\"\u003e \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eLength\u003c\/b\u003e 83 \u003cspan style=\"font-weight: 400;\"\u003e \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eHeight\u003c\/b\u003e 912 \u003cspan style=\"font-weight: 400;\"\u003e \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size, the model will print well.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use a 10 mm brim for tall parts with a small base for better bed adhesion.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe use hex-pegs (included in the files) that will help you connect the cut pieces of the model. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cstrong\u003ehere.\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55705028559228,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/WEB_owl_house_raccoon_palisman_3demon_91b8705e-a392-49ce-9c66-bf061e5739c9.jpg?v=1756972422"},{"product_id":"viktors-hex-staff-arcane-act-2","title":"Viktor's Hex Staff - Arcane Act 2","description":"\u003cp\u003e3D printable model of Viktor's Hexstaff from \u003ci\u003eArcane\u003c\/i\u003e Season 2 Act 2 —  sculpted for screen-accuracy, making it perfect for cosplay. ✨\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTotal Height:\u003c\/strong\u003e 1640 mm (64.6 inches)\u003c\/p\u003e\n\u003ch2\u003eIncluded Files:\u003c\/h2\u003e\u003cp\u003e-  \u003cstrong\u003eSTL files for standard printers\u003c\/strong\u003e – designed for printers with a max print height of 250 mm. The tallest part is 202 mm.\u003cbr\u003e- \u003cstrong\u003eSTL files for XL printers\u003c\/strong\u003e – for those with bigger machines.\u003cbr\u003e- \u003cstrong\u003e3MF files for smaller printers\u003c\/strong\u003e – pre-supported and color-coded parts included.\u003cbr\u003e- \u003cstrong\u003e3MF files for XL printers\u003c\/strong\u003e – also pre-supported and color-coded.\u003c\/p\u003e\n\u003ch2\u003eAssembly Instructions:\u003c\/h2\u003e\u003cp\u003eTo build a strong, stable final model, I recommend using a \u003cstrong\u003ewooden or metal rod\u003c\/strong\u003e - 860 mm (33.5 inches) long and 12 mm (1\/2 inch) in diameter.\u003c\/p\u003e\n\u003cp\u003eIf you’re putting the staff together just for display, you can skip the rod and use the included printed pins instead 👍\u003c\/p\u003e\n\u003ch2\u003eRecommended Print Settings:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 15%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the 3MF - \u003c\/strong\u003eFor the best results, use the provided \u003cstrong\u003epre-colored 3MF. \u003c\/strong\u003eThey're fully compatible with single-material printers too - even though colors won’t show up, the custom supports will still be there and ready to go.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis model was created by 3Demon, a group of 3D modeling and printing enthusiasts based in Prague. We’ve been making 3D printable models for over a decade. We're huge Arcane fans! Explore more of our work or join our community here:\u003ca rel=\"noopener ugc\" href=\"https:\/\/3d-mon.com\/links\/\" target=\"_blank\"\u003e 3Demon\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtube.com\/shorts\/9G2FqOqTBeU?si=QKXm6gBMDgs1yNsa\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55830381068668,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/viktor-arcane-staff-final-cover-edited-3demon-stl-3dprint.jpg?v=1759496637"},{"product_id":"kpop-demon-hunters-mira-spear","title":"KPop Demon Hunters - Mira Spear","description":"\u003cp\u003eThis is a\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eDigital 3D printable mode\u003c\/strong\u003el of Mira’s glaive,\u003cspan\u003e \u003c\/span\u003e\u003ci\u003eGok-do\u003c\/i\u003e, from KPop Demon Hunters. You can print it in translucent filament and add an LED strip for glowing effects ✨\u003c\/p\u003e\u003ch2\u003e📦 Included Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL (cut for 200mm printer beds) \u003c\/li\u003e\n\u003cli\u003eWhole uncut prop (OBJ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll cut parts are placed on the print bed just as we would print them, saving you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 56 mm (2 inches)\u003c\/li\u003e\n\u003cli\u003eLength: 266 mm (10 inches)\u003c\/li\u003e\n\u003cli\u003eHeight: 2010 mm (79 inches)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🖨 Printer Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLayer height: 0.20 mm\u003c\/li\u003e\n\u003cli\u003eInfill: 10% gyroid pattern\u003c\/li\u003e\n\u003cli\u003eSupports: 30° organic\u003c\/li\u003e\n\u003cli\u003eFor taller parts, use a brim for better bed adhesion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSettings may vary depending on your printer, so treat these as a starting point.\u003c\/p\u003e\n\u003ch2\u003e🛠 Assembly\u003c\/h2\u003e\u003cp\u003eGlue the printed parts together. To illuminate the hallowed spear, insert an LED strip inside. For added durability, reinforce the prop with a 5mm diameter metal rod, 1400 mm (55 inches) long.\u003cbr\u003e\u003cbr\u003eNo 3D printer? No problem! Search for your local 3D printing services.\u003cbr\u003e\u003cbr\u003eThis fan-made model was brought to life by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3Demon\u003c\/strong\u003e, a team of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been creating 3D printable models for over a decade, from cosplay accessories to all sorts of interesting designs.\u003c\/p\u003e\n\u003cp\u003eCheck out more of our creations or join our community\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\" rel=\"ugc\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55929829327228,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Mira_Spear_color_1_3Demon.jpg?v=1768845325"},{"product_id":"silksong-lace-pin","title":"Silksong Lace Pin","description":"\u003cp\u003eThis is a \u003cstrong\u003edigital 3D printable model\u003c\/strong\u003e of Lace’s Pin from the \u003cstrong\u003eHollow Knight Silksong\u003c\/strong\u003e video game. Designed as a body-sized cosplay prop!\u003c\/p\u003e\u003ch2\u003e📦 Included Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  STL (cut for 200mm printer beds)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  STL (cut for larger printers)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Assembled OBJ file (for easy scaling)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  3MF pre-supported, print-ready file\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  All cut parts are placed on the print bed just as we would print them, saving you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHeight: 1170 mm (46 inches)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWidth: 170 mm (6.7 inches)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThickness: 30 mm (1.2 inches)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  Feel free to scale the model to fit your needs. Learn more about sizing and scaling for cosplay \u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003e🖨️ Printer Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  Layer height: 0.15 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Infill: 10% gyroid pattern\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Supports: 30° organic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  For taller parts, use a brim for better bed adhesion\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  Settings may vary depending on your printer, so treat these as a starting point.\u003c\/p\u003e\n\u003ch2\u003e🛠️ Assembly\u003c\/h2\u003e\u003cp\u003eGlue the parts together. Hex-pegs for easy alignment are included. Insert a wooden or steel rod (12 mm \/ 0.5 in thick, up to 860 mm \/ 33.8 in long) for added strength and durability.\u003c\/p\u003e\n\u003cp\u003e  No 3D printer? No problem! Search for your local 3D printing services.\u003cbr\u003e\u003cbr\u003eThis fan-made model was brought to life by \u003cstrong\u003e3Demon\u003c\/strong\u003e, a team of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been creating 3D printable models for over a decade, from cosplay accessories to all sorts of interesting designs.\u003c\/p\u003e\n\u003cp\u003e  Check out more of our creations or join our community \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":56064797147516,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/IMG_2914.jpg?v=1764579509"},{"product_id":"flins-spear-genshin-impact","title":"Flin's Spear - Genshin Impact","description":"\u003cp\u003eThis is a \u003cstrong\u003edigital 3D printable model\u003c\/strong\u003e of \u003cstrong\u003eFlin's Spear - Bloodsoaked Ruins Polearm\u003c\/strong\u003e - from \u003cstrong\u003eGenshin Impact\u003c\/strong\u003e. Designed as a life-size cosplay prop, it features a slot for a wooden rod to reinforce the polearm. Each section includes a locking mechanism, allowing it to be dismantled for easy transport.\u003c\/p\u003e\u003ch2\u003e📦 Included Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  STL (cut for 200mm printer beds)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSTL (uncut parts for larger printers)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAssembled OBJ file (for easy scaling)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll cut parts are placed on the print bed just as we would print them, saving you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWidth: 178 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLength: 74 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHeight: 1792 mm (70 inches tall)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🖨️ Printer Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eLayer height: 0.15 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInfill: 10% gyroid pattern\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupports: 30° organic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFor taller parts, use a brim for better bed adhesion\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSettings may vary depending on your printer, so treat these as a starting point.\u003c\/p\u003e\n\u003ch2\u003e🛠️ Assembly\u003c\/h2\u003e\u003cp\u003eGlue together the parts designed for the hex pegs. Each pole section features a built-in locking mechanism, so gluing is optional and depends on how you plan to use the prop. For additional strength and durability, you can reinforce the prop with a wooden (6.8 mm \/ 0.26 inches diameter, up to 1050 mm \/ 41 in long). You can use a fishing line to attach the lantern and the gemstone. :)\u003c\/p\u003e\n\u003cp\u003eNo 3D printer? No problem! Search for your local 3D printing services.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis fan-made model was brought to life by \u003cstrong\u003e3Demon\u003c\/strong\u003e, a team of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been creating 3D printable models for over a decade, from cosplay accessories to all sorts of interesting designs.\u003c\/p\u003e\n\u003cp\u003e  ✨ Check out more of our creations or join our community \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":56131205988732,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Flin_spear_color_2_V2_3Demon.jpg?v=1766048728"},{"product_id":"kpop-demon-hunters-weapon-set","title":"KPop Demon Hunters Weapon Set","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThis set contains digital 3D models of the \u003cstrong\u003eHuntrix weapons\u003c\/strong\u003e from\u003cem\u003e \u003c\/em\u003e\u003c\/span\u003e\u003cstrong\u003eK-Pop Demon Hunters. ✨\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can read more about each of the parts by clicking through to their individual product pages. The more parts you buy the bigger the discount.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDo you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis \u003c\/span\u003e\u003cspan\u003efan-made\u003c\/span\u003e\u003cspan\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":56247899586940,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/KPop_Demon_Hunters_cosplay_props_set_1_3Demon.jpg?v=1768845081"},{"product_id":"fern-staff-frieren-beyond-journeys-end","title":"Fern staff - Frieren Beyond Journey's End","description":"\u003cp\u003eThis is a \u003cstrong\u003edigital 3D printable model\u003c\/strong\u003e of Fern’s staff from \u003cstrong\u003eFrieren: Beyond Journey's End\u003c\/strong\u003e ✨ Designed as a full-size, 55-inch-tall cosplay prop, it’s divided into color-separated sections for easy printing and assembling. Sturdy, and convention-ready.\u003c\/p\u003e\u003ch2\u003e📦 Included Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  STL (cut for 200mm printer beds) \u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Assembled OBJ file (for easy scaling)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  All cut parts are placed on the print bed just as we would print them, saving you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  Width: 170 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Length: 67 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Height: 1399 mm \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🖨️ Printer Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  Layer height: 0.15 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Infill: 10% gyroid pattern\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Supports: 30° organic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  For taller parts, use a brim for better bed adhesion\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  Settings may vary depending on your printer, so treat these as a starting point.\u003c\/p\u003e\n\u003ch2\u003e🛠️ Assembly\u003c\/h2\u003e\u003cp\u003eGlue the parts together. Insert a wooden rod (13 mm \/ 0.5 in thick, up to 866 mm \/ 34 in long) for added strength and durability.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e  No 3D printer? No problem! Search for your local 3D printing services.\u003cbr\u003e\u003cbr\u003eThis fan-made model was brought to life by \u003cstrong\u003e3Demon\u003c\/strong\u003e, a team of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been creating 3D printable models for over a decade, from cosplay accessories to all sorts of interesting designs.\u003c\/p\u003e\n\u003cp\u003e  ✨ Check out more of our creations or join our community \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtube.com\/shorts\/2wuxRnsKrvo?si=Th76dzbHeYWn8HlY\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":56413290758524,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/fern_staff_frieren_3demon_3dprint_prop_stl.jpg?v=1772171234"},{"product_id":"lythienne-dark-enchantress-staff-lords-of-the-fallen","title":"Lythienne Dark Enchantress Staff - Lords of the Fallen","description":"\u003cp\u003eThis is a \u003cstrong\u003edigital 3D printable model\u003c\/strong\u003e of \u003cstrong\u003eLythienne - The Dark Enchantress - Staff\u003c\/strong\u003e from \u003cstrong\u003eLords of the Fallen II\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003e📦 Included Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  STL (cut for 200mm printer beds) \u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Assembled OBJ file (for easy scaling)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  All cut parts are placed on the print bed just as we would print them, saving you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003e Height: 1800 mm \/ 70 inches \u003c\/p\u003e\n\u003cp\u003e  Feel free to scale the model to fit your needs. Learn more about sizing and scaling for cosplay \u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003e🖨️ Printer Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  Layer height: 0.15 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Infill: 10% gyroid pattern\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Supports: 30° organic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  For taller parts, use a brim for better bed adhesion\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  Settings may vary depending on your printer, so treat these as a starting point.\u003c\/p\u003e\n\u003ch2\u003e🛠️ Assembly\u003c\/h2\u003e\u003cp\u003eGlue the parts together. The model features alignment pegs for easy assembly. Insert a \u003cstrong\u003ewooden or steel rod\u003c\/strong\u003e (12 mm \/ 0.47 inch thick, up to 1378 mm \/ 54 inch long) for added strength and durability.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e  No 3D printer? No problem! Search for your local 3D printing services.\u003cbr\u003e\u003cbr\u003eThis fan-made model was brought to life by \u003cstrong\u003e3Demon\u003c\/strong\u003e, a team of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been creating 3D printable models for over a decade, from cosplay accessories to all sorts of interesting designs.\u003c\/p\u003e\n\u003cp\u003e  ✨ Check out more of our creations or join our community \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":56489674277244,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Dark_Enchantress_Staff_Bottom_cover_3Demon.jpg?v=1773396791"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/collections\/collection_staff.png?v=1778245106","url":"https:\/\/3d-mon.com\/collections\/staffs\/3d-printable.oembed","provider":"3Demon","version":"1.0","type":"link"}