{"title":"Home page","description":null,"products":[{"product_id":"game-of-thrones-stl-got-dragon-lamp-3d-print","title":"Dragon Flame Lamp","description":"\u003cp align=\"left\"\u003eDigital 3D print model of a \u003cstrong\u003eDragon Lamp\u003c\/strong\u003e. These files are designed to work with \u003cstrong\u003eany LED lights\u003c\/strong\u003e, making them super easy to set up. 💡\u003c\/p\u003e\n\u003cp\u003eFor the larger Dragon lamp, I used the \u003ca href=\"https:\/\/www.ikea.com\/cz\/cs\/p\/koelvatten-led-bodove-osvetleni-bila-na-baterie-80568989\/\"\u003e\u003cstrong\u003eIKEA KÖLVATTEN\u003c\/strong\u003e\u003c\/a\u003e LED light, and for the smaller one, I used the \u003ca href=\"https:\/\/www.ikea.com\/cz\/cs\/p\/kapplake-led-bodove-osvetleni-bila-20543157\/\"\u003e\u003cstrong\u003eIKEA KAPPLAKE\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\n\u003cspan\u003e📦 \u003c\/span\u003eIncluded Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca name=\"_heading=h.2z2qxftbevse\"\u003e\u003c\/a\u003e Large Dragon Lamp STL files (split and pre-oriented for 220mm printer beds)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSmaller Dragon Lamp STL files (prints without cuts, also pre-oriented)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePre-supported print-ready 3MF files \u003c\/strong\u003efor both lamps\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThe large Lamp is 45 cm tall, and the smaller dragon lamp is about 22 cm. You can scale the lamps to any size you want in your slicer. :)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🖨️ 3D printing the Dragon Lamps\u003c\/h2\u003e\n\u003cp\u003eYou can use the pre-sliced 3MF files or slice the STL files yourself. As a good starting point, I recommend these settings:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eLayer height: 0.15 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInfill: 5% gyroid (for the dragons)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupports: Organic, 30°\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e5 mm brim (for the dragons)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe large dragon lamp uses \u003cstrong\u003e278 g\u003c\/strong\u003e of filament for the dragon (I used \u003cstrong\u003ePrusament Galaxy Green PLA\u003c\/strong\u003e) and \u003cstrong\u003e272 g\u003c\/strong\u003e of \u003cstrong\u003etransparent red PETG\u003c\/strong\u003e for the flame.\u003c\/p\u003e\n\u003cp\u003eOf course, you can use any colors you like! I went with green and blue dragons inspired by Vhagar and Dreamfyre.\u003cbr\u003e\u003cbr\u003eThis fan-made model was brought to life by \u003cstrong\u003e3Demon\u003c\/strong\u003e, a team of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We've also made this \u003cstrong\u003e\u003ca href=\"https:\/\/3d-mon.com\/collections\/frontpage\/products\/flying-dragon-book-nook\"\u003edragon book nook\u003c\/a\u003e\u003c\/strong\u003e that looks like it's floating around your bookshelf!\u003c\/p\u003e\n\u003cp\u003e ✨ Check out more of our creations or join our community \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtube.com\/shorts\/3PcMHK3p-Bo?is=BGDvvimgaMFOTIRc\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703816274300,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/both_dragons_3d_print_stl_file_game_of_thrones_3demon_lamp_cover.png?v=1784216407"},{"product_id":"star-gate-horus-anubis","title":"Horus, Anubis, Jaffa Guard set","description":"\u003cp data-end=\"178\" data-start=\"71\"\u003e\u003cstrong\u003eDigital 3D printable models\u003c\/strong\u003e of Jaffa helmets, armors, and props for cosplay.\u003cbr\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e\u003cstrong\u003e-  \u003c\/strong\u003eNo physical items will be shipped, physical print commissions are not available.\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-end=\"178\" data-start=\"71\"\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eWe created these files as part of our project — Anubis and Horus helmets featuring automatic face tracking , head and ear movement, and glowing eyes. ✨ \u003ca href=\"https:\/\/youtu.be\/WaTb4C7nTtg?si=nBypiukAZZeGiT9G\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eYoutube video\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-end=\"178\" data-start=\"71\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/WaTb4C7nTtg?si=-PYLrrragPldtsV1\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe design of these products is inspired by the StarGate series and films and the costume is fully wearable. These are unofficial models. We are not affiliated with MGM.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📦 Included Files\u003c\/h2\u003e\n\u003cul data-end=\"468\" data-start=\"204\"\u003e\n\u003cli data-end=\"254\" data-start=\"204\"\u003e\n\u003cp data-end=\"254\" data-start=\"206\"\u003eSTL (cut for 200mm printerswith connection hex-pegs)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"254\" data-start=\"204\"\u003e\n\u003cp data-end=\"254\" data-start=\"206\"\u003eOBJ (uncut for larger printers and scaling)\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eScaled to fit a 170-190 cm tall body with room for padding.\u003cbr data-end=\"562\" data-start=\"559\"\u003eFeel free to resize to your needs. Learn more about scaling for cosplay \u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cul data-end=\"858\" data-start=\"672\"\u003e\n\u003cli data-end=\"697\" data-start=\"672\"\u003e\n\u003cp data-end=\"697\" data-start=\"674\"\u003eLayer height: 0.20 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"713\" data-start=\"698\"\u003e\n\u003cp data-end=\"713\" data-start=\"700\"\u003eInfill: 10% gyroid\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"731\" data-start=\"714\"\u003e\n\u003cp data-end=\"731\" data-start=\"716\"\u003eSupports: 30°\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"858\" data-start=\"732\"\u003e\n\u003cp data-end=\"858\" data-start=\"734\"\u003eUse a 10 mm brim for tall, narrow parts\u003cbr data-end=\"776\" data-start=\"773\"\u003e(Settings may vary depending on your printer – treat these as a starting point.)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🛠️ Assembly Instructions\u003c\/h2\u003e\u003cp\u003eParts glue together with included hex-pegs for alignment. Bigger sections screw together with bolts and screws. For added strength, melt the seams with solder tool.\u003c\/p\u003e\n\u003cp data-end=\"1265\" data-start=\"1002\"\u003eThis fan-made model was created by \u003cstrong data-end=\"1047\" data-start=\"1037\"\u003e3Demon\u003c\/strong\u003e, a Prague-based team of 3D artists and cosplay makers. We’ve been designing printable props and armor for over a decade.\u003cbr data-end=\"1171\" data-start=\"1168\"\u003eCheck out more of our creations or join our community 👉 \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere.\u003c\/a\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704544706940,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Stargate_horus_anubis_main2_a4b88f57-1945-4e87-a908-a60af5528868.jpg?v=1756968232"},{"product_id":"chainsaw-man-pochita","title":"Chainsaw Man Cosplay Set","description":"\u003cp\u003eDigital 3D printable models of the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eChainsaw Man’s Demon Form Head and Arms\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand his companions\u003cspan\u003e and enemies \u003c\/span\u003efrom the manga and  anime Chainsaw Man.\u003c\/p\u003e\n\u003cp\u003eThe download contains pieces of the models ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eWe use these settings for most of our prints:\u003cbr\u003eLayer height 0.2 mm\u003cbr\u003eInfill 15%\u003cbr\u003eSupports 45°\u003cbr\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modelling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for over 10 years. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003eSocial Media Links\u003c\/a\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704606867836,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/COVER_chainsaw_man_reze_galgali_cosplay_3d_printed_helmet_maska_collection_discount_3demon.jpg?v=1784290183"},{"product_id":"mass-effect-commander-shepard-cosplay-collection","title":"Mass Effect Commander Shepard Cosplay Collection","description":"\u003cp\u003eThis is a digital 3D printable model of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMass Effect Commander Shepard Cosplay Collection\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efrom\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMass Effect\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eThe collection contains:\u003c\/h2\u003e\u003cp\u003e• N7 Female Shepard Armor\u003cbr\u003e• N7 Male Shepard Armor\u003cbr\u003e• N7 Helmet\u003cbr\u003e• M-5 Phallanx pistol\u003cbr\u003e• Black Widow rifle\u003c\/p\u003e\n\u003ch2\u003eSIZE\u003c\/h2\u003e\u003cp\u003eAt 100% scale, the armor dimensions are scaled to a 170 cm tall person (about 5 ½ feet). You can scale the model as you wish but we can’t guarantee that at a much smaller size, the model will print well. You can scale the model as you wish but we can’t guarantee that at a much smaller size, the model will print well. We create our 3D models on our average-sized body template. \u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003eRead about the sizing and how to scale the models to fit your body here\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003e3D PRINTING SETTINGS\u003c\/h2\u003e\u003cp\u003eWe use these settings for most of our prints:\u003cbr\u003eLayer height 0.20 mm\u003cbr\u003eInfill 15%\u003cbr\u003eSupports 45°\u003cbr\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model. The best way to attach the amror pieces is using velcro straps and rubber cords.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003emore of our creations here!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55705076007292,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/3-2_1c98fd70-d513-46ca-911a-7f0d13ce3634.jpg?v=1756972652"},{"product_id":"slay-the-spire-silent-skull-mask","title":"Slay the Spire Silent Skull Mask","description":"\u003cp align=\"left\"\u003eThis is a \u003cstrong\u003edigital 3D printable model\u003c\/strong\u003e of\u003cstrong\u003e The Silent’s Mask\u003c\/strong\u003e from \u003cstrong\u003eSlay the Spire 2\u003c\/strong\u003e - including a \u003cstrong\u003ebelt accessory\u003c\/strong\u003e and Slay the Spire 1 mask version.\u003cbr\u003e\u003cbr\u003e📦 \u003cstrong\u003eIncluded 3D print files\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  STL (cut for 200mm printer beds)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e STL (cut for larger printers)\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Assembled OBJ file (for easy scaling)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e3MF pre-supported, print-ready file for Prusa XL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  All cut parts are placed on the print bed just as we would print them, saving you time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSlay the Spire 1 option:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e Skull mask with cervical vertebrae (for connecting the full spine)\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSimple horns\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSingle vertebra parts to build the full spine\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePerforated visor for eyes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSlay the Spire 2 option: (in the photos)\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerforated visor for eyes\u003c\/li\u003e\n\u003cli\u003eSkull mask without cervical vertebrae (fits better under a hood)\u003c\/li\u003e\n\u003cli\u003eDouble horns\u003c\/li\u003e\n\u003cli\u003eSingle vertebra part for a wearable spine belt\u003c\/li\u003e\n\u003cli\u003eFlame eyes + optional connector for LED\/balloon light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe mask design is the same in both versions - the main difference is the attached vertebrae for the spine. \u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e Width: 87 mm (3,42 inches)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLength: 252 mm (9,92 inches)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHeight: 254 mm (10 inches) \u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  Feel free to scale the model to fit your needs. Learn more about sizing and scaling for cosplay \u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003e🖨️ Printer Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  Layer height: 0.15 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Infill: 10% gyroid pattern\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Supports: 30° organic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e filament recommendation: Bambu White Oak matte PLA and Translucent Prusament PETG Neon Green\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eUsed filament for the mask:  704 g, including supports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  Settings may vary depending on your printer, so treat these as a starting point.\u003c\/p\u003e\n\u003ch2\u003e🛠️ Assembly\u003c\/h2\u003e\u003cp\u003eGlue the parts with superglue, then seal with clear spray paint. Add some darker brown weathering using watered-down acrylics. For the eyes, use simple balloon LEDs or make your own circuit. The spine belt is just held together with a cord (any kind works).\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e  No 3D printer? No problem! Search for your local 3D printing services.\u003cbr\u003e\u003cbr\u003eThis fan-made model was brought to life by \u003cstrong\u003e3Demon\u003c\/strong\u003e, a team of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been creating 3D printable models for over a decade, from cosplay accessories to all sorts of interesting designs.\u003c\/p\u003e\n\u003cp\u003e  ✨ Check out more of our creations or join our community \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtube.com\/shorts\/BKdLSOWO8yM?si=RNu6YAFnjTt_x9LC\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":56527011381628,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Still2026-03-18085603_1.30.1.png?v=1774250294"},{"product_id":"pocket-monster-gen-1","title":"Pocket Monsters Gen 1","description":"\u003cp data-end=\"299\" data-start=\"124\"\u003eThis is a \u003cstrong data-end=\"226\" data-start=\"134\"\u003ecomplete unofficial low-poly 3D printable collection of all 151 first-generation Pocket Monsters\u003c\/strong\u003e! Every single one is ready for you to download, print, and display.\u003c\/p\u003e\n\u003cp data-end=\"640\" data-start=\"301\"\u003eIt took almost a year to design and refine this collection. We carefully balanced the polygon sizes so that the entire set works beautifully together — smaller Pocket Monster use fewer polygons, while the larger ones are more detailed. Many models were test-printed and tweaked multiple times to make sure they look great and print reliably. 🖤\u003c\/p\u003e\n\u003cp data-end=\"860\" data-start=\"642\"\u003eSome Pocket Monster even include \u003cstrong data-end=\"689\" data-start=\"668\"\u003egender variations\u003c\/strong\u003e, which are automatically included with your download.\u003cbr data-end=\"746\" data-start=\"743\"\u003eYou can also check out our \u003ca href=\"https:\/\/youtu.be\/rCXehTpuyn8\" target=\"_blank\"\u003e\u003cstrong data-end=\"790\" data-start=\"773\"\u003evideo Pokédex\u003c\/strong\u003e on YouTube\u003c\/a\u003e 🎥, where each Pocket Monster is timestamped for easy browsing.\u003c\/p\u003e\n\u003cp data-end=\"1107\" data-start=\"862\"\u003eThe models are scaled to \u003cstrong data-end=\"906\" data-start=\"887\"\u003e4% of life-size\u003c\/strong\u003e Pocket Monster, making the full collection easy to display on a shelf. 🖼️ You can scale them up if you prefer — they’ve only been test-printed at the default size, but larger prints should work just fine.\u003c\/p\u003e\n\u003ch2 data-end=\"1132\" data-start=\"1109\"\u003e\u003cstrong data-end=\"1130\" data-start=\"1109\"\u003ePrinting details:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul data-end=\"1479\" data-start=\"1133\"\u003e\n\u003cli data-end=\"1215\" data-start=\"1133\"\u003e\n\u003cp data-end=\"1215\" data-start=\"1135\"\u003eMany Pocket Monster have \u003cstrong data-end=\"1177\" data-start=\"1153\"\u003eseparate color parts\u003c\/strong\u003e for easier multi-color printing. 🌈\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1314\" data-start=\"1216\"\u003e\n\u003cp data-end=\"1314\" data-start=\"1218\"\u003eEvery model includes a \u003cstrong data-end=\"1253\" data-start=\"1241\"\u003e3MF file\u003c\/strong\u003e with custom support settings for those that need supports.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1399\" data-start=\"1315\"\u003e\n\u003cp data-end=\"1399\" data-start=\"1317\"\u003eFiles that don’t require supports are labeled with \u003cstrong data-end=\"1379\" data-start=\"1368\"\u003eno_supp\u003c\/strong\u003e in the file name.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1479\" data-start=\"1400\"\u003e\n\u003cp data-end=\"1479\" data-start=\"1402\"\u003eFor the best results, we recommend printing at \u003cstrong data-end=\"1473\" data-start=\"1449\"\u003e0.15 mm layer height\u003c\/strong\u003e. ⚙️\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1500\" data-start=\"1481\"\u003eLooking for more?\u003c\/p\u003e\n\u003cul data-end=\"1706\" data-start=\"1501\"\u003e\n\u003cli data-end=\"1601\" data-start=\"1501\"\u003e\n\u003cp data-end=\"1601\" data-start=\"1503\"\u003eThe \u003cstrong data-end=\"1532\" data-start=\"1507\"\u003efull Gen 2 collection\u003c\/strong\u003e is available \u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/low-poly-Pocket%20Monster-generation-2\/\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/low-poly-Pocket%20Monster-generation-2\/\"\u003e\u003cimg height=\"231\" width=\"300\" alt=\"\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2021\/12\/low-poly-Pocket%20Monster-gen-2-3D-print-icon-small-300x231.jpg\" class=\"alignnone size-medium wp-image-75686\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1706\" data-start=\"1602\"\u003e\n\u003cp data-end=\"1706\" data-start=\"1604\"\u003e\u003cstrong data-end=\"1621\" data-start=\"1604\"\u003eGen 3 Pocket Monster\u003c\/strong\u003e are gradually rolling out on \u003ca href=\"https:\/\/thangs.com\/designer\/Polymon\" rel=\"noopener\" class=\"decorated-link\" data-end=\"1700\" data-start=\"1651\"\u003e\u003cstrong data-end=\"1662\" data-start=\"1652\"\u003eThangs\u003c\/strong\u003e\u003cspan class=\"ms-0.5 inline-block align-middle leading-none\" aria-hidden=\"true\"\u003e\u003csvg class=\"block h-[0.75em] w-[0.75em] stroke-current stroke-[0.75]\" data-rtl-flip=\"\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"currentColor\" viewbox=\"0 0 20 20\" height=\"20\" width=\"20\"\u003e\u003cpath d=\"M14.3349 13.3301V6.60645L5.47065 15.4707C5.21095 15.7304 4.78895 15.7304 4.52925 15.4707C4.26955 15.211 4.26955 14.789 4.52925 14.5293L13.3935 5.66504H6.66011C6.29284 5.66504 5.99507 5.36727 5.99507 5C5.99507 4.63273 6.29284 4.33496 6.66011 4.33496H14.9999L15.1337 4.34863C15.4369 4.41057 15.665 4.67857 15.665 5V13.3301C15.6649 13.6973 15.3672 13.9951 14.9999 13.9951C14.6327 13.9951 14.335 13.6973 14.3349 13.3301Z\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/a\u003e! 🎉\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1941\" data-start=\"1708\"\u003ePlease note: This is a \u003cstrong data-end=\"1762\" data-start=\"1731\"\u003edigital product (STL files)\u003c\/strong\u003e, not a physical item. These fan-made models are not affiliated with the Pocket Monster Company. If you don’t have a 3D printer, try reaching out to a local maker or print service. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":57154854879612,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/3Demon-pokemon-low-poly-main-scaled_e7a7335f-9e89-4d30-a85c-709f3acbc218.jpg?v=1756927743"},{"product_id":"arcane-jinx-fishbones-rocketlauncher","title":"Arcane - Jinx Fishbones rocket launcher","description":"\u003cp\u003eA digital 3D printable model of \u003cstrong\u003eJinx's rocket launcher\u003c\/strong\u003e, Fishbones, with an \u003cstrong\u003eopening jaw\u003c\/strong\u003e from TV series's \u003cstrong\u003eArcane:\u003c\/strong\u003e Battle Arena.\u003cbr\u003eThe download includes both cut parts for a 250 mm print bed, and the full, uncut model. All parts are arranged for optimal printing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur Fishbones is sculpted with the highest attention to detail, creating a perfect Arcane replica\u003c\/li\u003e\n\u003cli\u003eFeatures an openable jaw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSIZE\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale the model’s dimensions are approximately:\u003cbr\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e 292 mm\u003cbr\u003e\u003cstrong\u003eLength\u003c\/strong\u003e 1310 mm\u003cbr\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e 582 mm\u003cbr\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size, the model will print well.\u003c\/p\u003e\n\u003ch2\u003e3D PRINTING SETTINGS\u003c\/h2\u003e\u003cp\u003eWe use these settings for most of our prints:\u003cbr\u003eLayer height 0.2 mm\u003cbr\u003eInfill 15%\u003cbr\u003eSupports 45°\u003cbr\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003ch2\u003eASSEMBLY\u003c\/h2\u003e\n\u003ch2\u003eYou will need:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eTwo M6 screws\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e9 M3 screws (35 mm or longer)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuper glue\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli data-start=\"1259\" data-end=\"1315\"\u003eStart with the \u003cstrong data-start=\"1277\" data-end=\"1291\"\u003eFront Ring\u003c\/strong\u003e—it’s flat and stable.\u003c\/li\u003e\n\u003cli data-start=\"1316\" data-end=\"1418\"\u003eStack and attach each component \u003cstrong data-start=\"1351\" data-end=\"1378\"\u003eone on top of the other\u003c\/strong\u003e until you reach the \u003cstrong data-start=\"1399\" data-end=\"1415\"\u003eBrass Ring-2\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli data-start=\"1419\" data-end=\"1514\"\u003eSome parts come in multiple pieces (top\/bottom or left\/right). \u003cstrong data-start=\"1485\" data-end=\"1512\"\u003eTest-fit before gluing.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1515\" data-end=\"1572\"\u003e\n\u003cstrong data-start=\"1518\" data-end=\"1530\"\u003eTop grip\u003c\/strong\u003e is secured by two \u003cstrong\u003eM6 screws \u003c\/strong\u003eand goes through the blue cover into the middle body tube.\u003c\/li\u003e\n\u003cli data-start=\"1515\" data-end=\"1572\"\u003eUpper jaw is connected to the neck using four M3 screws for the simple opening mechanism\u003c\/li\u003e\n\u003cli data-start=\"1661\" data-end=\"1727\"\u003e\n\u003cstrong data-start=\"1664\" data-end=\"1676\"\u003eThe Neck\u003c\/strong\u003e fits into the \u003cstrong data-start=\"1691\" data-end=\"1705\"\u003eFront Ring\u003c\/strong\u003e for final assembly with five M3 screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/p\u003e\n\u003cp\u003eWe’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003ehttps:\/\/youtu.be\/anZnWpDJ_e4?feature=shared\u003cbr\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":57154922938748,"sku":null,"price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/PXL_20250304_130323025_a1d788b7-a696-44f3-a4b7-c82070ca4366.jpg?v=1764231613"},{"product_id":"distant-galaxy-100-blasters-collection","title":"Distant Galaxy 100+ Blasters Collection","description":"\u003cp data-end=\"253\" data-start=\"192\"\u003e100+ \u003cstrong data-end=\"236\" data-start=\"197\"\u003edigital 3D-printable blaster models\u003c\/strong\u003e from Distant Galaxy. At \u003cstrong data-end=\"758\" data-start=\"744\"\u003e100% scale\u003c\/strong\u003e, the blasters are approximately the \u003cstrong data-end=\"825\" data-start=\"795\"\u003esame size as in the movies.\u003c\/strong\u003e You can freely \u003cstrong data-end=\"868\" data-start=\"848\"\u003escale the models\u003c\/strong\u003e to fit your needs.\u003cbr\u003eSTL files are \u003cstrong data-end=\"530\" data-start=\"512\"\u003enamed to match\u003c\/strong\u003e the parts in the included blueprint images. This makes it easier to \u003cstrong data-end=\"631\" data-start=\"606\"\u003eassemble your blaster\u003c\/strong\u003e step by step. All cut pieces are already positioned on the print bed, saving you time.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul data-end=\"473\" data-start=\"190\"\u003e\n\u003cli data-end=\"315\" data-start=\"254\"\u003e\n\u003cp data-end=\"315\" data-start=\"256\"\u003eSplit into parts ready to print on a 200 mm print bed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"363\" data-start=\"316\"\u003e\n\u003cp data-end=\"363\" data-start=\"318\"\u003e\u003cstrong data-end=\"333\" data-start=\"318\"\u003eFull models\u003c\/strong\u003e (uncut) for larger printers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"410\" data-start=\"364\"\u003e\n\u003cp data-end=\"410\" data-start=\"366\"\u003e\u003cstrong data-end=\"386\" data-start=\"366\"\u003eBlueprint images\u003c\/strong\u003e to help with assembly\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"473\" data-start=\"411\"\u003e\n\u003cp data-end=\"473\" data-start=\"413\"\u003eA \u003cstrong data-end=\"436\" data-start=\"415\"\u003efree holder\/stand\u003c\/strong\u003e for your blasters \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cul data-end=\"1036\" data-start=\"942\"\u003e\n\u003cli data-end=\"971\" data-start=\"942\"\u003e\n\u003cp data-end=\"971\" data-start=\"944\"\u003eLayer Height: \u003cstrong data-end=\"969\" data-start=\"958\"\u003e0.15 mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1006\" data-start=\"972\"\u003e\n\u003cp data-end=\"1006\" data-start=\"974\"\u003eInfill: \u003cstrong data-end=\"1004\" data-start=\"982\"\u003e15% gyroid pattern\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1036\" data-start=\"1007\"\u003e\n\u003cp data-end=\"1036\" data-start=\"1009\"\u003eSupports: \u003cstrong data-end=\"1034\" data-start=\"1019\"\u003e35° organic\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1060\" data-start=\"1038\"\u003e💼 Commercial Use:\u003c\/p\u003e\n\u003cul data-end=\"1248\" data-start=\"1061\"\u003e\n\u003cli data-end=\"1092\" data-start=\"1061\"\u003e\n\u003cp data-end=\"1092\" data-start=\"1063\"\u003e✅ No extra license required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1181\" data-start=\"1093\"\u003e\n\u003cp data-end=\"1181\" data-start=\"1095\"\u003eYou may \u003cstrong data-end=\"1132\" data-start=\"1103\"\u003esell your physical prints\u003c\/strong\u003e, as long as you \u003cstrong data-end=\"1179\" data-start=\"1149\"\u003elink back to our STL files\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1248\" data-start=\"1182\"\u003e\n\u003cp data-end=\"1248\" data-start=\"1184\"\u003ePlease \u003cstrong data-end=\"1214\" data-start=\"1191\"\u003euse your own photos\u003c\/strong\u003e of printed models — not our images 📸\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":57154960359804,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Blasters-graphics-main-icon-to-the-edge_0e40b240-dce0-4ddc-bdb8-a9a33c4d3e47.jpg?v=1756967823"}],"url":"https:\/\/3d-mon.com\/collections\/frontpage\/flame.oembed","provider":"3Demon","version":"1.0","type":"link"}