{"title":"Pokemon Gen 2","description":"","products":[{"product_id":"chikorita","title":"Chikorita","description":"\u003cp\u003eLow poly Chikorita, the Grass-type starter, with a big curved leaf sprouting from its head. The leaf has a nice curve to it that prints without supports even though it looks like it shouldn't.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Chikorita\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (no supports)\u003c\/li\u003e\n\u003cli\u003eLeaf (no supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704551620988,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Chikorita_new_01_Polymon_wide.png?v=1762715647"},{"product_id":"bayleef","title":"Bayleef","description":"\u003cp\u003eLow poly Bayleef, with a curved neck leaf and a ring of buds around its neck. Printed in parts so you can stack the colors together, and the curved leaf prints without supports.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Bayleef\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Body part needs supports. Head leaf, head and neck leaves parts are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (needs supports)\u003c\/li\u003e\n\u003cli\u003eHead leaf (no supports)\u003c\/li\u003e\n\u003cli\u003eHead (no supports)\u003c\/li\u003e\n\u003cli\u003eNeck leaves (no supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704551686524,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Bayleef_01_Polymon_wide.png?v=1761771773"},{"product_id":"meganium","title":"Meganium","description":"\u003cp\u003eLow poly Meganium, the biggest of the Chikorita line, with a flower around its neck. Includes separate male and female versions with different antenna lengths, and the neck flower prints in two flat pieces that interlock into the flower shape.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Meganium\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Body part needs supports. Head, left antenae female, left antenae male, petals over, petals under, right antenae female and right antenae male parts are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (needs supports)\u003c\/li\u003e\n\u003cli\u003eHead (no supports)\u003c\/li\u003e\n\u003cli\u003eLeft antenae female (no supports)\u003c\/li\u003e\n\u003cli\u003eLeft antenae male (no supports)\u003c\/li\u003e\n\u003cli\u003ePetals over (no supports)\u003c\/li\u003e\n\u003cli\u003ePetals under (no supports)\u003c\/li\u003e\n\u003cli\u003eRight antenae female (no supports)\u003c\/li\u003e\n\u003cli\u003eRight antenae male (no supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704551719292,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Meganium_01_Polymon_wide.png?v=1761774982"},{"product_id":"cyndaquil","title":"Cyndaquil","description":"\u003cp\u003eLow poly Cyndaquil, the Fire-type starter. The body slides together from the side for two colors, and the flame prints with a layer color change for accurate colors, then glues on. You can also display him without the flame, since he has the holes in his back where it attaches.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Cyndaquil\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Color dark body, color light body and flame parts need supports. Body part are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (no supports)\u003c\/li\u003e\n\u003cli\u003eColor dark body (needs supports)\u003c\/li\u003e\n\u003cli\u003eColor light body (needs supports)\u003c\/li\u003e\n\u003cli\u003eFlame (needs supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704551752060,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Cyndaquil_new_01_Polymon_wide.png?v=1762715891"},{"product_id":"quilava","title":"Quilava","description":"\u003cp\u003eLow poly Quilava, with flames along its head and back. Same color setup as the rest of the line, with a layer-change flame.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Quilava\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Body, color dark body, color light body and front flame parts need supports. Back flame part are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBack flame (no supports)\u003c\/li\u003e\n\u003cli\u003eBody (needs supports)\u003c\/li\u003e\n\u003cli\u003eColor dark body (needs supports)\u003c\/li\u003e\n\u003cli\u003eColor light body (needs supports)\u003c\/li\u003e\n\u003cli\u003eFront flame (needs supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704551817596,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Quilava_01_Polymon_wide.png?v=1761774391"},{"product_id":"typhlosion","title":"Typhlosion","description":"\u003cp\u003eLow poly Typhlosion, the final Cyndaquil evolution, in a dramatic pose. Same separate flame colors as the earlier stages.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Typhlosion\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Body, dark body color and light body color parts need supports. Flame part are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (needs supports)\u003c\/li\u003e\n\u003cli\u003eDark body color (needs supports)\u003c\/li\u003e\n\u003cli\u003eFlame (no supports)\u003c\/li\u003e\n\u003cli\u003eLight body color (needs supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704551850364,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Typhlosion_02_Polymon_wide.png?v=1761773235"},{"product_id":"totodile","title":"Totodile","description":"\u003cp\u003eLow poly Totodile in a lively pose, leaning forward with its mouth open. Faceted light-blue body with small red spikes on the head and tail. Comes in two poses: standing on both feet, or with one foot raised like in the animated series. Spikes print separately in red.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Totodile\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Expressive, expressive body colors, more stability and more stability body colors parts need supports. Colors back spikes and colors tail spike parts are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eColors back spikes (no supports)\u003c\/li\u003e\n\u003cli\u003eColors tail spike (no supports)\u003c\/li\u003e\n\u003cli\u003eExpressive (needs supports)\u003c\/li\u003e\n\u003cli\u003eExpressive body colors (needs supports)\u003c\/li\u003e\n\u003cli\u003eMore stability (needs supports)\u003c\/li\u003e\n\u003cli\u003eMore stability body colors (needs supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704551883132,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Totodile_new_01_Polymon_wide.png?v=1762720071"},{"product_id":"croconaw","title":"Croconaw","description":"\u003cp\u003eLow poly Croconaw standing upright with its mouth open and tiny arms out. Blue faceted body with red spikes on the head, back, and tail. The red spikes print separately from the blue body for easy two-color printing.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Croconaw\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Colors body part needs supports. Colors back spikes, colors head spikes and colors tail spike parts are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eColors back spikes (no supports)\u003c\/li\u003e\n\u003cli\u003eColors body (needs supports)\u003c\/li\u003e\n\u003cli\u003eColors head spikes (no supports)\u003c\/li\u003e\n\u003cli\u003eColors tail spike (no supports)\u003c\/li\u003e\n\u003cli\u003eWhole model in one piece (needs supports, for single-color printing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704551915900,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Croconaw_01_Polymon_wide.png?v=1761772139"},{"product_id":"feraligatr","title":"Feraligatr","description":"\u003cp\u003eLow poly Feraligatr in a dynamic crouched pose, one arm thrown back and the other reaching forward, mouth open. Sharp faceted blue body with three sets of jagged red spikes on the head, back, and tail. The red spikes print separately so you get the two-tone look without painting.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Feraligatr\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Colors body part needs supports. Colors back spikes, colors head spikes and colors tail spikes parts are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eColors back spikes (no supports)\u003c\/li\u003e\n\u003cli\u003eColors body (needs supports)\u003c\/li\u003e\n\u003cli\u003eColors head spikes (no supports)\u003c\/li\u003e\n\u003cli\u003eColors tail spikes (no supports)\u003c\/li\u003e\n\u003cli\u003eWhole model in one piece (needs supports, for single-color printing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704551948668,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Feraligatr_01_Polymon_wide.png?v=1761772381"},{"product_id":"sentret","title":"Sentret","description":"\u003cp\u003eLow poly Sentret sitting up on its haunches with both little arms raised and big ears. Prints in a single brown color, no supports needed.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Sentret\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (no supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704551981436,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Sentret_01_Polymon_wide.png?v=1761774211"},{"product_id":"furret","title":"Furret","description":"\u003cp\u003eLow poly Furret in a long, curving S-shape, reared up at the front with its body and tail trailing behind. A single faceted brown print, no supports needed.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Furret\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (no supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552014204,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Furret_01_Polymon_wide_7c619f71-503a-4c82-820b-7ff4c529af6a.jpg?v=1761996513"},{"product_id":"hoothoot","title":"Hoothoot","description":"\u003cp\u003eLow poly Hoothoot, a round little owl standing on its single visible foot, wings tucked at its sides. A compact single-color print.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Hoothoot\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e 3MF file with custom support settings included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (needs supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552046972,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Hoothoot_01_Polymon_wide.jpg?v=1761772833"},{"product_id":"noctowl","title":"Noctowl","description":"\u003cp\u003eLow poly Noctowl, a tall owl with raised pointed ear-tufts and a faceted feather pattern down its front. One of our favorites from this generation. Prints in a single color.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Noctowl\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e 3MF file with custom support settings included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (needs supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552079740,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Noctowl_01_Polymon_wide.jpg?v=1761774754"},{"product_id":"ledyba","title":"Ledyba","description":"\u003cp\u003eLow poly Ledyba, a chunky red ladybug perched on white boxing-glove hands and feet, with little antennae. The wings and head print as one separate piece that attaches to the body.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Ledyba\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Body part needs supports. Wings and head part are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (needs supports)\u003c\/li\u003e\n\u003cli\u003eWings and head (no supports)\u003c\/li\u003e\n\u003cli\u003eWhole model in one piece (needs supports, for single-color printing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552112508,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Ledyba_01_Polymon_wide.png?v=1761775277"},{"product_id":"ledian","title":"Ledian","description":"\u003cp\u003eLow poly Ledian standing tall and slim in magenta, with four arms, antennae, and pointed shoulders. Prints as a single piece.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Ledian\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e 3MF file with custom support settings included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (needs supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552145276,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Ledian_01_Polymon_wide.png?v=1761775308"},{"product_id":"spinarak","title":"Spinarak","description":"\u003cp\u003eLow poly Spinarak, a flat-bodied green spider with all six legs splayed out. Prints in a single color, no supports needed.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Spinarak\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (no supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552178044,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Spinarak_01_Polymon_wide.png?v=1761773662"},{"product_id":"ariados","title":"Ariados","description":"\u003cp\u003eLow poly Ariados, a bright red-orange spider rearing up on its hind legs with yellow legs and a horn. The four legs print separately without supports, and a whole-piece option is included.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Ariados\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e  part need supports. Body, leg 1, leg 2, leg 3 and leg 4 parts are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (no supports)\u003c\/li\u003e\n\u003cli\u003eLeg 1 (no supports)\u003c\/li\u003e\n\u003cli\u003eLeg 2 (no supports)\u003c\/li\u003e\n\u003cli\u003eLeg 3 (no supports)\u003c\/li\u003e\n\u003cli\u003eLeg 4 (no supports)\u003c\/li\u003e\n\u003cli\u003eWhole model in one piece (needs supports, for single-color printing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552210812,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Ariados_01_Polymon_wide.jpg?v=1761771693"},{"product_id":"crobat","title":"Crobat","description":"\u003cp\u003eLow poly Crobat, a purple bat balanced on its lower wing-legs with two large upper wings spread wide. The wings print as separate colored parts for a lighter membrane against the purple body.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Crobat\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e 3MF file with custom support settings included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eCrobat (needs supports)\u003c\/li\u003e\n\u003cli\u003eWing color bottom left (needs supports)\u003c\/li\u003e\n\u003cli\u003eWing color bottom right (needs supports)\u003c\/li\u003e\n\u003cli\u003eWing color top left (needs supports)\u003c\/li\u003e\n\u003cli\u003eWing color top right (needs supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552243580,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Crobat_01_Polymon_wide.png?v=1761772106"},{"product_id":"chinchou","title":"Chinchou","description":"\u003cp\u003eLow poly Chinchou, a round blue body with two long thin antennae arcing up. The antennae print separately, with the yellow tear shapes done as a color change on the antennae. Prints without supports.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Chinchou\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (no supports)\u003c\/li\u003e\n\u003cli\u003eLeft antenna (no supports)\u003c\/li\u003e\n\u003cli\u003eRight antenna (no supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552276348,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Chinchou_01_Polymon_wide.png?v=1761771987"},{"product_id":"lanturn","title":"Lanturn","description":"\u003cp\u003eLow poly Lanturn, a blue fish-like body with a tall antenna rising from its back ending in glowing yellow orbs. The antenna and orbs print separately so you can do them in a different color.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Lanturn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e 3MF file with custom support settings included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eAntenna (needs supports)\u003c\/li\u003e\n\u003cli\u003eBack orb (needs supports)\u003c\/li\u003e\n\u003cli\u003eBody (needs supports)\u003c\/li\u003e\n\u003cli\u003eFront orb (needs supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552374652,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Lanturn_02_Polymon_wide.jpg?v=1761775368"},{"product_id":"pichu","title":"Pichu","description":"\u003cp\u003eLow poly Pichu standing upright in bright yellow with big pointed ears and tiny arms. A single-color print, no supports needed.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Pichu\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (no supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552407420,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Pichu_01_Polymon_wide.png?v=1761774648"},{"product_id":"cleffa","title":"Cleffa","description":"\u003cp\u003eLow poly Cleffa, a rounded pale-pink figure with a curled topknot and stubby limbs. One of the cute baby Pokémon from this generation. Single color, no supports needed.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Cleffa\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (no supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552472956,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Cleffa_01_Polymon_wide.png?v=1761772021"},{"product_id":"igglybuff","title":"Igglybuff","description":"\u003cp\u003eLow poly Igglybuff, a round pink body with a little curl on top and small feet. Prints in a single color, no supports needed.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Igglybuff\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (no supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552505724,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Igglybuff_01_Polymon_wide.png?v=1761775462"},{"product_id":"togepi","title":"Togepi","description":"\u003cp\u003eLow poly Togepi, an egg-shaped body with jagged shell spikes around the top and little arms. Prints in a single color with no supports needed.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Togepi\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (no supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552538492,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Togepi_01_Polymon_wide.png?v=1761773341"},{"product_id":"togetic","title":"Togetic","description":"\u003cp\u003eLow poly Togetic standing on small feet with stubby wings and spikes on its head and back. Prints as a single piece.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Togetic\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e 3MF file with custom support settings included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (needs supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552571260,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Togetic_01_Polymon_wide_new.png?v=1767375456"},{"product_id":"natu","title":"Natu","description":"\u003cp\u003eLow poly Natu, a small rounded green bird crouched low with a stubby tail and tiny wings. Single-color print, no supports needed.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Natu\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (no supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552636796,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Natu_01_Polymon_wide.png?v=1761774780"},{"product_id":"xatu","title":"Xatu","description":"\u003cp\u003eLow poly Xatu standing tall and still, with folded wings and a pointed beak. Prints in a single color.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Xatu\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e 3MF file with custom support settings included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (needs supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552669564,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Xatu_01_Polymon_wide.png?v=1761772942"},{"product_id":"mareep","title":"Mareep","description":"\u003cp\u003eLow poly Mareep, a fluffy faceted body of wool with a small face and curled ears. The legs print as one piece that attaches to the body. Body, head, and legs print separately without supports, with a whole-piece option included.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Mareep\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e  part need supports. Body, head and legs parts are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (no supports)\u003c\/li\u003e\n\u003cli\u003eHead (no supports)\u003c\/li\u003e\n\u003cli\u003eLegs (no supports)\u003c\/li\u003e\n\u003cli\u003eWhole model in one piece (needs supports, for single-color printing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552702332,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Mareep_01_Polymon_wide.png?v=1761775059"},{"product_id":"flaaffy","title":"Flaaffy","description":"\u003cp\u003eLow poly Flaaffy, a pink upright body with a tuft of wool on its head and chest, standing on two legs. Single-color print, no supports needed.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Flaaffy\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (no supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552735100,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Flaaffy_01_Polymon_wide.png?v=1761772421"},{"product_id":"ampharos","title":"Ampharos","description":"\u003cp\u003eLow poly Ampharos standing tall in yellow with a long neck, pointed ears, and a tail ending in a round tip. Prints in a single color.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Ampharos\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e 3MF file with custom support settings included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (needs supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552833404,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Ampharos_01_Polymon_wide.png?v=1761771657"},{"product_id":"bellossom","title":"Bellossom","description":"\u003cp\u003eLow poly Bellossom, a green body wrapped in a leafy skirt with bright red flowers on top. Print the body green and the flowers separately in red. All parts print without supports, with a whole-piece option included.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Bellossom\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e  part need supports. Body, flower 1 and flower 2 parts are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (no supports)\u003c\/li\u003e\n\u003cli\u003eFlower 1 (no supports)\u003c\/li\u003e\n\u003cli\u003eFlower 2 (no supports)\u003c\/li\u003e\n\u003cli\u003eWhole model in one piece (needs supports, for single-color printing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552898940,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Bellossom_01_Polymon_wide.png?v=1761771807"},{"product_id":"marill","title":"Marill","description":"\u003cp\u003eLow poly Marill, a round blue body with big ears, a white belly, and a long thin tail ending in a ball. Body, tail, and tail-ball print separately, all without supports.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Marill\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (no supports)\u003c\/li\u003e\n\u003cli\u003eTail ball (no supports)\u003c\/li\u003e\n\u003cli\u003eTail (no supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552964476,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Marill_01_Polymon_wide.png?v=1761775012"},{"product_id":"azumarill","title":"Azumarill","description":"\u003cp\u003eLow poly Azumarill, a rounder blue body with large ears and a zigzag tail tipped with a ball. The tail and ball print separately so you can assemble them onto the body.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Azumarill\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Body part needs supports. Tail ball and tail parts are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (needs supports)\u003c\/li\u003e\n\u003cli\u003eTail ball (no supports)\u003c\/li\u003e\n\u003cli\u003eTail (no supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704552997244,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Azumarill_01_Polymon_wide.png?v=1761771725"},{"product_id":"sudowoodo","title":"Sudowoodo","description":"\u003cp\u003eLow poly Sudowoodo, a brown tree-trunk body with arms spread wide, topped with green foliage clusters. Print the foliage piece 6 times. The foliage prints without supports.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Sudowoodo\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Sudowoodo part needs supports. 6x foliage part are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eSudowoodo (needs supports)\u003c\/li\u003e\n\u003cli\u003e6x foliage (no supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704553030012,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Sudowoodo_new_01_Polymon_wide.png?v=1762720779"},{"product_id":"politoed","title":"Politoed","description":"\u003cp\u003eLow poly Politoed, a green frog standing on its feet with a curled spiral sprouting from its head. The head spiral prints separately so you can do it in a different color. A whole-piece option is included.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Politoed\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Body part needs supports. Head spiral part are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (needs supports)\u003c\/li\u003e\n\u003cli\u003eHead spiral (no supports)\u003c\/li\u003e\n\u003cli\u003eWhole model in one piece (needs supports, for single-color printing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704553062780,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Politoed_01_Polymon_wide.png?v=1761774534"},{"product_id":"hoppip","title":"Hoppip","description":"\u003cp\u003eLow poly Hoppip, a small pink-and-cream body topped with large green leaves. Body and leaves print separately in different colors, both without supports.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Hoppip\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (no supports)\u003c\/li\u003e\n\u003cli\u003eLeaves (no supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704553095548,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Hoppip_01_Polymon_wide.png?v=1761775601"},{"product_id":"skiploom","title":"Skiploom","description":"\u003cp\u003eLow poly Skiploom, a round green body with a yellow flower sitting on top of its head and small leafy arms. The top flower prints separately in a different color. Both parts print without supports.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Skiploom\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (no supports)\u003c\/li\u003e\n\u003cli\u003eFlower (no supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704553292156,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Skiploom_01_Polymon_wide.png?v=1761774105"},{"product_id":"jumpluff","title":"Jumpluff","description":"\u003cp\u003eLow poly Jumpluff, a small blue body with three cream-colored puffs floating around it on thin connectors. The head puff and hand puffs print separately, with the hand puff printed 2 times. All parts print without supports.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Jumpluff\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003e2xhand puff (no supports)\u003c\/li\u003e\n\u003cli\u003eBody (no supports)\u003c\/li\u003e\n\u003cli\u003eHead puff (no supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704553324924,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Jumpluff_01_Polymon_wide.png?v=1761775430"},{"product_id":"aipom","title":"Aipom","description":"\u003cp\u003eLow poly Aipom in a lively pose with a long curling tail ending in a hand. Prints as a single piece.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Aipom\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e 3MF file with custom support settings included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (needs supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704553357692,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Aipom_02_Polymon_wide_new.png?v=1764544894"},{"product_id":"sunkern","title":"Sunkern","description":"\u003cp\u003eLow poly Sunkern, a yellow seed-shaped body with a green sprout on top. The sprout prints separately in green and the body in yellow, both without supports.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Sunkern\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (no supports)\u003c\/li\u003e\n\u003cli\u003eSprout (no supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704554111356,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Sunkern_01_Polymon_wide.png?v=1761773442"},{"product_id":"sunflora","title":"Sunflora","description":"\u003cp\u003eLow poly Sunflora, a yellow sunflower head on a green body with leafy arms. The head prints separately so you can do the flower in its own color. Body and leaves print without supports; the head needs supports.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Sunflora\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Head part needs supports. Body, left leaf and right leaf parts are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (no supports)\u003c\/li\u003e\n\u003cli\u003eHead (needs supports)\u003c\/li\u003e\n\u003cli\u003eLeft leaf (no supports)\u003c\/li\u003e\n\u003cli\u003eRight leaf (no supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704554144124,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Sunflora_01_Polymon_wide.png?v=1761773486"},{"product_id":"yanma","title":"Yanma","description":"\u003cp\u003eLow poly Yanma with a red body and four flat wings spread out, balanced on a small base. The wings, head, and legs print separately, all without supports, and the wing pattern is done with a color layer change.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Yanma\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Body part needs supports. Wing back left, wing back right, wing front left, wing front right, head, legs 1 and legs 2 parts are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eWing back left (no supports)\u003c\/li\u003e\n\u003cli\u003eWing back right (no supports)\u003c\/li\u003e\n\u003cli\u003eWing front left (no supports)\u003c\/li\u003e\n\u003cli\u003eWing front right (no supports)\u003c\/li\u003e\n\u003cli\u003eBody (needs supports)\u003c\/li\u003e\n\u003cli\u003eHead (no supports)\u003c\/li\u003e\n\u003cli\u003eLegs 1 (no supports)\u003c\/li\u003e\n\u003cli\u003eLegs 2 (no supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704554209660,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Yanma_03_Polymon_wide.png?v=1761772920"},{"product_id":"wooper","title":"Wooper","description":"\u003cp\u003eLow poly Wooper, a small blue body with a wide face and feathery gills on the sides of its head. The gills print separately on each side, all without supports.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Wooper\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (no supports)\u003c\/li\u003e\n\u003cli\u003eLeft gills (no supports)\u003c\/li\u003e\n\u003cli\u003eRight gills (no supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704554242428,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Wooper_new_01_Polymon_wide.png?v=1762720295"},{"product_id":"quagsire","title":"Quagsire","description":"\u003cp\u003eLow poly Quagsire standing upright with one arm raised, a wide flat head, and a rounded body. Prints in a single color, no supports needed.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Quagsire\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (no supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704554275196,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Quagsire_01_Polymon_wide.png?v=1761774432"},{"product_id":"espeon","title":"Espeon","description":"\u003cp\u003eLow poly Espeon, a sleek four-legged body in purple, sitting, with large ears and a forked tail. The tail prints separately so it keeps its curved shape, without supports. All \u003ca href=\"https:\/\/3d-mon.com\/products\/eeveelutions-low-poly\"\u003eEeveelutions\u003c\/a\u003e are available in the collection.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Espeon\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Body part needs supports. Tail part are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (needs supports)\u003c\/li\u003e\n\u003cli\u003eTail (no supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704554307964,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Espeon_02_Polymon_wide_new.png?v=1764545342"},{"product_id":"umbreon","title":"Umbreon","description":"\u003cp\u003eLow poly Umbreon, a sleek black four-legged body with long ears and a slim tail. Our favorite \u003ca href=\"https:\/\/3d-mon.com\/products\/eeveelutions-low-poly\"\u003eEeveelution\u003c\/a\u003e. Prints as a single piece.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Umbreon\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e 3MF file with custom support settings included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (needs supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704554340732,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Umbreon_01_Polymon_wide_new.png?v=1764546260"},{"product_id":"murkrow","title":"Murkrow","description":"\u003cp\u003eLow poly Murkrow, an angular black bird with a witch-hat crest and a feathery tail. Comes as a whole piece, with or without legs, or as separate head and body parts. Legs print without supports.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Murkrow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Body, body no legs and head parts need supports. Legs part are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (needs supports)\u003c\/li\u003e\n\u003cli\u003eBody no legs (needs supports)\u003c\/li\u003e\n\u003cli\u003eHead (needs supports)\u003c\/li\u003e\n\u003cli\u003eLegs (no supports)\u003c\/li\u003e\n\u003cli\u003eWhole model in one piece (needs supports, for single-color printing)\u003c\/li\u003e\n\u003cli\u003eWhole model in one piece (needs supports, for single-color printing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704554406268,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Murkrow_01_Polymon_wide.png?v=1761774831"},{"product_id":"slowking","title":"Slowking","description":"\u003cp\u003eLow poly Slowking, a pink seated body with a crown-like shell on its head and a collar around its neck. The shell crown and collar print separately, and the collar uses a color change to get the red-and-white pattern. Body, head, and collar print without supports.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Slowking\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e Shell part needs supports. Body, collar and head parts are support-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Multi-color: separate STL per color part, print each individually and assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL files:\u003cul\u003e\n\u003cli\u003eBody (no supports)\u003c\/li\u003e\n\u003cli\u003eCollar (no supports)\u003c\/li\u003e\n\u003cli\u003eHead (no supports)\u003c\/li\u003e\n\u003cli\u003eShell (needs supports)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF file with custom support settings and recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704554570108,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Slowking_03_Polymon_wide.png?v=1761774071"},{"product_id":"misdreavus","title":"Misdreavus","description":"\u003cp\u003eLow poly Misdreavus, a dark floating body with a collar of round beads beneath its face. Prints in a single color, no supports needed.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting Your Low Poly Misdreavus\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e No supports needed. Files labeled no_supp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor parts:\u003c\/strong\u003e Single color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e 4% of life-size. Scale up freely. The geometry holds well at larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended layer height:\u003c\/strong\u003e 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You Get: STL \u0026amp; 3MF Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTL file: single body (no supports)\u003c\/li\u003e\n\u003cli\u003e3MF file with recommended print parameters\u003c\/li\u003e\n\u003cli\u003eFiles labeled no_supp where supports are not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3D Printable Gen 2 Pokémon Bundles\u003c\/h2\u003e\n\u003cp\u003eThis model is part of our \u003ca href=\"https:\/\/3d-mon.com\/products\/low-poly-pokemon-generation-2\"\u003elow-poly Gen 2 Pokémon collection\u003c\/a\u003e. 100 Pokémon ready to print. The more you grab from the same collection, the more you save.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eQuantity from the collection\u003c\/th\u003e\n\u003cth\u003eDiscount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-14 models\u003c\/td\u003e\n\u003ctd\u003e30% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-99 models\u003c\/td\u003e\n\u003ctd\u003e50% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100+ models\u003c\/td\u003e\n\u003ctd\u003e75% off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThese are digital printable files (STL format), not physical models. This is fan-made content, not affiliated with The Pokémon Company. If you don't have a 3D printer, a local maker or print service can bring these to life for you.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704554733948,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Misdreavus_01_Polymon_wide.jpg?v=1761774868"},{"product_id":"unown","title":"Unown","description":"\u003cp\u003eUnleash your creativity and showcase your favourite messages with our collection of low poly Pokemon Unown letters. Each letter represents a unique character from the mystical Unown alphabet, allowing you to spell out words, names, or phrases that hold special meaning to you.\u003c\/p\u003e\n\u003cp\u003eChoose from versions with or without a \u003cstrong\u003ehole for magnets\u003c\/strong\u003e, and select the desired magnet size for secure attachment. Let your creativity shine and bring a touch of Pokemon magic to your world!\u003c\/p\u003e\n\u003cp\u003eThey are created in a low poly style to go with our \u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/pokemon\/\"\u003eGen 1\u003c\/a\u003e and \u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/low-poly-pokemon-generation-2\/\"\u003eGen 2\u003c\/a\u003e Pokemon collections.\u003c\/p\u003e\n\u003cp\u003eCharacters Included:\u003cbr\u003e\n- Letters A to Z\u003cbr\u003e\n- Exclamation point\u003cbr\u003e\n- Question mark\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVersions available\u003c\/strong\u003e with or without a hole for magnets\u003cbr\u003e\n• Magnet options:\u003cbr\u003e\n• Cylindrical magnets:\u003cbr\u003e\n• 3 mm diameter, 1 mm or 1.5 mm tall\u003cbr\u003e\n• 5 mm diameter, 1 mm or 1.5 mm tall\u003cbr\u003e\n• Magnet-free version for easier printing or alternative display options\u003c\/p\u003e\n\u003ch2\u003e3D printing\u003c\/h2\u003e\u003cp\u003eThese models are designed to print flat. We recommend the following print settings for optimal results:\u003cbr\u003e\n- Layer height: 0.2 mm\u003cbr\u003e\n- Infill: 15%\u003cbr\u003e\n- No brim\u003cbr\u003e\n- No supports\u003c\/p\u003e\n\u003cp\u003eTo achieve the white eye colour seen in the photos, use a layer filament change at the correct height.\u003c\/p\u003e\n\u003cp\u003eNote: Printing settings and magnet insertion process may vary depending on your specific 3D printer model and software. We used Prusa Slicer with the pause function right before the magnet hole is covered.\u003c\/p\u003e\n\u003cp\u003eGlue is needed only for the eye of the exclamation point and question mark because they have eyelids that should be black.\u003c\/p\u003e\n\u003cp\u003eIf you don't have a specific phrase in mind and want to have the flexibility to write anything, consider printing an amount of letters based on their frequency of use. For English, we recommend the following quantities:\u003c\/p\u003e\n\u003cp\u003e5 x E\u003cbr\u003e\n4 x A, I, N, O, T\u003cbr\u003e\n3 x D, H, L, R, S\u003cbr\u003e\n2 x B, C, F, G, K, M, P, U, V, W, Y, !\u003cbr\u003e\n1 x J, Q, X, Z, ?\u003c\/p\u003e\n\u003cp\u003eThe letters are scaled down to 4% of the life size of the Pokemon, resulting in a height of about 25 mm. You have the flexibility to adjust the scaling as desired. Just keep in mind that modifying the size will also affect the dimensions of the magnet hole.\u003cbr\u003e\nThis Unown alphabet is included in our collection of all 100 second generation Pokemon\u003cbr\u003e\n\u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/low-poly-pokemon-generation-2\/\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg class=\"alignnone wp-image-108924 size-medium\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2021\/12\/Pokemon_Low_Poly_3D_print_stl_gen_2_collection_01_icon-300x231.jpg\" alt=\"\" width=\"300\" height=\"231\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. You can join our community or just look at more of our creations \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704554897788,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Unown_01_Polymon_wide.png?v=1761998457"}],"url":"https:\/\/3d-mon.com\/collections\/pokemon-gen-2\/low-poly.oembed","provider":"3Demon","version":"1.0","type":"link"}