{"title":"Figures","description":"","products":[{"product_id":"ecorche-for-printing-3d-print-model","title":"Ecorche for printing","description":"\u003cp data-end=\"45\" data-start=\"0\"\u003eDigital 3D printable model of a \u003cstrong\u003emale body \u003c\/strong\u003e- an \u003cstrong\u003ee\u003c\/strong\u003e\u003cstrong data-end=\"44\" data-start=\"33\"\u003ecorche figure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-is-only-node=\"\" data-is-last-node=\"\" data-end=\"269\" data-start=\"47\"\u003eAn \u003cstrong data-end=\"61\" data-start=\"50\"\u003eécorché\u003c\/strong\u003e is a figure shown without skin, revealing the underlying muscles and skeletal structure. It is commonly used in figure drawing, anatomy studies, and sculpture to better understand human form and musculature.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis STL file is divided into two parts. You can scale the model to your desired size in your slicer.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e Layer height: 0.15 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e Infill: 20% gyroid pattern\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e Supports: 30° organic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703791305084,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Ecorche_base_2_3Demon_2509dba5-f805-44bf-be0d-a399d66de459.jpg?v=1756926429"},{"product_id":"warrior-on-horse-kit-for-3d-printing-3d-print-model","title":"Warrior on Horse Statue","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is 3D printable model of Warrior on Horse ready to be 3D printed and painted as you desire\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFiles contain \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003epieces of\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e the model (both STL and OBJ) ready to be 3D printed \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eand 3D model files that are not cut into smaller pieces (both STL and OBJ)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=UKa8QoAGXyI\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe total dimensions are approx.:\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWidth: 120 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLength: 192 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHeight: 200 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ebut you can scale the model according to your needs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe recommend a layer height \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eof 0.1\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e to \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e0.3\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIf you’d like to suggest what we should do next, check out our \u003ca href=\"https:\/\/3d-mon.com\/preorder\/\"\u003epre-order\u003c\/a\u003e page and fill in your suggestion: 3d-mon.com\/preorder\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis model was created by\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e Vojtěch Severa.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703804150140,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/ss-01-1_d442ead2-57a6-439e-8adf-54127dffd442.png?v=1756926732"},{"product_id":"vault-boy-3d-print-model","title":"Vault Boy Bobblehead figures - Fallout","description":"\u003cp\u003eCollection of \u003cstrong\u003edigital 3D printable\u003c\/strong\u003e models of the \u003cstrong\u003eVault Boy Bobblehead figures\u003c\/strong\u003e from\u003cstrong\u003e Fallout 4.\u003cbr\u003e\n\u003c\/strong\u003eVault Boy is the mascot character of the Vault-Tec corporation within the Fallout universe.\u003cbr\u003e\nThe download contains \u003cstrong\u003e6 figures\u003c\/strong\u003e representing the following perks:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrenght\u003c\/li\u003e\n\u003cli\u003ePerception\u003c\/li\u003e\n\u003cli\u003eRepair\u003c\/li\u003e\n\u003cli\u003eEndurance\u003c\/li\u003e\n\u003cli\u003eMelee\u003c\/li\u003e\n\u003cli\u003eEnergy Weapons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale, the figures dimensions are:\u003cbr\u003e\nLength approx. 60 mm (2,32 inches)\u003cbr\u003e\nHeight approx.107 mm (4,25 inches)\u003c\/p\u003e\n\u003cp\u003eYou can scale the model according to your liking.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe recommend a layer height of 0.1 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Printing settings will vary greatly depending on your specific printer. Supports: 30-45°.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703808246140,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/vault_bobblehead_stl_3demon_3dprint_cover_8d736447-6dad-42e4-8e44-2e37530d2d8c.jpg?v=1756926996"},{"product_id":"bumblebee-bust","title":"Bumblebee bust","description":"\u003cp\u003eThis is a \u003cstrong\u003edigital 3D model of a bust of the adorable Bumblebee\u003c\/strong\u003e from the 2018 movie where he transforms into a VW Beetle.\u003c\/p\u003e\n\u003cp\u003eThis model is a half statue of bumblebee standing on a tire. This is not an easy print but should be well worth the effort.\u003c\/p\u003e\n\u003cp\u003eFiles contain the complete Bumblebee bust ready to print and also sliced model \u003cspan class=\"tlid-translation translation\" lang=\"en\"\u003e\u003cspan class=\"\" title=\"\"\u003e with joints. So model can be movable.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale the busts dimensions are:\u003c\/p\u003e\n\u003cp\u003eWidth approx. 204 mm (8 inches)\u003c\/p\u003e\n\u003cp\u003eLength approx. 183 mm (7.2 inches)\u003c\/p\u003e\n\u003cp\u003eHeight approx. 200 mm (7.9 inches)\u003c\/p\u003e\n\u003cp\u003eYou can scale the model according as you like so it fits your printer.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eWe recommend a layer height of 0.1 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. This model needs supports to print well. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703813816700,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/bumblebee_bust_renders_2-main_render.19_d42ba59b-4772-4567-9b24-6802c913c724.png?v=1756927226"},{"product_id":"fortnite-banana-peely-figure-3dprint","title":"Peely - Fortnite Banana Figure","description":"\u003cp\u003ePeely figure from Fortnite in three poses\u003c\/p\u003e\n\u003cp\u003ePeely is one of the coolest skins from the popular game Fortnite.\u003c\/p\u003e\n\u003cp\u003eThis model is a figure. A banana on skinny legs doesn’t make a very stable character but he stands :)\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eYou can scale the model as you like\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe recommend a layer height of 0.1 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. For reliable printing, we also recommend setting a brim. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703815848316,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/IMG_20190316_155210_a6ff9f12-5fea-48e1-be71-78eb92e14873.jpg?v=1756927492"},{"product_id":"game-of-thrones-stl-got-dragon-lamp-3d-print","title":"Game of Thrones Dragon - 3D print Figure and Lamp","description":"\u003cp\u003e\u003cstrong\u003eDragon with Flames - Lamp or Figure - GAME OF THRONES 3D PRINT MODEL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInstructions on assembling can be found \u003ca href=\"https:\/\/www.instructables.com\/id\/3D-Printed-Dragon-Lamp\/\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThis product is a digital 3D model ready to be 3D printed not a physical product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/g3HH10yAMmc\u003c\/p\u003e\n\u003cp\u003eThis is a model of Game of Thrones Dragons with different kinds of options.\u003cbr\u003e\n-with or without the Night King riding on its back\u003cbr\u003e\n-2 different kinds of flames (one straight flamethrower and one in between that is on most pictures and can easily stand on a flat surface)\u003cbr\u003e\n-with or without the option of having it prepared for the insertion of an LED for lighting (pre-cut holes and easy assembly)\u003cbr\u003e\n-a high polygon version for detailed printing\u003cbr\u003e\n-a pre-cut versions of the dragon so it needs less supports and so you can print it bigger with you given surface are (wings separate and body in three parts)\u003c\/p\u003e\n\u003cp\u003eFiles contain different versions of the Go T dragons and flames. The dragons also included cut into smaller parts in stl format.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/6eQwWavuw24\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eThe main scale of the dragons is 250 mm (which fits diagonally on a Prusa sized printer) wide.\u003cbr\u003e\nYou can scale the model to any size you like. It is in high detail so you can enlarge if you like.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eWe printed the dragon with Fillamentum's PLA. We recommend a layer height of 0.05 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Some parts of the dragon definitely need supports. For reliable printing, we also recommend setting a brim to some of the parts. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer. For printing the straight flame without supports in the top part to print for a lamp I recommend splitting the print into two processes where you would use supports in the bottom part to be able to print the vertical surface and then leave the straight part without supports so it looks nicer and carries light better.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003cbr\u003e\nhttps:\/\/3d-mon.com\/links\/\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703816274300,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/IMG_20190329_133539_b7b7aa0a-450e-4891-a15d-1bf5f5b043b7.jpg?v=1764231748"},{"product_id":"pat-a-mat-figurky-3d-tisk-stl-print","title":"Pat \u0026 Mat Figures","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePat a Mat Figures\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese two models are figures based on animated short films made in the Czech Republic.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eFigurky Českých Kutilů Pata a Mata\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\nFiles contain \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eeach of the figures in one piece.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model as you like\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe recommend a layer height \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eof 0.1\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e to \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e0.2\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e mm on FDM printers. You can paint the print like you see on the pictures if you want to. This is not a multicolor print. All parts are aligned to the printing platform for easy manipulation. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eFor reliable printing, we also recommend setting a brim to the figures, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e. Printing settings will vary greatly depending on your specific printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703816405372,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/patmat-foto-main-1_0ad267a2-dff1-469a-94fb-8d0c081aae72.png?v=1756927541"},{"product_id":"ragnaros-lamp-firelord-demon-3d-print-figure-and-lamp-copy","title":"Firelord Figure and Lamp - Ragnaros","description":"\u003cp\u003eRagnaros lamp figure - 3D PRINT MODEL\u003c\/p\u003e\n\u003cp\u003eYou can simply print this model or add electronics and use it as a lamp. If you want to sell the printed parts we don’t mind that but you have to use photos of your own prints and link to where people can get the digital files.\u003c\/p\u003e\n\u003cp\u003eIn this video you can see how it was put together with IKEA LED candle lights but you can simply put an LED in base base and it will glow nicely as well (the dark orange pictures above)\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=eywexbR9AnE\u0026amp;feature=youtu.be\u0026amp;fbclid=IwAR3Dc5qHeOipeeifeRdS8jWWF7f3ivb17x3361JMzGF25qfZFa61an9QXbE\u003c\/p\u003e\n\u003cp\u003eRagnaros the Firelord is an incredibly powerful Elemental Lord and master of all fire elementals.\u003c\/p\u003e\n\u003cp\u003eThese are digital files only. This model is a high detailed figure inspired by the powerful Ragnaros from World of Warcraft and model is meant to be post-processed. Model is designed for implementing led light.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the figure ready to be 3D printed and complete figure files that are not cut into smaller pieces. In the pictures it is printed from Fillamentum PLA filaments Crystal Clear and Vertigo Galaxy.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the figure’s dimensions are:\u003cbr\u003e\nWidth approx. 214 mm\u003cbr\u003e\nLength approx. 155 mm\u003cbr\u003e\nHeight approx. 200 mm\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe recommend a layer height of 0.2 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the model shell parts, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eIf you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com\/preorder\u003c\/p\u003e\n\u003cp\u003eThis model was created by Jose from our 3 Demon team. It is fan-made.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703818469756,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/cults-deamon-fire-night_5ecdb439-ed2e-4f15-a13f-a20119056d7b.jpg?v=1756927687"},{"product_id":"seahorse-beast-dnd","title":"Seahorse Beast","description":"\u003cp class=\"western\" align=\"left\"\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003eThis is a \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cb\u003edigital 3D printable\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003e model of \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-family: Lato, apple-system, BlinkMacSystemFont, Segoe UI, Helvetica Neue, Arial, sans-serif;\"\u003e\u003cspan style=\"font-size: small;\"\u003eSeahorse Beast\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003eThis model is meant to be a figure piece for DnD games, but you can use it for something else too. \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch2\u003e📦 Included Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  \u003cspan style=\"font-family: Calibri, serif;\"\u003e\u003cspan style=\"font-size: small;\"\u003eSTL (cut for 200mm printer beds)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  \u003cspan style=\"font-family: Calibri, serif;\"\u003e\u003cspan style=\"font-size: small;\"\u003eSTL (uncut for larger printers)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  \u003cspan style=\"font-family: Calibri, serif;\"\u003e\u003cspan style=\"font-size: small;\"\u003eAssembled OBJ file (for easy scaling)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp align=\"left\"\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan\u003e\u003cbr\u003eAll cut parts are placed on the print bed just as we would print them, saving you time.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp align=\"left\"\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cb\u003eWidth\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003e162 \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003emm\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp align=\"left\"\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cb\u003eLength\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003e 162\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003emm\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp align=\"left\"\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cb\u003eHeight\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003e 190\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan style=\"font-size: small;\"\u003emm\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  \u003cspan style=\"font-family: Calibri, serif;\"\u003e\u003cspan style=\"font-size: small;\"\u003eLayer height: 0.15 mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  \u003cspan style=\"font-family: Calibri, serif;\"\u003e\u003cspan style=\"font-size: small;\"\u003eInfill: 10% gyroid pattern\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  \u003cspan style=\"font-family: Calibri, serif;\"\u003e\u003cspan style=\"font-size: small;\"\u003eSupports: 30° organic\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  \u003cspan style=\"font-family: Calibri, serif;\"\u003e\u003cspan style=\"font-size: small;\"\u003eFor taller parts, use a brim for better bed adhesion\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp align=\"left\"\u003e  \u003cspan style=\"font-size: small;\"\u003e\u003cspan\u003eSettings may vary depending on your printer, so treat these as a starting point.\u003cbr\u003e\u003cbr\u003eNo 3D printer? No problem! Search for your local 3D printing services.\u003cbr\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003eThis fan-made model was brought to life by \u003cb\u003e3Demon\u003c\/b\u003e, a team of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been creating 3D printable models for over a decade, from cosplay accessories to all sorts of interesting designs.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003cspan style=\"font-family: Calibri, serif;\"\u003e\u003cspan style=\"font-size: small;\"\u003eCheck out more of our creations or join our community \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703853859196,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Seahorse_Beast_color_4_3Demon.jpg?v=1762420302"},{"product_id":"tanooki-mario-printable-figure","title":"Tanooki Mario","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eTanooki Mario is a form of Mario that first appeared in the game Super Mario Bros. 3. This form's name comes from the tanuki, an animal found in Japan and often depicted in folklore.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eFiles contain pieces of the figure ready to be 3D printed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eAt 100% scale Mario is 94 mm tall.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eFor the photos we have used a green base. You can use any base you like. The Model needs a base to stand up. If you don’t have one laying around you can use this model: https:\/\/cults3d.com\/es\/modelo-3d\/juegos\/display-area-building-blocks\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eWe recommend a layer height of 0.2 mm on FDM printers. Model is aligned to the printing platform for easy manipulation. Printing settings will vary greatly depending on your specific printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703854023036,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/PXL_20220623_121838194-1_59b49b5f-d185-4f73-9331-eb52bc879cee.jpg?v=1756928837"},{"product_id":"female-ecorche-for-printing-realistic","title":"Female ecorche","description":"\u003cp data-end=\"45\" data-start=\"0\"\u003eDigital 3D printable model of a \u003cstrong\u003efemale body \u003c\/strong\u003e- an \u003cstrong\u003ee\u003c\/strong\u003e\u003cstrong data-end=\"44\" data-start=\"33\"\u003ecorche figure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-is-only-node=\"\" data-is-last-node=\"\" data-end=\"269\" data-start=\"47\"\u003eAn \u003cstrong data-end=\"61\" data-start=\"50\"\u003eécorché\u003c\/strong\u003e is a figure shown without skin, revealing the underlying muscles and skeletal structure. It is commonly used in figure drawing, anatomy studies, and sculpture to better understand human form and musculature.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis product is a digital STL file. You can scale the model to your desired size in your slicer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e Layer height: 0.15 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e Infill: 20% gyroid pattern\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e Supports: 30° organic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703855366524,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Female_ecorche_2_3Demon_631ac199-f2dd-47ba-8fa0-4b90697a6d75.jpg?v=1756928881"},{"product_id":"assassin-droid-ig","title":"Assassin droid IG-11 - Mandalorian","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eAssassin droid IG-11 - Mandalorian Star Wars \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003efully movable figurine assassin droid IG-11 character from Mandalorian. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/TXs4g98PXKw\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis model is \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003ea \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efully movable figure\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eFiles contain \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003epieces of the droid ready to be 3D printed and assembled plus complete droid files, that are not cut into smaller pieces.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eAt 100% scale the \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003edroid's\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e dimensions are:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eWidth approx. \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e80 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eLength approx. \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eHeight approx. \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e305 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eYou can scale the model as you like\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eWe recommend a layer height \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eof 0.05\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e to \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e0.2\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Quite a lot of the files need printing supports.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e Printing settings will vary greatly depending on your specific printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eIf you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com\/preorder\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703855923580,"sku":null,"price":18.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/03-Droid-main_render.57_d05c6385-6b62-4035-a049-8a4e5ca2ec28.jpg?v=1756928904"},{"product_id":"sabine-wren-printable-figure-season4","title":"Sabine Wren Figure","description":"\u003cp\u003eThis product is a digital 3D model of Sabine Wren ready to be 3D printed not a physical product.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the figure ready to be 3D printed and complete figure files that are not cut into smaller pieces.\u003cbr\u003e\nCollection also includes two types of base and heads. You can print a figure with a helmet or without so you can see the face of Sabine Wren.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ehttps:\/\/www.youtube.com\/watch?v=S0VZpgyC5kA\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eThe figure is at 1\/6 scale\u003c\/p\u003e\n\u003cp\u003eAt 100% scale the figure’s dimensions are:\u003cbr\u003e\nWidth approx. 333 mm\u003cbr\u003e\nHeight approx. 324 mm\u003cbr\u003e\nThe diameter of the round base is 270 mm\u003c\/p\u003e\n\u003cp\u003eYou can scale the model as you like.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eWe recommend a layer height of 0.1 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the model shell parts, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eIf you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com\/preorder\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703914742140,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Sabine-Wren-figure-render_color-main_97391ce8-380a-4c52-9221-36437700bd81.jpg?v=1756930971"},{"product_id":"tommy-angelo-figure-from-mafia-game","title":"Tommy Angelo Statue - Mafia","description":"\u003cp\u003eThis product is a digital 3D model of Tommy Angelo from the iconic game, Mafia: Definitive Edition, ready to be 3D printed. This is not a physical product.\u003c\/p\u003e\n\u003cp\u003eFiles include both complete figures and versions that are cut into smaller pieces, all ready to be 3D printed.\u003c\/p\u003e\n\u003cp\u003eThe model is meant to be post-processed after printing. This can be sanding, gluing, painting,…\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale, the figure’s dimensions are:\u003c\/p\u003e\n\u003cp\u003eWidth approx. 160 mm\u003c\/p\u003e\n\u003cp\u003eHeight approx. 346 mm\u003c\/p\u003e\n\u003cp\u003eThe diameter of the round base is 220 mm\u003c\/p\u003e\n\u003cp\u003eYou can scale the model as you like.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eWe recommend a layer height of 0.1 to 0.2 mm on FDM printers. We are recommended print this model on SLA printer for better final result. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the model shell parts, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eIf you’d like to suggest what we should do next, check out our\u003ca href=\"https:\/\/3d-mon.com\/preorder\"\u003e pre-order page\u003c\/a\u003e and fill in your suggestion\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703971398012,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Tommy_Angelo_color_1_3Demon-1_96395e54-63b6-418a-94f3-718c159b9dee.jpg?v=1756932174"},{"product_id":"andrej-babis-bust","title":"Andrej Babis Bust","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eA bust of Czech Prime Minister Andrej Babiš.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis model is a model of a bust.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFiles contain not cut bust of a person and additional glasses\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale the bust dimensions are:\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWidth approx. 78 mm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLength approx. 59 mm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHeight approx. 150 mm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model according to your needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAs the model is quite small, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the model. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIf you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com\/preorder\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703971594620,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/babis_busta_icon_cd1e0d51-1a4c-427b-bfaa-66b3bb956437.jpg?v=1756932179"},{"product_id":"hrabis","title":"Hrabiš","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis 3D model is a caricature of Czech Prime Minister Andrej Babiš.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis model is a figure. Model f\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eiles contain figure in one piece and optional glasses\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale the bust dimensions are:\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWidth approx. 89 mm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLength approx. 59 mm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHeight approx. 83 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model according to your needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAs the model is quite small, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the model. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIf you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com\/preorder\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"highlighter--hover-tools\"\u003e\n\u003cdiv id=\"highlighter--hover-tools--container\"\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-copy\" title=\"Copy\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-change-color\" title=\"Change Color\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--separator\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"highlighter--icon highlighter--icon-delete\" title=\"Delete\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703971823996,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Hrabis-main1_c01f084a-7c53-4ff4-83c8-c1f91e92f493.png?v=1756932185"},{"product_id":"tommy-angelo-diorama-with-morello","title":"Tommy Angelo Diorama - Mafia","description":"\u003cp\u003eThis product is a digital 3D model of Tommy Angelo with Sergio Morello from the iconic game, Mafia: Definitive Edition ready to be 3D printed. This is not a physical product.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the figure ready to be 3D printed and complete figure files that are not cut into smaller pieces.\u003c\/p\u003e\n\u003cp\u003eThe model is meant to be post-processed after printing. This can be sanding, glueing, painting,…\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale the figure’s dimensions are:\u003c\/p\u003e\n\u003cp\u003eWidth approx. 423 mm\u003c\/p\u003e\n\u003cp\u003eHeight approx. 318 mm\u003c\/p\u003e\n\u003cp\u003eThe diameter of the round base is 423 mm\u003c\/p\u003e\n\u003cp\u003eYou can scale the model as you like.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eWe recommend a layer height of 0.1 to 0.2 mm on FDM printers. We recommended printing this model on an SLA printer for a better final result. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the model shell parts, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eIf you’d like to suggest what we should do next, check out our\u003ca href=\"https:\/\/3d-mon.com\/preorder\"\u003e pre-order page\u003c\/a\u003e and fill in your suggestion\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703972053372,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Tommy_Angelo_Diorama_color_1_3Demon_7d39cf62-9ce5-41a5-bf43-4de3adcf7392.jpg?v=1756932188"},{"product_id":"hydra-3demonster","title":"Hydra 3Demonster","description":"\u003cp\u003eHydra\u003c\/p\u003e\n\u003cp\u003eThis is a digital 3D printable model of a Hydra miniature for tabletop games.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003e  The mini comes in two versions. One pre-supported and one without supports. In both cases, the mini is separate from the base.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale, the model is scaled to work with DnD 5e. The largest part’s dimensions are:\u003cbr\u003e\n\u003cb\u003eWidth\u003c\/b\u003e approx. 70 mm\u003cbr\u003e\n\u003cb\u003eLength\u003c\/b\u003e approx. 74 mm\u003cbr\u003e\n\u003cb\u003eHeight\u003c\/b\u003e approx. 95 mm\u003cbr\u003e\nYou can scale the model as you wish.\u003c\/p\u003e\n\u003cp\u003eWe recommend printing these on an SLA printer. It can be printed on an FDM printer with a small nozzle at 100% but you will lose a lot of detail and the finish will not be as good by far.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt was modelled based on the diary entries of Giles Grafton. Here is one of the entries concerning this model:\u003c\/p\u003e\n\u003cp\u003eThe many-faced god\u003c\/p\u003e\n\u003cp\u003eI met Father Francisco shortly after I arrived in Egypt. At first, we were both travelling with a group of merchants from Cairo, but after a few days, we decided to abandon the trade routes and venture into the unexplored and exciting corners of this strange land just by ourselves. My reasons were obviously scientific – I have heard and read many fascinating stories about the creatures still living along the shores of the Nile and I yearned to see them with my own eyes. Father Francisco, on the other hand, was more interested in meeting the people of this land. He was a man of faith and thought it his mission in life to bring the Gospel to the unfortunate souls that have not yet been given the chance to let the light of Christ into their hearts. Despite that, we got along quite well, Father Francisco was a smart and educated man and a good companion. And after another few days, he got a chance to fulfil his dream.\u003c\/p\u003e\n\u003cp\u003eWe reached a small village that seemed, at least at first sight, almost completely untouched by Christian (or, indeed, by any) civilisation. The villagers were cautious and mistrustful of us at first, but they didn’t seem to pose any real danger. I did not understand their language, but Father Francisco, who spoke many languages, was able to communicate with some of the people from the village who, as he explained to me later, occasionally traded with Egyptian merchants. After Father Francisco explained that we mean them no harm and that we (well, he) came to tell them about God, they became friendlier and invited us to share a meal with them. I could not participate in the conversation, of course, but later at night (that we spent in one of the huts that these good people allowed us to use) Father Francisco explained that our hosts indeed aren’t Christians – they worship a deity they call “The many-faced god”. When he told them about Jesus Christ, they asked him to bring this holy man to sit with them. Father Francisco told them that they cannot meet him in person, which, as he told me, confused them greatly. They thought it silly to worship a god that you cannot see and explained that they regularly visit the lake that “The many-faced god” lives in to bring him sacrifices and to receive his blessing in return. There was going to be another sacrifice the very next day and we were both invited to watch. I could see that Father Francisco was quite irritated and overall nervous about that whole affair, which was understandable, but I told him not to worry about it too much. I have already had my own theory about the god of these people.\u003c\/p\u003e\n\u003cp\u003eThe villagers woke us at daybreak. They showed us the sacrifices they have prepared for their god – it consisted entirely of food, mostly various types of meat – and then asked us to accompany them to the lake that, according to their legends, connects the realm of gods with the realm of men. When we have reached the lake (which was actually quite ordinary), the villagers put the sacrifice on the big rock covered with strange symbols. Then they all knelt and waited in silence, while I and Father Francisco watched from a distance. Soon, waves appeared on the, until now, calm surface of the water and shortly after that a giant lizard head emerged from it. And then another one. And another. One by one, six heads on long, scaly necks appeared – all belonging to one body. I couldn’t tell whether Father Francisco was terrified or fascinated, but he could not take his eyes off this – indeed many faced – god. And nor could I. The creature looked shortly at the crowd gathered before its twelve eyes and then swiftly devoured the sacrifice. After that, it slowly returned to the water. When their god was gone, the villagers started to laugh and cheer. Apparently, this was how the ritual was supposed to go – the sacrifice was accepted, the village received god’s blessing.\u003c\/p\u003e\n\u003cp\u003eOn our way back to the village I assured Father Francisco that what we witnessed wasn’t a god. It wasn’t a demon either. This creature was a hydra, member of a species that in the ancient times lived even in southern regions of Europe. I was determined to stay in the village for some time to study that amazing creature, but regrettably, Father Francisco decided not to stay with me. He thanked the villagers for their hospitality but left almost immediately. I would not dare to question this man’s faith, but I suppose he realized that in the eyes of these people, Jesus Christ stood a little chance against the twenty feet tall, six-headed lizard god with claws as long as swords and scales as hard as steel. I do not blame him. I do not blame him at all.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704526651772,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/hydra-gif_66d05c7c-f4b4-4366-8f0d-8c7fe3d9b467.gif?v=1756967611"},{"product_id":"manticore-3demonster","title":"Manticore 3Demonster","description":"\u003cp\u003eManticore\u003c\/p\u003e\n\u003cp\u003eThis is a digital 3D printable model of a Manticore miniature for tabletop games.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eThe mini comes in two versions. One pre-supported and one without supports. In both cases, the mini is separate from the base.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale, the model is scaled to work with DnD 5e. The largest part’s dimensions are:\u003cbr\u003e\n\u003cb\u003eWidth\u003c\/b\u003e approx. 36 mm\u003cbr\u003e\n\u003cb\u003eLength\u003c\/b\u003e approx. 74 mm\u003cbr\u003e\n\u003cb\u003eHeight\u003c\/b\u003e approx. 45 mm\u003cbr\u003e\nYou can scale the model as you wish.\u003c\/p\u003e\n\u003cp\u003eWe recommend printing these on an SLA printer. It can be printed on an FDM printer with a small nozzle at 100% but you will lose a lot of detail and the finish will not be as good by far.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eIt was modelled based on the diary entries of Giles Grafton. Here is one of the entries concerning this model:\u003c\/p\u003e\n\u003cp\u003eHe had a pet manticore! Even now as I am writing these lines I cannot control my excitement – and I am compromising my usual writing style, disclosing the details about the creature that is the hero of this chapter in the very first sentence, but OH MY GOD HE HAD A PET MANTICORE!\u003c\/p\u003e\n\u003cp\u003eVery well, allow me to start again. Baron Cesare Contarini was without a doubt one of the richest and most influential noblemen I have ever met (though to be fair – I haven’t met many noblemen in my life), so you can imagine my surprise when I received an invitation to meet him at his palace. Baron met me in a small but opulent salon, and we shared a bottle of wine that was probably awfully expensive and definitely wasted on me since I know next to nothing about good wines. But it wasn’t my knowledge of wines that baron was interested in – it was my knowledge of rare and mysterious creatures. Baron explained to me that it is a good habit nowadays amongst his fellow noblemen to sponsor extraordinarily talented artists – painters, poets, composers and such. Yet, he himself isn’t much of a fan of such arts. He cares more about the beauty of dangerous animals and wishes to be a patron to scientists and adventurers dedicated to studying these fascinating beasts. Long story short – he offered me a huge amount of money to basically keep doing what I have already been doing anyway.\u003c\/p\u003e\n\u003cp\u003eBut that wasn’t even the best part! When we drank all the wine, baron asked me to join him for a walk in his garden. There, he showed me cages with all kinds of exotic pets he owned – tigers, lions, hyenas and finally – a manticore. Even though it was a very young female, the manticore was bigger than any other predator in baron’s collection. Spikes on her back and tail were already quite sharp and I knew that as she will grow older, they will only get more and more dangerous. Yet, when baron entered her cage, she seemed relaxed and even allowed him to pet her. Of course, I could not get close to her myself – baron told me it took him over a year to earn her trust – but it didn’t matter. This was a once in a lifetime opportunity to see a manticore up close and not get, well, eaten by it. I made several sketches and asked baron a ton of questions. Luckily enough, he was quite pleased to have somebody to talk to about his favourite pet (I imagine other noblemen preferred to talk about art these days) and politely asked me to leave only after about two or three hours.\u003c\/p\u003e\n\u003cp\u003eAnd sure – I generally don’t approve of keeping animals in cages, but baron really cared about his pets and took great care of them. Also, he gave me a lot of money, so I can’t really criticise him here, can I?\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704526684540,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/manticore-gif_5d83e45c-4105-4e48-8eaf-53b41f524bf7.gif?v=1756967615"},{"product_id":"giant-3demonster","title":"Giant 3Demonster","description":"\u003cp\u003eGiant\u003c\/p\u003e\n\u003cp\u003eThis is a digital 3D printable model of a Giant miniature for tabletop games.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eThe mini comes in two versions. One pre-supported and one without supports. In both cases, the mini is separate from the base.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale, the model is scaled to work with DnD 5e. The largest part’s dimensions are:\u003cbr\u003e\n\u003cb\u003eWidth\u003c\/b\u003e approx. 43 mm\u003cbr\u003e\n\u003cb\u003eLength\u003c\/b\u003e approx. 50 mm\u003cbr\u003e\n\u003cb\u003eHeight\u003c\/b\u003e approx. 58 mm\u003cbr\u003e\nYou can scale the model as you wish.\u003c\/p\u003e\n\u003cp\u003eWe recommend printing these on an SLA printer. It can be printed on an FDM printer with a small nozzle at 100% but you will lose a lot of detail and the finish will not be as good by far.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eIt was modelled based on the diary entries of Giles Grafton. Here is one of the entries concerning this model:\u003c\/p\u003e\n\u003cp\u003eDistinctive features\u003c\/p\u003e\n\u003cp\u003eI was quite sceptical when I first learned about the bog giant of the Bremendorf village from a pilgrim I met one evening in the Broken heart tavern. Bog giants are rather rare creatures and can be easily confused with much more common swamp ogres. Sure, there are some obvious differences between the two: bog giants are bigger, with long arms and long tusks, and the colour of their skin (while most of the time covered in mud) is brown with red spots and ginger hair. Swamp ogres, on the other hand, are green and generally more human-like. Yet, people usually don’t pay enough attention to these distinctive features while running away from monsters they encounter in the middle of the swamp – hence the confusions. But as I talked to the villagers, I have started to believe that it might just be a bog giant living in local marshlands after all, because while none of the villagers who allegedly met the monster could give me a proper description, they have all survived. That could hardly be the case if the monster was a much more aggressive and dangerous swamp ogre.\u003c\/p\u003e\n\u003cp\u003eOf course, I had to see the creature with my own eyes. Even though the marshlands covered a rather large area, I was quite sure I could find the giant (or whatever it was) easily. I mean – how could one miss something that was (according to the stories of the villagers) bigger than a small house? After a few hours of wandering through the bog, I have realized how mistaken I was. Even though there was almost no place to hide – with the exception of an occasional tree or a bigger rock, the swamp was only covered with small bushes, plants and surprisingly big and colourful mushrooms – there were no signs of the giant anywhere. When the night began to fall, I sat on one of the bigger boulders in the middle of the swamp and tried to come up with some new way to find a creature that was, as it seemed, extraordinarily good at hiding in this environment. And then the boulder beneath me moved.\u003c\/p\u003e\n\u003cp\u003eI am a bit ashamed to admit that it frightened me so much I ran screaming right back to the village – but at least I managed to look back and recognize some distinctive features of the creature that I mistook for a boulder and that scared the living daylight out of me. It had huge tusks, long arms covered with ginger hair and big red spots on its back. It was at least twelve feet tall when it fully emerged from the mud, and it was, without any doubts, a bog giant.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704526750076,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/giant-3Demonster_55e3808c-5325-42e6-ae74-717212f2e59a.gif?v=1756967623"},{"product_id":"basilisk-3demonster","title":"Basilisk 3Demonster","description":"\u003cp\u003eBasilisk\u003c\/p\u003e\n\u003cp\u003eThis is a digital 3D printable model of a Basilisk miniature for tabletop games.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eThe mini comes in two versions. One pre-supported and one without supports. In both cases, the mini is separate from the base.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale, the model is scaled to work with DnD 5e. The largest part’s dimensions are:\u003cbr\u003e\n\u003cb\u003eWidth\u003c\/b\u003e approx. 34 mm\u003cbr\u003e\n\u003cb\u003eLength\u003c\/b\u003e approx. 68 mm\u003cbr\u003e\n\u003cb\u003eHeight\u003c\/b\u003e approx. 46 mm\u003cbr\u003e\nYou can scale the model as you wish.\u003c\/p\u003e\n\u003cp\u003eWe recommend printing these on an SLA printer. It can be printed on an FDM printer with a small nozzle at 100% but you will lose a lot of detail and the finish will not be as good by far.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eIt was modelled based on the diary entries of Giles Grafton. Here is one of the entries concerning this model:\u003c\/p\u003e\n\u003cp\u003eTrophy hunt\u003c\/p\u003e\n\u003cp\u003eI have originally come to the Terragona marketplace just to replenish my food supplies and to buy some new equipment for a journey to Africa (yes, that’s how I decided to use the money I got from baron Contarini!), but as I was browsing through all the peculiar stands and stalls with merchandise from all around the world, I noticed a big tent surrounded by an aura of mystery and also a sizeable crowd of people. The sign in front of the tent read: “Monsters of the wilderness” – needless to say, it immediately caught my attention.\u003c\/p\u003e\n\u003cp\u003eAfter waiting in a line for a while (and paying a few coins as an entrance fee) I managed to get inside this odd tent, which, as it turned out, was filled with dead bodies of various animals. Some of them were mounted as wall trophies, others were stuffed or preserved in big jars. There were more than a dozen of them, but to my disappointment, most of those unfortunate creatures were actually pretty common beasts: there was a brown bear, a very old looking lion, a huge snake of some sort, all beautiful and dangerous animals, but no “monsters”. But then I saw it – in the very middle of the tent, hidden behind other exhibits and several curious onlookers, there stood a majestic, reptile-like creature with sharp teeth and tail covered in bright blue-coloured feathers. I forgot to breathe for a few moments – I was staring into the face of a basilisk.\u003c\/p\u003e\n\u003cp\u003eThe man who was collecting the entrance fee and who was apparently the owner of this peculiar tent, as well as the collection within it, must have noticed my sudden surprise since he approached me and with a smile on his face congratulated me on my “cultivated taste”, as he put it. He really seemed more like an artist presenting his work than a scientist studying a fascinating species (which is how I felt), but he was nonetheless very enthusiastic. I asked him where he got such a rare specimen, to which he answered that he simply bought it from a merchant from Africa. This merchant, as he told me, was running through Spain to Europe exactly because of this particular basilisk. Apparently, it was killed by a group of poachers who made their living by hunting big and valuable prey. One day, they somehow managed to kill a basilisk – and they immediately sold its corpse to the first vendor they found. It seemed like a great deal for both parties at first – but of course, there was a catch. The catch, in this case, was the fact that this almost seven feet long basilisk turned out to be just a baby. And when it disappeared, its mother came looking for her child. None of the hunters survived. The unfortunate merchant ran all the way to Europe so the mother would not find him, and he sold the corpse of her baby to the first person who was willing to buy it. I asked the man whether he wasn’t worried that the mother would track her child down, but he just laughed and explained that the basilisk was stuffed and surrounded by hundreds of different people every day – any scent his mother could follow was now long gone. I thanked him for sharing his story and made a few sketches of the creature before I left. For a while, I was thinking about stealing a feather from the basilisk’s tail, but then I decided not to. After all, I was on my way to Africa and when I thought about it – the smile on the owner’s face when he was explaining how the mother can’t ever find her child did not actually seem all that confident.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704526848380,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/basilisk-3Demonster_619d5087-da8c-4f23-97aa-35539cebd269.gif?v=1756967627"},{"product_id":"3demosters-miniatures","title":"3Demosters Miniatures","description":"\u003cp\u003eThe mini comes in two versions. One pre-supported and one without supports. In both cases, the mini is separate from the base.\u003c\/p\u003e\n\u003cp\u003eWe recommend printing these on an SLA printer. It can be printed on an FDM printer with a small nozzle at 100% but you will lose a lot of detail and the finish will not be as good by far.\u003cbr\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eThese 3D printable miniatures were part of our Kickstarter campaign.\u003c\/p\u003e\n\u003cp\u003eThe surprise egg is free to download as a sample of our work. The intention is to have the players throw a D20 and have the dice decide what hatches from the egg.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly detailed model of a Miniature\u003cbr\u003e3D Model fully ready for SLA and SLS 3D printing\u003c\/li\u003e\n\u003cli\u003eData ready for 3D printing:\n\u003cul\u003e\n\u003cli\u003eparts without supports\u003c\/li\u003e\n\u003cli\u003eparts pre-supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou can watch a video about the story of Giles Grafton who documented these beasts bellow.\u003c\/p\u003e\n\u003cdiv class=\"embed-responsive  embed-responsive-16by9\"\u003e\u003ciframe loading=\"lazy\" title=\"3Demonsters Kickstarter campaign ( DnD beasts )\" width=\"1140\" height=\"641\" src=\"https:\/\/www.youtube.com\/embed\/my83RdxuVP8?feature=oembed\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDo you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThese models were brought to life by 3Demon. We are a group of modelling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for over 10 years. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models.\u003c\/p\u003e\n\u003cp\u003eAt the core of 3Demon we have Adam, Filip and Lucky who were involved in all kinds of aspects of this campaign in addition to their main roles in this Kickstarter campaign.\u003c\/p\u003e\n\u003cp\u003eHere is a full list of people who worked on this project:\u003c\/p\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" decoding=\"async\" class=\"alignnone wp-image-58598\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2021\/05\/118dfa83dcfdd50806d2efe4488b8b17_original-248x300.png\" alt=\"\" width=\"435\" height=\"526\" srcset=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2021\/05\/118dfa83dcfdd50806d2efe4488b8b17_original-248x300.png 248w, https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2021\/05\/118dfa83dcfdd50806d2efe4488b8b17_original.png 680w\" sizes=\"auto, (max-width: 435px) 100vw, 435px\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eFilip Foltman\u003c\/span\u003e – Creative Direction\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eAdam Jech\u003c\/span\u003e– Campaign Manager\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eLucky\u003c\/span\u003e – 3D printing\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eRoland Rawen Havran\u003c\/span\u003e – Concept Art  –  \u003ca href=\"https:\/\/instagram.com\/rawen616\" rel=\"noopener\" target=\"_blank\"\u003einstagram\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eJosé Luis Hernández\u003c\/span\u003e – Manticore, Basilisk, Vampire \u003ca href=\"https:\/\/www.instagram.com\/jose_lh_3dart\/\" rel=\"noopener\" target=\"_blank\"\u003einstagram\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eAdus Beránek\u003c\/span\u003e – Eggs\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003ePouriya Afshar\u003c\/span\u003e – Hydra – \u003ca href=\"https:\/\/instagram.com\/paf3d\" rel=\"noopener\" target=\"_blank\"\u003einstagram\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eJulio Carrillo\u003c\/span\u003e – Giant – \u003ca href=\"https:\/\/www.instagram.com\/horus_3dart\/\" rel=\"noopener\" target=\"_blank\"\u003einstagram\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eŠtěpánka Jislová\u003c\/span\u003e – Video Illustration – \u003ca href=\"https:\/\/instagram.com\/jislovka\" rel=\"noopener\" target=\"_blank\"\u003einstagram\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eEli Foltmanová\u003c\/span\u003e – Video Animation\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eAdam Raška\u003c\/span\u003e – Video Script\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eTom Bennett\u003c\/span\u003e – Voiceover\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eAnna Pinskaya\u003c\/span\u003e – Original Score – \u003ca href=\"http:\/\/annapinskaya.com\/\" rel=\"noopener\" target=\"_blank\"\u003ewebsite\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eMichal Kocourek\u003c\/span\u003e – Additional Illustrations – \u003ca href=\"https:\/\/instagram.com\/_yeronym_\" rel=\"noopener\" target=\"_blank\"\u003einstagram\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eDavid Kocourek\u003c\/span\u003e – Diary Entries\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"bold\"\u003eLukas Kačer\u003c\/span\u003e – Brush master\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease support our campaign to bring these beasts back to life.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDo you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis \u003c\/span\u003e\u003cspan\u003efan-made\u003c\/span\u003e\u003cspan\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704526881148,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/3Demonsters-thumbnail-13ku10_22094c8a-3f02-4b72-8677-6d25a5dcdd3f.jpg?v=1756967629"},{"product_id":"xi-jinpooh","title":"Xi Jinpooh","description":"\u003cp\u003eXi Jinpooh\u003c\/p\u003e\n\u003cp\u003eThis 3D model is a caricature of the Chinese President, Xi Jinping, enjoying his favourite thing.\u003c\/p\u003e\n\u003cp\u003eIf you want to sell physical prints of this object or you simply want to support us there is a commercial version available \u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/xi-jinpooh-sell\/\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe model is scaled to be 10 cm tall but you can scale it however you wish.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eThe download files contain a version that can be printed without supports on FDM printers and also a version that has oppression dripping from his hand that requires supports. But supports would make some parts of the prints nicer and safer to print (hands, face).\u003c\/p\u003e\n\u003cp\u003eWe use these settings for most of our prints:\u003cbr\u003e\nLayer height 0.2 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45°\u003c\/p\u003e\n\u003cp\u003eThe version in the photos was printed from Fillamentum PLA Traffic Yellow.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704527208828,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/gif-printed-xi-jinpooh-web_096a48e0-18ba-4e2f-b8b7-28e2b9443f73.gif?v=1756967659"},{"product_id":"pokemon-card-stands","title":"Pokemon Card Stands","description":"\u003cp\u003eThese models were designed to display Pokémon cards. The card in the stand is tilted back slightly and the area in front of the card is meant for displaying a 3D representation of the Pokemon. It is not directly in front of the card to not obstruct view of it. You can have a look at our \u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/pokemon\/\"\u003eLow Poly Pokémon collection\u003c\/a\u003e if you’d like some models to with it.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/pokemon\/\"\u003e\u003cimg class=\"alignnone wp-image-37710\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2020\/06\/pokemon-low-poly119-300x200.png\" alt=\"\" width=\"525\" height=\"350\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe black layers on the top which help separate the Pokémon with contrast are done using a color change in the slicer as described below.\u003c\/p\u003e\n\u003cp\u003eThe stands have Pokémon energy types stamped into them but there is also a blank version that doesn’t have any symbol on it. Energy types: Fire, Water, Lightning, Fighting, Psychic, Colorless, Darkness, Metal, Dragon and Fairy\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eThere are two size versions of holes for the cards. One for 3\" X 4\" Toploaders and the other is for PSA cases which are bigger.\u003cbr\u003e\nAt 100% scale the model’s dimensions are approximately:\u003cbr\u003e\nWidth 206 mm\u003cbr\u003e\nLength 102 mm\u003cbr\u003e\nHeight 8 mm\u003cbr\u003e\nCan be turned diagonally to fit 170 mm print beds.\u003c\/p\u003e\n\u003cp\u003e3D printing settings we used:\u003cbr\u003e\nLayer height 0.2 mm\u003cbr\u003e\nNo Supports\u003cbr\u003e\n0 bottom layers\u003cbr\u003e\nInfill 9% Triangles (because of the low infill we set a single solid layer to print on the layer where the type symbol starts printing because it wasn’t bridging it well enough.\u003c\/p\u003e\n\u003cp\u003eColor change:\u003cbr\u003e\nTo change the color for the top black layers you can use Prusa Slicers color change function or you can open any g-code in a text editor and add the code M 600 before the layer where you want the change to occur. Top 2 layers should be black to ensure even coverage.\u003c\/p\u003e\n\u003cp\u003eIf you want the top solid infill to be aligned with the edges then set it to a 46.6° angle.\u003c\/p\u003e\n\u003cp\u003eIf you have a spotless printing surface you might want to print the stand upside down and have a glossy finish (the type symbol will bridge easily without supports).\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eThe single color stands were printed with Fillamentum PLA and the rainbow version was printed with Sunlu Rainbow Silk PLA.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by Filip from 3Demon. \u003cspan style=\"font-weight: 400\"\u003eWe are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704544117116,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/pokemon-card-stand-3Demon_e3964315-8e0d-4a56-8c70-e76b51c1384d.gif?v=1756968187"},{"product_id":"dwarf-commando","title":"Dwarf Commando - D\u0026D Set","description":"\u003cp\u003eDwarf Commando\u003c\/p\u003e\n\u003cp\u003eThis is a digital 3D printable model of Dwarf Commando (D\u0026amp;D Set).\u003c\/p\u003e\n\u003cp\u003eThe download contains models ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.\u003c\/p\u003e\n\u003cp\u003eSet contains figures of 10 dwarfs with roles such as: Axeman, Blacksmith, Butcher, Cleric, Hammer man, Mace man, Marksman, Pub man, Sniper and Wizard\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the models’ dimensions are:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e Approx. 25 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e Approx. 25 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e Approx. 29 mm\u003c\/p\u003e\n\u003cp\u003eSize of the each models height can wary with average height being 29 mm.\u003c\/p\u003e\n\u003cp\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe use these settings for most of our prints:\u003cbr\u003e\nLayer height 0.2 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45°\u003cbr\u003e\nFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories, but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704545722748,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/1_a2d9437d-c92a-4a0d-a227-246867caf942.png?v=1756968307"},{"product_id":"todo-360-clone-wars","title":"Todo 360 - Clone Wars","description":"\u003cp\u003eThis is a digital 3D printable model of Todo 360 from Star Wars: The Clone Wars and Star Wars: The Bad Batch.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThe download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eThe total dimensions of this model are approx.:\u003c\/h2\u003e\n\u003cp\u003eWidth: 460 mm\u003cbr\u003e\nLength: 410 mm\u003cbr\u003e\nHeight: 660 mm\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eYou can scale the model as you wish.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eLayer height 0.2 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eSupports 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch\u003e\u003ca href=\"https:\/\/www.instructables.com\/Making-Life-size-Todo-360-Cad-Banes-Droid-Star-War\/\"\u003eInstructables on Todo 360 project!\u003c\/a\u003e\u003c\/h\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003ca href=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2021\/09\/todo-360-3d-print-model.jpg\"\u003e\u003cimg class=\"alignnone wp-image-95163 size-large\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2021\/09\/todo-360-3d-print-model-1024x788.jpg\" alt=\"\" width=\"1024\" height=\"788\"\u003e\u003c\/a\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThis model is meant to be post-processed after printing. This can be glueing, sanding, painting, etc.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704545919356,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/1_top-3demon-v04-10_d3c60f58-e0d3-4ac8-b241-03bab06c3275.jpg?v=1756968316"},{"product_id":"orc-commando-dnd","title":"Orc Commando - D\u0026D Set","description":"\u003cp\u003e\u003cstrong\u003eOrc Commando\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese are a digital 3D printable models of Orc Commando (D\u0026amp;D Set).\u003c\/p\u003e\n\u003cp\u003eThe download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.\u003c\/p\u003e\n\u003cp\u003eSet contains figures of 6 Orcs with roles such as: Bard, Samurai, Gladiator, Shaman, Berserker, Warrior\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the model’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 25 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 25 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 35 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003cbr\u003e\nSize of the each models height can wary with average height being 35 mm.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe recommend printing with SLA printer, but you can print them on FDM printer for which we recommend these settings:\u003cbr\u003e\nWe use these settings for most of our prints:\u003cbr\u003e\nLayer height 0.15 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45°\u003cbr\u003e\nFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704546083196,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/orc-color-group.0_b542e593-c718-49be-8c23-3d4ef3666ef0.png?v=1756968330"},{"product_id":"bb-9e-droid-star-wars","title":"BB-9E Droid - Star Wars","description":"\u003cp\u003e\u003cstrong\u003eBB-9 E Droid Star Wars\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a digital 3D printable model of BB-9 E Droid from Star Wars.\u003c\/p\u003e\n\u003cp\u003eThe download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the model’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 92 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 92 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 122 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe use these settings for most of our prints:\u003cbr\u003e\nLayer height 0.2 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45°\u003cbr\u003e\nFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704547688828,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/BB-9E-Color_main_3D_print_512286df-c21f-4545-833d-6f495bdb12fc.png?v=1756968603"},{"product_id":"bull-statue-dune","title":"Bull Statue - Dune","description":"\u003cp\u003eThis is a digital 3D printable model of a small statue of Paul Atreides‘ grandfather fighting a bull. It was featured in the 2021 movie Dune.\u003c\/p\u003e\n\u003cp\u003eThe download contains pieces of the model ready to be 3D printed on a 200 mm print bed with small pegs for easy assembly and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time. The individual pieces need to be glued together, the muleta should be touching the ground.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou can have a look at more of our Dune models \u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/dune-bundle\/\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/dune-bundle\/\" target=\"_blank\" rel=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/dune-bundle\/ noopener\"\u003e\u003cimg class=\"alignnone wp-image-79138\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2021\/08\/Dune_collection_bundle_3D_print_STL-1024x787.jpg\" alt=\"Dune collection\" width=\"600\" height=\"461\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the model’s total dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 132 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 282 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 130 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe recommend these settings for the print:\u003cbr\u003e\nLayer height 0.1 - 0.15 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45° + extra supports for the old duke’s left hand\u003cbr\u003e\n5 mm brim\u003cbr\u003e\nPrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eYou can simply print the 3D model or you can also post-process it to make it look like the bronze statue in the movie with shiny spots where it gets touched the most.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/mtVH8xH4_RU\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704549785980,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Dune_bull_statu_icon_f0fce145-a4cb-4be9-a4f5-2d921873a2e4.jpg?v=1756968759"},{"product_id":"display-area-building-blocks","title":"Display Area Building Blocks","description":"\u003cp\u003e\u003cstrong\u003eThese are building blocks that you or your kids can use to create all sorts of terrains.\u003c\/strong\u003e There are millions of combinations and each person can create something new.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/M2qKV_lZXe0\u003c\/p\u003e\n\u003cp\u003eYou can create a diorama to display all sorts of figures. Kinder Surprise Figures, My Little Pony or the \u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/pokemon\/\" target=\"_blank\" rel=\"noopener\"\u003elow poly Pokemon\u003c\/a\u003e that we’ve made. No gluing is needed but if you are going to be placing figures on it you might want to use blue tack (adhesive putty) to hold them in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe texture on the surface of the terrain tiles is made by printing only the pattern in the first layer and then filling the surface in the next layer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe grid has the shape of the terrain pieces so you know easily how to place them on it. The shape of the tiles was chosen to go well with a low poly style that blends gradually from surface to surface. The look changes when viewed from different angles.\u003c\/p\u003e\n\u003cp\u003eThe download contains STL files and also 3MF files for Prusa Printers that have slicer settings adjusted the way we recommend printing. All parts are placed on the print bed as we would print them to save you time.\u003c\/p\u003e\n\u003cp\u003eThe terrain textures are:\u003cbr\u003e\n\u003cstrong\u003eGrass\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eWater\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eLava\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eRocky\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eCity\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eDesert\u003c\/strong\u003e – A and B create sand dunes together by making an ABAB pattern\u003cbr\u003e\n\u003cstrong\u003eBlank\u003c\/strong\u003e - can be used as still water or printed any color as a basic terrain tile without a texture that’s easier to print\u003c\/p\u003e\n\u003cp\u003eFeel free to post some makes. We would love to see what you create :-)\u003c\/p\u003e\n\u003cp\u003eYou can read more detailed instructions on how to work with the project \u003ca href=\"https:\/\/www.instructables.com\/3D-Printed-Diorama-Building-Blocks\/\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the models will fit on a 165 mm printer bed.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eSlicer settings are important to print the texture on the terrain tiles correctly and can save you a lot of print time.\u003c\/p\u003e\n\u003cp\u003eThese are the settings that we recommend for the terrain tiles:\u003cbr\u003e\nLayer Height 0.2 mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Supports\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePerimeters (minimum): 1\u003c\/p\u003e\n\u003cp\u003eSwitch to Advanced Mode\u003c\/p\u003e\n\u003cp\u003eExtrusion Width Changes:\u003cbr\u003e\nFor lava and hills on some printers: First Layer: 0.5\u003cbr\u003e\nPerimeters: 0.48 mm\u003cbr\u003e\nExternal Perimeters: 0.48 mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBridge Flow Ration: 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor the other parts like the tree, rocks and grass you can use what settings you like. For the grass, we recommend setting retractions on only for crossing perimeters.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eYou can sell 3D prints of this model if you link to us on the page where you sell them but you cannot sell the digital files.\u003c\/p\u003e\n\u003cp\u003eThis model was brought to life by Filip from 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704575902076,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/icon-display-are-building-blocks_d0914f6d-6902-49ad-84c8-39b894166e8d.jpg?v=1756969482"},{"product_id":"botw-link-mossarium-figure","title":"BOTW Link Mossarium Figure","description":"\u003cp\u003eThis is a digital 3D printable model of the game character Link from The Legend of Zelda: Breath of the Wild. In this pose he is standing on a rock gazing into the distance, admiring the view, ready to dive in.\u003c\/p\u003e\n\u003cp\u003eThe download contains Link in one piece and also cut into 4 separate parts for easier painting, giving access to hard to reach areas. The rock is provided in a hollow version and a full version which is better suited for FDM 3D printers. We’ve also created a 3MF file that is pre-supported with custom supports in Prusa Slicer for SLA printers.\u003c\/p\u003e\n\u003cp\u003eIf you want to create a mossarium like we’ve made you can follow these instructions. https:\/\/www.instructables.com\/The-Legend-of-Zelda-Moss-Terrarium-Using-IKEA-Glas\/\u003cbr\u003e\nMossaria are self-sufficient sealable glass containers with moss growing inside. The main things you need to create this one are a glass dome, moss, soil and the painted figure.\u003c\/p\u003e\n\u003cp\u003eA 3D printable model that is also part of the download is an optional FDM printable inset designed specifically for the narrow IKEA Glass Dome SKONJA. That is meant to have infill only in the first layer and to create a sieve that holds soil but lets water through.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the figure’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 60 mm\u003cstrong\u003e\u003cbr\u003e\nWidth\u003c\/strong\u003e 45 mm\u003c\/p\u003e\n\u003cp\u003eYou can scale the model as you wish.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe recommend printing this figure on an SLA 3D printer to preserve as much of the details as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIf you only have an FDM printer we recommend using these settings:\u003cbr\u003e\nLayer height 0.1 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45°\u003cbr\u003e\nFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704576098684,"sku":null,"price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/gif-link-3Demon-figure-3D-print_2c55a444-369c-4039-9dd1-fba0e2b28e28.gif?v=1756969485"},{"product_id":"torrent-elden-ring","title":"Torrent - Elden Ring","description":"\u003cp\u003e\u003cstrong\u003eTorrent - Elden Ring\u003cbr\u003e\n\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e This is a digital 3D printable model of the horse-like spirit Torrent, the player's most trusted companion from the critically acclaimed video game Elden Ring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e The download contains \u003cstrong\u003etwo models\u003c\/strong\u003e – a jumping Torrent statue and a standing miniature version for your tabletop games. The model is mainly meant to be printed on an SLA printer but will work on an FDM printer to some extent. Files are both in STL. and OBJ. format.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e Please note that the base and the miniature are by default printed separately and must be glued together. The statue version will fall over so we recommend fixing the base to a desk somehow - this can be gluing, using weights or magnets.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp class=\"western\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003eAt 100% scale, the model’s dimensions are approximately:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e \u003c\/span\u003e\u003cem\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003ejumping statue\/ standing miniature\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003eWidth:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e 126,2 \/ 50 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003eLength:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e 65,6 \/ 20,7 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003eHeight:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e 111,4 \/ 45,5 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e You can scale the model as you wish. The details on the Jumping Statue version easily allow for a bigger print, the default size is the maximum size to fit the classical platform of a resin printer in one piece. Also, the miniature is by default fit for 45 mm size as a medium.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"western\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e\u003ca href=\"https:\/\/www.instructables.com\/Elden-Ring-Moss-Terrarium-in-9-Easy-Steps\/\"\u003e\u003cimg class=\"alignnone wp-image-90864 size-full\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2022\/04\/elden-ring-torrent-spirit-steed-3d-print-project.jpg\" alt=\"\" width=\"948\" height=\"394\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe recommend printing with an SLA printer (0,025 mm) but you can print them on an FDM printer for which we recommend these settings:\u003cbr\u003e\nWe use these settings for most of our prints:\u003cbr\u003e\nLayer height 0.1 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45°\u003cbr\u003e\nFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704576229756,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Uvodni-foto_e518ecae-8445-479a-9370-a9a6e39dbfdf.jpg?v=1756969489"},{"product_id":"lechonk-low-poly-pokemon","title":"Lechonk","description":"\u003cp\u003eThis chonky low-poly pokemon prints without supports.\u003c\/p\u003e\n\u003cp\u003eWe’ve also made all first generation pokemon and we’re working on finishing the second. You can have a look at those here:\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/pokemon\/\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/low-poly-pokemon-generation-2\/\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eThis model doesn’t need any supports but a brim is recommended so the back legs and tail don’t fall over before connecting to the body. 0.15 mm layer height is recommended.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou can make the color change easily in prusaslicer. The face and tips of the ears should be brown and the nose should be pink. In prusaslicer go the layer where you want to make the color change and click the plus sign next to the layer slider.\u003c\/p\u003e\n\u003cp\u003eThe size at which you download it is 4% of the real life size of the Pokemon. It is chosen so that if you print the whole collection it won't be too big and even the tiny Pokemon will look good but if you’re going to be making just this one or a couple then print them at whatever size you like.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary depending on your specific printer. The one in the pictures was printed on a Prusa MK3 printer at a 0.2 mm layer height and was scaled to 150%.\u003c\/p\u003e\n\u003cp\u003eThis model was created by Filip from our 3 Demon team. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704592679292,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/lechonk-icon-1_bd63a09d-9d48-4d76-8524-5103e4510d21.jpg?v=1756969736"},{"product_id":"necromancer-apprentice-dnd-figure-darkest-dungeon","title":"Necromancer Apprentice DnD Figure - Darkest Dungeon","description":"\u003cp\u003eThis is a digital 3D printable model of a \u003cstrong\u003eNecromancer Apprentice figure for DnD or other role-playing tabletop games. The boss necromancer figure is inspired by the Darkest Dungeon video game. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe download contains model ready to be 3D printed on SLA printers, or any standard FDM 3D printers. The mage figure is placed on the print bed as we would print it on FDM printer.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the figure’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 32 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 32 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 48 mm\u003cbr\u003e\nYou can scale the model before printing as you wish.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe recommend printing with SLA printer (0,025 mm) but you can print them on FDM printer for which we recommend these settings:\u003cbr\u003e\nLayer height 0.1 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45°\u003cbr\u003e\nFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be covering in spray filler and painting.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https:\/\/3d-mon.com\/links\/\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704594088316,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Necromancer-Apprentice-Darkest-Dungeon-1_987262e4-1d06-4438-8228-60107729478b.jpg?v=1756969775"},{"product_id":"modular-magnetic-dnd-figure-mage","title":"Modular magnetic DnD figure – Mage","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a \u003cstrong\u003edigital 3D printable model\u003c\/strong\u003e of a Mage. Or a king. It’s up to you. The heads, hands, chests, arms, and legs are completely modular and you can switch them as you progress in your character’s story and equip it with different weapons, spells, and accessories.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch2\u003e📦 Included Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e4 x head\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e4 x legs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e1 x base\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e3 x chest\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e6 x arms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eHands wielding different objects\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eAccessories such as a cloak and a backpack\u003cbr\u003e\n\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/M9_UnvHLU1g\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003epieces of the model are ready to be 3D printed on an SLA printer. They are prepared for inserting cylindrical magnets.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eMagnets we use:\u003cbr\u003e\n\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003eDiameter 2 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHeight 0.90 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eSIZE\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale the \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emage’s \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003edimensions are approximately:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eWidth:\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e 35 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eHeight:\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e 40 mm\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eBase diameter: \u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e25 mm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eNeck diameter:\u003c\/strong\u003e 3.10 mm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eLower body diameter:\u003c\/strong\u003e 6.30 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model as you wish. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe recommend printing with \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ean\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e SLA printer (0.025 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e layer height\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e) but you can print it at\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e a\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e larger scale on FDM printer for which we recommend these settings:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eLayer height 0.1 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eInfill 15%\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSupports 45°\u003c\/span\u003e\u003c\/span\u003e For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cstrong\u003eASSEMBLY\u003c\/strong\u003e\u003cb\u003e\u003cbr\u003e\n\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe holes in the models are prepared for inserting magnets \u003c\/span\u003e\u003cb\u003e(2 mm diameter, 0.90 mm high)\u003cbr\u003e\n\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003cb\u003eNeed to cut your own figures? And prepare them for inserting magnets? \u003c\/b\u003e\u003ca href=\"https:\/\/drive.google.com\/file\/d\/1a0n7ZAFGsHyqC0avxPbMW-d1eb8Qwl8C\/view?usp=sharing\"\u003e\u003cb\u003eWe made a manual on that! \u003c\/b\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e(PDF) and also a \u003ca href=\"https:\/\/youtu.be\/A6QtOraIAfQ\"\u003eYoutube Tutorial.\u003c\/a\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\nThis model is meant to be post-processed after printing. This means inserting magnets, and painting.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\nDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\nThis model for \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDungeons and Dragons tabletop gaming \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ewas brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003cbr\u003e\nWe’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models.\u003cbr\u003e\n\u003c\/span\u003e You can join our community or just look at more of our creations here: \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003eSocial media\u003c\/a\u003e\u003c\/p\u003e\n\u003ch\u003e\u003c\/h\u003e\n\u003ch\u003eYou might also need: \u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/condition-markers-for-dnd-figures\/\"\u003eFunny Modular and Simple Practical Condition Markers for DnD!\u003c\/a\u003e\u003c\/h\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/26SKIkng3c8\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTAGS:\u003cbr\u003e\n\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003eDnD, dungeons, dragons, tabletop, figure, miniature, modular, magnetic, movable, mage, hero, spell, staff\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704595923324,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/modular-magnetic-mage-stl-3d-print-dnd_b17ff38a-f247-403c-9a48-98641e2c69ba.jpg?v=1756969816"},{"product_id":"practical-condition-markers-for-dnd-figures","title":"Practical Condition Markers for DnD figures","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese are digital 3D printable models of condition indicators for your Dungeons \u0026amp; Dragons heroes.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe download contains \u003c\/span\u003e\u003cb\u003e14 different status effect markers in STL format\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eEach condition has its original practical base and some have also a ring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/26SKIkng3c8\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis set contains the following condition markers:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eFrightened, Petrified, Exhausted, Paralyzed, Invisibile, Unconscious, Charmed, Deafened, Stunned, Blinded, Incapacitated, Restrained, Grappled, and Poisoned. To show your hero is prone, lay it down on the terrain surface. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eSIZE\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale, the diameter of the pedestal circle is about 30 mm, which fits most D\u0026amp;D figures. Tested on our \u003c\/span\u003e\u003cb\u003e\u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/modular-magnetic-dnd-figure-mage\/\"\u003efree figure of a mage\u003c\/a\u003e. (Mage’s height:\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e40 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm, \u003c\/span\u003e\u003cb\u003eWidth:\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e35 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm, \u003c\/span\u003e\u003cb\u003eBase diameter: \u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e25 mm)\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model as you wish.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe recommend printing with an SLA printer (layer height 0,025 mm)\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe don't sell the physical product. Only the digital files. Do you like them and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThese models were created by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories, Dungeon and Dragons figures, and all sorts of interesting 3D models. You can join our community or just look at more of our creations here: \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003eSocial Media\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTAGS:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003edungeons, dragons, dnd, tabletop, figure, condition, ring, marker, indicator, base, ring, pedestal, effects, stunned, restrained, status, effect\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704596283772,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/cover_dungeons_dnd_conditions_practical_pack_d8794367-6f73-4463-bf11-359c5b958dbe.jpg?v=1756969822"},{"product_id":"condition-markers-for-dnd-figures","title":"Condition Markers for DnD figures","description":"\u003cdiv class=\"embed-responsive  embed-responsive-16by9\"\u003e\u003ciframe loading=\"lazy\" title=\"3D printable Condition Markers for DnD figures by 3Demon\" width=\"1140\" height=\"641\" src=\"https:\/\/www.youtube.com\/embed\/26SKIkng3c8?feature=oembed\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e2 sets of condition markers for DnD figures.\u003cbr\u003eFunny Conditions are modular magnetic parts and Practical Conditions are rings and pedestals for Dungeons and Dragons figures of any sort. Both sets are digital 3D printable files.\u003cbr\u003eYou can read more about each set by clicking through to their individual product pages.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDo you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis \u003c\/span\u003e\u003cspan\u003efan-made\u003c\/span\u003e\u003cspan\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704601264508,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/CONDITIONS-bundle-THUMB_7063f860-9186-40a5-b3ad-dec6b393a363.jpg?v=1756969865"},{"product_id":"astro-bot-ps5-controller-charger","title":"Astro Bot PS5 Controller Charger","description":"\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003eThese little bots are characters from the free PS 5 game Astro’s playroom. In the game, all of the consoles get some love from these adorable robots except for the PS 5 generation of products, so we thought we’d make our own to hug the console and controller and while it's doing it, it might as well charge it :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003eThere is a version that fits the black rectangular end of the cable that comes with a PS 5 console but because I liked it better with a white cable, there are two other versions that fit different, smaller, types of USB-C cables. There is a version that doesn’t have a hole in the chest for a charger if you just want it to cuddle your console or anything else.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e \u003cstrong\u003eThe download contains pieces of the model ready to be 3D printed on a 100 mm print bed\u003c\/strong\u003e and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e At 100% scale the model is 53 mm tall.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out the whole \u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/astros-playroom-astrobot-statues\/\"\u003eAstro’s Playroom Astrobot Statues\u003c\/a\u003e!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2024\/12\/Link_Astro_Playroom_Astrobot_Statues_3Demon.jpg\"\u003e\u003cimg class=\"alignnone wp-image-149972 size-large\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2024\/12\/Link_Astro_Playroom_Astrobot_Statues_3Demon-1024x423.jpg\" alt=\"\" width=\"1024\" height=\"423\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003eThey can be printed on FDM and SLA printers. If you have both I recommend printing the pre-supported SLA version with the face separate.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e We use these settings for most of our FDM prints:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e Layer height 0.15 mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e Infill 15%\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e Supports 45°\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e We use a 10 mm brim for better bed adhesion because the contact surface of the legs is tiny.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e You can paint its eyes for the hearts to pop.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e Printing settings will vary greatly depending on your specific printer.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e These are digital 3D printable models, not finished products. Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cspan style=\"color: #0 e 101 a;\"\u003e This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704606998908,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/astro-bot-charger-stl-3D-print-gif-icon_13e96903-4b80-42b3-aa6a-05b841acdfc9.gif?v=1756969921"},{"product_id":"magnetic-dnd-forest-magic-pack","title":"Magnetic DnD — Forest Magic Pack","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese are digital \u003cstrong\u003e3D printable models of weapons, body parts, and accessories for modular magnetic DnD miniatures.\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe download contains pre-supported files with magnet slots \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eready to be 3D printed on your SLA printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe \u003cstrong\u003eForest Magic Pack\u003c\/strong\u003e includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eweapons (staffs, bow, shield, sword, sickle, rock, spoon...)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003ehand items (lanter, kettle, root, owl, frog, skull, mortar...)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eback accessories (leaf cape, root wings, quiver)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003ea mount (adorable toad, up for name suggestions)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003ea condition (grappled \/ stuck in bushes)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eheads and headgear (bear hat, antlers, toad...) see the render photos!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\nAll hand items are in 2 versions for both right and left hand. All hand items have versions of human hands for average-sized figures, and monster hands for larger characters such as trolls, etc.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe pack includes human and monster heads with headgear. It also includes separate headgear for individual merging with your figure - tested on Hero Forge figures, it worked proportionally very well (3D builder is the ideal program for this, use the “union” function).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale, the parts fit our \u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/modular-magnetic-dnd-figure-mage\/\"\u003efree figure of a mage.\u003c\/a\u003e (Mage’s height: 40 mm, Width: 35 mm, Base diameter: 25 mm) Neck diameter: 3.10 mm Lower body diameter: 6.30 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eIt fits all average-sized miniatures. Tested on Hero Forge figures.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe recommend printing with an SLA printer (0.025 mm layer height) Printing settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eASSEMBLY\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe holes in the models are prepared for inserting magnets (2 mm diameter, 0.90 mm high)\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"width: 1080 px;\" class=\"wp-video\"\u003e\n\u003c!--[if lt IE 9]\u003e\u003cscript\u003edocument. create Element('video');\u003c\/script\u003e\u003c![endif]--\u003e\u003cbr\u003e\n\u003cvideo class=\"wp-video-shortcode\" id=\"video-0-1\" width=\"1080\" height=\"1080\" poster=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2022\/08\/magnetic-modular-dnd-forest-magic-pack-3demon.jpg\" preload=\"metadata\" controls=\"controls\"\u003e\u003csource type=\"video\/mp 4\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2022\/08\/forest-magic-video1x1.mp4?_=1\"\u003e\u003ca href=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2022\/08\/forest-magic-video1x1.mp4\"\u003ehttps:\/\/aws.3d-mon.com\/wp-content\/uploads\/2022\/08\/forest-magic-video1x1.mp4\u003c\/a\u003e\u003c\/video\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere. \u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTAGS:\u003cbr\u003e\n\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003eDnD, hero forge, modular, magnetic, forest, magic, miniature, mage, stl, SLA, figure, statuette, statue, accessories, weapons, dungeons, dragons, dungeons and dragons\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704607523196,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/cover-resin-print-dnd-magnetic-modular-forest-magic-pack_d968b97e-8464-4f3e-b776-b705db8d93ab.jpg?v=1756969930"},{"product_id":"statue-of-the-goddess-of-fortune","title":"Statue of the Goddess of Fortune","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a\u003cstrong\u003e digital 3D printable model of a \u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eStatue of the goddess of fortune\u003c\/strong\u003e.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eFortuna (equivalent to the Greek goddess Tyche) is the goddess of fortune and the personification of luck.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe download contains \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ean OBJ file \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eplaced on the print bed \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eready to be 3D printed (SLA, FDM, SLS)\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale the \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emodel’s \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003edimensions are approximately:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eWidth\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e76 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eLength \u003c\/b\u003e54 \u003cspan style=\"font-weight: 400;\"\u003e mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eHeight\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e154 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model as you wish.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe recommend printing with an SLA printer \u003cstrong\u003e(0,025 mm)\u003c\/strong\u003e but you can print them on an FDM printer for which we recommend these settings:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eLayer height\u003c\/strong\u003e 0.10 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eInfill\u003c\/strong\u003e 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eSupports\u003c\/strong\u003e 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere.\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTAGS: \u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003efortune, Fortuna, tyche, mythology, greek, roman, ancient, statue, statuette, model, woman, figure, goddess, luck\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704609063292,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/fortuna-goddess-of-fortune-statue-3d-print-stl_83a16500-67e7-4179-9965-18f360519142.jpg?v=1756969967"},{"product_id":"goblin-band-dnd-set","title":"Goblin Band - DnD Set","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis is a digital 3D printable model of \u003c\/span\u003e\u003cstrong\u003eGoblin Band set made for tabletop game DnD.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThe download contains \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003emodels ready to be 3D printed on a 200 mm print bed (STL)\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e. All parts are placed on the print bed as we would print them to save you time.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eSIZE\u003c\/b\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eAt 100% scale the \u003cstrong\u003emodel’s\u003c\/strong\u003e dimensions are approximately:\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eWidth\u003c\/b\u003e \u003cspan style=\"font-weight: 400\"\u003e50 \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eLength\u003c\/b\u003e \u003cspan style=\"font-weight: 400\"\u003e50 \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eHeight\u003c\/b\u003e \u003cspan style=\"font-weight: 400\"\u003e50 - 70 \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well. We sculpt our 3D models on our average-sized body template. \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003eRead about the sizing and how to scale the models to fit your body here.\u003cbr\u003e\n\u003c\/a\u003e\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eSupports 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704682398076,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Keyshot-Default-Template.4_ef31b588-2fee-47a1-bcfd-76886c5d9c1c.jpg?v=1756970592"},{"product_id":"c1-10p-chopper-droid-star-wars","title":"C1-10P Chopper Droid - Star Wars","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis is a digital 3D printable model of \u003c\/span\u003e\u003cstrong\u003eC 1-10 P Chopper Droid from the famous franchise Star Wars.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThe download contains \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003epieces of the model ready to be 3D printed on a 200 mm print bed (STL) and \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efiles that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eSIZE\u003c\/b\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eAt 100% scale the model’s dimensions are approximately:\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eWidth\u003c\/b\u003e \u003cspan style=\"font-weight: 400\"\u003e158 \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eLength\u003c\/b\u003e \u003cspan style=\"font-weight: 400\"\u003e70 \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eHeight\u003c\/b\u003e \u003cspan style=\"font-weight: 400\"\u003e140 \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe use these settings for most of our prints:\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eLayer height 0.15 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eInfill 15%\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eSupports 45°\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eWe use hex-pegs (included in the files) that will help you connect the cut pieces of the model. \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704721195388,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/C1_10P.5_d5547696-c445-47c2-99f6-853559000904.jpg?v=1756970685"},{"product_id":"magnetic-dnd-desert-travels-pack","title":"Magnetic DnD — Desert Travels Pack","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese are digital \u003cstrong\u003e3D printable models of weapons, body parts, and accessories for modular magnetic DnD miniatures.\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe download STL files with magnet slots \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eready to be 3D printed on your SLA printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe \u003cstrong\u003eForest Magic Pack\u003c\/strong\u003e includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eweapons (scimitars, daggers, spear, whip, staffs, bows, swords, frying pan...)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003ehand items (Djinn's Lamp, wine bottle, water flask, scroll, shields...)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eback accessories (Bag of Spoils, Sand Elemental Shield, backpack)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eMount - camel, up for name suggestions. 2 Versions - with and without rider's legs.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eMount - Flying Carpet\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003ean enemy figure (grappled \/ stuck in bushes)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003econdition (shifting sands)\u003c\/li\u003e\n\u003cli\u003ecompanion\/enemy - depends on the point of view I guess (Djinn)\u003c\/li\u003e\n\u003cli\u003ecloak and headgear (turban, hood) see the render photos!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\nAll hand items are in 2 versions for both right and left hand. All hand items have versions of human hands for average-sized figures, and monster hands for larger characters such as trolls, etc. All items come in left and right handed versions.\u003cbr\u003e\n\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale, the parts fit our \u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/modular-magnetic-dnd-figure-mage\/\"\u003efree figure of a mage.\u003c\/a\u003e (Mage’s height: 40 mm, Width: 35 mm, Base diameter: 25 mm) Neck diameter: 3.10 mm Lower body diameter: 6.30 mm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eIt fits all average-sized miniatures. Tested on Hero Forge figures.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe recommend printing with an SLA printer (0.025 mm layer height) Printing settings will vary greatly depending on your specific printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eASSEMBLY\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe holes in the models are prepared for inserting magnets (2 mm diameter, 0.90 mm high)\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere. \u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/A6QtOraIAfQ\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTAGS:\u003cbr\u003e\n\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003eDnD, hero forge, modular, magnetic, desert, magic, miniature, mage, stl, SLA, figure, statuette, statue, accessories, weapons, dungeons, dragons, dungeons and dragons, persia, flying carpet\u003c\/span\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704780636540,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/DesertTravels_DND_3Demon_Overview-1_640ccf3b-680d-4195-a6f5-2fb0e174c73c.jpg?v=1756970826"},{"product_id":"mausritter-fellowship-dnd-miniatures","title":"Mausritter Fellowship DnD Miniatures","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a digital 3D printable \u003cstrong\u003ecollection of DnD Mouseling heroes\u003c\/strong\u003e compatible with \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/mausritter.com\/\"\u003eMausritter\u003c\/a\u003e\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e fantasy adventure roleplaying game.\u003cbr\u003e\u003c\/span\u003e\u003cb\u003eEnrich your Mausritter adventures with 3D Printable Mouseling Heroes. \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMausritter, by Isaac Williams, is a free fantasy adventure game where you play teensy tiny mice, doing teensy tiny things in a huge and dangerous world, full of magic.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur fellowship of \u003c\/span\u003e\u003cb\u003e6 original mouse characters\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e is designed to bring a new dimension of excitement to your tabletop adventure. :) Crafted with meticulous attention to detail, our Mouseling heroes are perfectly tailored to complement the whimsical world of Mausritter.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\" style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe Elder Mouse Druid 🌿: Wise and weathered, the Elder Mouse is a beacon of knowledge\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\" style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe Small but Mighty Magi 🔮: Small in stature but mighty in magical prowess.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\" style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe Paladin of Cheese🛡️: Clad in shimmering armor, this tank is adorned with symbols of dairy devotion\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\" style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe Mouser Knight ⚔️: Swift as a dart and sharp as a needle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\" style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMiss Mouse Explorer🗡️: A shadow in the night and a whisper on the wind, Miss Rogue Mouse is a master of stealth and exploration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\" style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe Rat Ranger Archer 🏹: A solitary figure amidst the wilderness of Mausritter, the Rat Ranger is a master of the bow and the wilds.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe download contains models split for the best SLA printing. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003cb\u003eSIZE\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale the figures are from 30 mm to 45 mm tall.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can scale the models as you wish.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe recommend printing with an SLA printer (0.025 mm layer height) Printing settings will vary greatly depending on your specific printer. Our recommended slicer of choice for SLA is Lychee Slicer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We are not affiliated with \u003c\/span\u003e\u003ca href=\"https:\/\/mausritter.com\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMausritter\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere.\u003c\/a\u003e\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704859279740,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/mausritter_mouse_dnd_stl_figure_3demon_3dprint_37ca0cfa-45f9-440a-90c0-6f7effc38838.jpg?v=1756971708"},{"product_id":"karak-ii-dark-general-and-praetorians","title":"Karak II Dark General and Praetorians","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is a digital 3D printable model of \u003c\/span\u003e\u003cb\u003eDark General and Praetorians miniatures\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e compatible with \u003c\/span\u003e\u003ca href=\"https:\/\/eshop.albi.cz\/karak-2\/\"\u003e\u003cb\u003eKarak 2\u003c\/b\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e tabletop game.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe download contains 2 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emodels in STL ready to be 3D printed on any SLA 3D printer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDesigned with meticulous attention to detail, our miniatures are perfectly tailored to complement your Karak II tabletop adventure. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eSIZE\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale, the \u003cstrong\u003eDark General'\u003c\/strong\u003es dimensions are:\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eWidth\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e52,28 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eLength\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e35,06 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003eHeight\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e53,87 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe \u003c\/span\u003e\u003cb\u003ePraetorian miniature is 26 mm\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e tall.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can scale the models as you wish in your slicer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003cb\u003e3D PRINTING SETTINGS\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe recommend printing with an SLA printer (0.025 mm layer height) Printing settings will vary greatly depending on your specific printer. Our recommended slicer of choice for SLA is Lychee Slicer.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. \u003cstrong\u003eWe are not affiliated with Karak II. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe make many cosplay accessories but also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere.\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704865964412,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Karak_2_Dark_Knight_3D_Print_STL_cover-1_b715b621-46d0-40ba-960b-3e8d7515fe6b.jpg?v=1756971781"},{"product_id":"low-poly-ash-misty-and-brock-from-pokemon","title":"Low Poly Ash, Misty and Brock from Pokemon","description":"\u003cp\u003e\u003cb\u003eLow Poly Ash, Misty and Brock from Pokemon!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eMeet Ash, Misty \u0026amp; Brock! Join the adventure with these iconic Pokémon trainers!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAsh, Misty and Brock \u003c\/b\u003elow poly models!\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColors separate\u003c\/b\u003e with and without multi-material 3D printer\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e2 sizes\u003c\/b\u003e of each model\u003c\/li\u003e\n\u003cli\u003e3MF file included for \u003cb\u003eBambu Studio\u003c\/b\u003e and\u003cb\u003e Prusaslicer\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eAsh and Misty version with eyes added!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWe’ve made 2 types of each model:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeparate parts version, allowing printing in color \u003cb\u003ewithout a multi-material printer\u003c\/b\u003e. Some parts were printed with layer color changes which you can \u003ca href=\"https:\/\/help.prusa3d.com\/article\/color-change_1687\"\u003eeasily set in Prusa Slicer\u003c\/a\u003e or you can do just a manual filament change at the right time. Scaled to \u003cb\u003e8% of real life size.\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMulti-material printer version\u003c\/b\u003e, featuring merged models with painted polygons. Scaled to \u003cb\u003e4% of real life size. \u003c\/b\u003eYou can change it to any size you like.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe bigger scale will also look better on your shelf!\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAssembly videos available on our You Tube channel:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/shorts\/iVf5drG_5u4\"\u003eAsh\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/shorts\/hOkFRme60Pw\"\u003eMisty\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/shorts\/AburTVkuQ5k\"\u003eBrock\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eTo extend your Low Poly Pokemon collection you can take a look at our Pokémon selection:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/pokemon\/\"\u003eOur First Generation Pokémon Collection\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2019\/08\/3Demon-pokemon-low-poly-main-scaled.jpg\" rel=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/pokemon\/\"\u003e\u003cimg class=\"alignnone wp-image-37890 size-medium\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2019\/08\/3Demon-pokemon-low-poly-main-300x231.jpg\" alt=\"\" width=\"300\" height=\"231\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/low-poly-pokemon-generation-2\/\"\u003eOur First Generation Pokémon Collection\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2021\/12\/Pokemon_Low_Poly_3D_print_stl_gen_2_collection_03.jpg\" rel=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/low-poly-pokemon-generation-2\/\"\u003e\u003cimg class=\"alignnone wp-image-108887 size-medium\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2021\/12\/Pokemon_Low_Poly_3D_print_stl_gen_2_collection_03-300x231.jpg\" alt=\"\" width=\"300\" height=\"231\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended layer height: 0.1 mm to 0.2 mm.\u003c\/li\u003e\n\u003cli\u003eAll parts that are designed to be printed without support and are labeled with '\u003ci\u003eno_supp\u003c\/i\u003e'.\u003c\/li\u003e\n\u003cli\u003eFiles for multi-material printers are labeled with '\u003ci\u003emulticolor\u003c\/i\u003e'.\u003c\/li\u003e\n\u003cli\u003eIncluded 3MF files contain the settings we used in Prusa Slicer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe large 3MF file is divided into sections by color so you can select all the models with CTRL+A and move them around to place a single color on the print bed and \u003cb\u003eprint all parts of the same color at a time.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAbout the designs:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis model is a labour of love from our team at 3Demon. This model was designed by Katarína from our team. While we're not affiliated with the Pokémon company, our fan-made models are crafted with dedication and passion for fellow Pokémon enthusiasts. If you don't have a 3D printer, we encourage you to seek local printing services to bring these models to life.\u003c\/p\u003e\n\u003cp\u003eWe are a small group of people based in Prague, Czech Republic. Follow us on social media and explore more of our creations:\u003cbr\u003e\n\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003eOur social media links\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704888803708,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Ash_Misty_Brock_photo_main_3Demon_48191336-36d9-470c-a4c8-4e2af7c6b002.png?v=1756971857"},{"product_id":"magnetic-dnd-postapocalyptic-pack","title":"Magnetic DnD - Postapocalyptic Pack","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese are digital 3D printable models of \u003cstrong\u003eweapons, body parts, and accessories for modular magnetic DnD miniatures.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe download contains STL files with magnet slots ready to be 3D printed on your SLA printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe Postapocalyptic Pack includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eweapons (cyber hands, baseball bats, hand axes, road signs, prosthetics…)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003ehand items (compass, can of beans, toolbox tools…)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eback accessories (backpacks, gas tanks, gas masks, spider legs…)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eMount - car - 2 Versions – with and without rider’s legs.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003econdition (acid melt)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003ecompanion\/enemy – depends on the point of view I guess (robots)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003ecloak and headgear (hood, gas mask, robot) … see the render photos!\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll hand items are in 2 versions for both right and left hand.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eSIZE\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale, the parts fit our body figure. (Body’s height: 17 mm, width: 21 mm, length: 14 mm)\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eCompleted body can be up to height: 35 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e3D PRINTING SETTINGS\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe recommend printing with an SLA printer (0.025 mm layer height) Printing settings will vary greatly depending on your specific printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eASSEMBLY\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eThe holes in the models are prepared for inserting magnets (2 mm diameter, 0.90 mm high)\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: \u003c\/span\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55704974000508,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/DnD_Post_Apocalypse-3Demon-1_a5b830bd-2603-4808-ac05-31919fe80b40.jpg?v=1756972176"},{"product_id":"astro-bot-aloy-horizon","title":"Astro Bot - Aloy Horizon","description":"\u003cp\u003eThis is a fan-made 3D printable figure of \u003cstrong\u003eAstro Bot\u003c\/strong\u003e, inspired by the adorable character from \u003cstrong\u003eAstro's Playroom game\u003c\/strong\u003e.\u003cbr\u003e\nIt’s 71 mm (2.8 inches) tall and full of charm.\u003c\/p\u003e\n\u003cp\u003eThe files are designed for 3D printing, especially on SLA printers to capture all the fine details.\u003c\/p\u003e\n\u003cp\u003eYou can choose between\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ea standalone figure\u003c\/li\u003e\n\u003cli\u003eor one with a base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eI’ve also included pre-supported files for Lychee Slicer to make things easier for you. :)\u003c\/p\u003e\n\u003ch2\u003eSIZE\u003c\/h2\u003e\u003cp\u003eWidth 51 mm\u003cbr\u003e\nLength 48 mm\u003cbr\u003e\nHeight 71 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size, the model will print well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out the whole \u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/astros-playroom-astrobot-statues\/\"\u003eAstro’s Playroom Astrobot Statues\u003c\/a\u003e!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2024\/12\/Link_Astro_Playroom_Astrobot_Statues_3Demon.jpg\"\u003e\u003cimg class=\"alignnone wp-image-149972 size-large\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2024\/12\/Link_Astro_Playroom_Astrobot_Statues_3Demon-1024x423.jpg\" alt=\"\" width=\"1024\" height=\"423\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e3D PRINTING SETTINGS\u003c\/h2\u003e\u003cp\u003eWe recommend printing with an SLA printer (0.025 mm layer height) Printing settings will vary greatly depending on your specific printer. Our recommended slicer of choice for SLA is Lychee Slicer.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003eThis \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55705047597436,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Aloy_ps_bot_color_1_3Demon-1_f03ed0a7-9e1d-441a-8ee3-a0a0e1603143.jpg?v=1756972505"},{"product_id":"astro-bot-jin-sakai-ghost-of-tsushima","title":"Astro Bot - Jin Sakai Ghost of Tsushima","description":"\u003cp\u003eThis is a fan-made 3D printable figure of \u003cstrong\u003eAstro Bot\u003c\/strong\u003e, inspired by the adorable character from \u003cstrong\u003eAstro's Playroom game\u003c\/strong\u003e.\u003cbr\u003e\nIt’s 69 mm (2.7 inches) tall and full of charm.\u003c\/p\u003e\n\u003cp\u003eThe files are designed for 3D printing, especially on SLA printers to capture all the fine details.\u003c\/p\u003e\n\u003cp\u003eYou can choose between\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ea standalone figure\u003c\/li\u003e\n\u003cli\u003eor one with a base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eI’ve also included pre-supported files for Lychee Slicer to make things easier for you. :)\u003c\/p\u003e\n\u003ch2\u003eSIZE\u003c\/h2\u003e\u003cp\u003eWidth 48 mm\u003cbr\u003e\nLength 48 mm\u003cbr\u003e\nHeight 69 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size, the model will print well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out the whole \u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/astros-playroom-astrobot-statues\/\"\u003eAstro’s Playroom Astrobot Statues\u003c\/a\u003e!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2024\/12\/Link_Astro_Playroom_Astrobot_Statues_3Demon.jpg\"\u003e\u003cimg class=\"alignnone wp-image-149972 size-large\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2024\/12\/Link_Astro_Playroom_Astrobot_Statues_3Demon-1024x423.jpg\" alt=\"\" width=\"1024\" height=\"423\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e3D PRINTING SETTINGS\u003c\/h2\u003e\u003cp\u003eWe recommend printing with an SLA printer (0.025 mm layer height) Printing settings will vary greatly depending on your specific printer. Our recommended slicer of choice for SLA is Lychee Slicer.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003eThis \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55705047662972,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/JIn_ps_bot_color_1_3Demon-1_42c2aa63-bcf6-444c-bc80-0c4abf5c1e0e.jpg?v=1756972511"},{"product_id":"astro-bot-ratchet-clank","title":"Astro Bot - Ratchet \u0026 Clank","description":"\u003cp\u003eThis is a fan-made 3D printable figure of \u003cstrong\u003eAstro Bot\u003c\/strong\u003e, inspired by the adorable character from \u003cstrong\u003eAstro's Playroom game\u003c\/strong\u003e.\u003cbr\u003e\nIt’s 71 mm (2.8 inches) tall and full of charm.\u003c\/p\u003e\n\u003cp\u003eThe files are designed for 3D printing, especially on SLA printers to capture all the fine details.\u003c\/p\u003e\n\u003cp\u003eYou can choose between\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ea standalone figure\u003c\/li\u003e\n\u003cli\u003eor one with a base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eI’ve also included pre-supported files for Lychee Slicer to make things easier for you. :)\u003c\/p\u003e\n\u003ch2\u003eSIZE\u003c\/h2\u003e\u003cp\u003eWidth 48 mm\u003cbr\u003e\nLength 51 mm\u003cbr\u003e\nHeight 71 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size, the model will print well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out the whole \u003ca href=\"https:\/\/3d-mon.com\/3d-model\/groupe\/unisex3dprintmodel\/astros-playroom-astrobot-statues\/\"\u003eAstro’s Playroom Astrobot Statues\u003c\/a\u003e!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2024\/12\/Link_Astro_Playroom_Astrobot_Statues_3Demon.jpg\"\u003e\u003cimg class=\"alignnone wp-image-149972 size-large\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2024\/12\/Link_Astro_Playroom_Astrobot_Statues_3Demon-1024x423.jpg\" alt=\"\" width=\"1024\" height=\"423\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e3D PRINTING SETTINGS\u003c\/h2\u003e\u003cp\u003eWe recommend printing with an SLA printer (0.025 mm layer height) Printing settings will vary greatly depending on your specific printer. Our recommended slicer of choice for SLA is Lychee Slicer.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp style=\"margin: 0 cm; margin-bottom: .0001 pt;\"\u003eThis \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55705049039228,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Ratchet_ps_bot_color_2_3Demon-1_c5e07de9-6126-402b-8d33-c0290de7a3b0.jpg?v=1756972516"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/collections\/collection_figure.png?v=1778245987","url":"https:\/\/3d-mon.com\/collections\/figures\/concept-art.oembed","provider":"3Demon","version":"1.0","type":"link"}