{"title":"All","description":"","products":[{"product_id":"drift-mask-for-3d-printing","title":"Drift mask - Fortnite","description":"\u003cp\u003eFortnite - Drift's kitsune mask - \u003cstrong\u003eDigital 3D printable file\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Drift is the name of one of the legendary male skin outfits for the game Fortnite Battle Royale. This is mask available in the skin outfit at stage 4.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=1zNtMwvNhHc\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/U8YWj-9izTA\u003c\/p\u003e\n\u003cp\u003eThis 3D print file is a wearable mask. The mask is quite big and is meant to be post-processed.\u003c\/p\u003e\n\u003cp\u003eFiles contain cut pieces of the mask ready to be 3D printed on a regular sized 3D printer and complete mask files, that are not cut into smaller pieces for people with bigger printers. Now with pre-cut holes for a headband.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the helmets inner dimensions are:\u003cbr\u003eWidth approx. 215 mm\u003cbr\u003eDepth approx. 175 mm (overall, not inner)\u003cbr\u003eHeight approx. 327 mm (without ears)\u003cbr\u003eWall thickness approx. 5-6 mm\u003c\/p\u003e\n\u003cp\u003eYou can scale the model according to your head measurements. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eAs the mask is quite big, it is meant to be post-processed. We recommend a layer height of 0.15 to 0.3 mm on FDM printers. For reliable printing, we also recommend setting a brim to the helmets shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703790813564,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/IMG_20181025_101539-kopie_bcb67469-f37c-4d83-a833-13a8f7de4c40.jpg?v=1759926719"},{"product_id":"ecorche-for-printing-3d-print-model","title":"Ecorche for printing","description":"\u003cp data-end=\"45\" data-start=\"0\"\u003eDigital 3D printable model of a \u003cstrong\u003emale body \u003c\/strong\u003e- an \u003cstrong\u003ee\u003c\/strong\u003e\u003cstrong data-end=\"44\" data-start=\"33\"\u003ecorche figure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-is-only-node=\"\" data-is-last-node=\"\" data-end=\"269\" data-start=\"47\"\u003eAn \u003cstrong data-end=\"61\" data-start=\"50\"\u003eécorché\u003c\/strong\u003e is a figure shown without skin, revealing the underlying muscles and skeletal structure. It is commonly used in figure drawing, anatomy studies, and sculpture to better understand human form and musculature.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis STL file is divided into two parts. You can scale the model to your desired size in your slicer.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e Layer height: 0.15 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e Infill: 20% gyroid pattern\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e Supports: 30° organic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703791305084,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Ecorche_base_2_3Demon_2509dba5-f805-44bf-be0d-a399d66de459.jpg?v=1756926429"},{"product_id":"raven-crown-smite-3d-print-model","title":"Raven Crown - Smite","description":"\u003cp\u003eRaven Crown - Crown from Smite - Morrigan\u003c\/p\u003e\n\u003cp\u003eThis model is a wearable crown. The crown is quite big and is meant to be post-processed.\u003c\/p\u003e\n\u003cp\u003eFiles contain cut pieces of the crown ready to be 3D printed.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the helmets inside dimension are:\u003cbr\u003e\nInternal diameter: 174 mm (6.8 inches)\u003cbr\u003e\nHeight approx. 180 mm (7 inches)\u003c\/p\u003e\n\u003cp\u003eParts: 3\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703791927676,"sku":null,"price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/03_render_scene_one-thing-back.126_439c40d1-3485-4043-93e3-677ede627c3f.png?v=1756926495"},{"product_id":"roadhog-mask-overwatch-game-3d-print-model","title":"Roadhog mask - Overwatch game","description":"\u003cp\u003e\u003cstrong\u003eRoadhog game character mask\u003c\/strong\u003e from \u003cstrong\u003eOverwatch\u003c\/strong\u003e online FPS game from Blizzard.\u003cbr\u003e\nContains 7 easily printable . stl files, all aligned to the printing platform.\u003c\/p\u003e\n\u003cp\u003eFor more info about this character, check the link below:\u003cbr\u003e\n\u003ca href=\"https:\/\/overwatch.gamepedia.com\/Roadhog\"\u003ehttps:\/\/overwatch.gamepedia.com\/Roadhog\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSCALE SETTINGS AND OPTIONS:\u003c\/p\u003e\n\u003cp\u003eThe default size is set to the dimensions as mentioned in the infographic picture (width 196 mm without gas respirators, height 250 mm without gas respirators) with a thickness of the mask around 5,5 mm. It should be sufficient for the average head size and there is also some tolerance to attach cushions from the inner side for comfortable wearing. For smaller heads, we recommend to downscale the mask to around 80-90%.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eAll parts are aligned to the bed and easily printable. Supports are required. The recommended layer height is 0.2-0.3 mm on FDM printers.\u003c\/p\u003e\n\u003ch2\u003e🛠️ Assembly Instructions\u003c\/h2\u003e\n\u003cp\u003eCheck the infographic picture for the assembly process.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703804051836,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Roadhog_mask_Overwatch_color_1_3Demon_3838b3ed-0ee6-4bac-9103-738241b42be7.jpg?v=1756926723"},{"product_id":"roadhog-scrap-gun-overwatch-game-3d-print-model","title":"Roadhog scrap gun - Overwatch game","description":"\u003cp\u003eGun is sliced to parts as described on infographic\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eAs the gun is meant to be post-processed , we recommend a height of layer from 0.2 to 0.3 mm on FDM printers. All parts are aligned to printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. It will ensure, that the part won't come off the printing platform during the printing process.\u003c\/p\u003e\n\u003ch2\u003e🛠️ Assembly Instructions\u003c\/h2\u003e\n\u003cp\u003eAll parts are described on infographic pictures.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ehttps:\/\/youtube.com\/shorts\/viZSJmO--Es?si=pOLyvQ3LB8mhrfzx\u003c\/span\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703804084604,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/IMG_20180815_161450_5a94dc4f-40ee-4377-b74b-b5dffd41af2d.jpg?v=1756926727"},{"product_id":"warrior-on-horse-kit-for-3d-printing-3d-print-model","title":"Warrior on Horse Statue","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis is 3D printable model of Warrior on Horse ready to be 3D printed and painted as you desire\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFiles contain \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003epieces of\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e the model (both STL and OBJ) ready to be 3D printed \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eand 3D model files that are not cut into smaller pieces (both STL and OBJ)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=UKa8QoAGXyI\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe total dimensions are approx.:\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eWidth: 120 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eLength: 192 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHeight: 200 \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ebut you can scale the model according to your needs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe recommend a layer height \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eof 0.1\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e to \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e0.3\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIf you’d like to suggest what we should do next, check out our \u003ca href=\"https:\/\/3d-mon.com\/preorder\/\"\u003epre-order\u003c\/a\u003e page and fill in your suggestion: 3d-mon.com\/preorder\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis model was created by\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e Vojtěch Severa.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703804150140,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/ss-01-1_d442ead2-57a6-439e-8adf-54127dffd442.png?v=1756926732"},{"product_id":"horda-dog-tag-free-3d-print-model","title":"Horde Dog Tag - World of Warcraft","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e3D printable model of a Horde keychain\/dog tag from World of Warcraft.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703804871036,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/IMG_20220623_142734_1d3b8847-1772-43f9-91bc-6294f5d27596.jpg?v=1756926746"},{"product_id":"wakanda-okoye-buckle-3d-print-model","title":"Wakanda Okoye buckle","description":"\u003cp\u003eThis is a digital 3D printable model of \u003cstrong\u003eWakanda Okoye's buckle\u003c\/strong\u003e from the \u003cspan style=\"box-sizing: border-box; margin: 0 px; padding: 0 px;\"\u003e\u003cstrong\u003emovie Black Panther\u003c\/strong\u003e\u003c\/span\u003e .\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale, the model’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 65 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 9 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 70 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe use these settings for most of our prints:\u003cbr\u003e\nLayer height 0.15 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45°\u003cbr\u003e\nFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703805886844,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/okoye-buckle-3demon_9b390102-49b7-4782-8bbc-7b5e6f6641f3.jpg?v=1756926825"},{"product_id":"akamas-shoulder-plate-world-of-warcraft","title":"Akama’s Shoulder Plate – World of Warcraft","description":"\u003cp\u003eThis is a digital 3D printable model of \u003cstrong\u003eAkama’s Shoulder Plate from a videogame World of Warcraft.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the model’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 150 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 259 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 279 mm\u003c\/p\u003e\n\u003cp\u003eYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe use these settings for most of our prints:\u003cbr\u003e\nLayer height 0.2 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45°\u003cbr\u003e\nFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories, but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ehttps:\/\/3d-mon.com\/links\/\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703805919612,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Akamas-Shoulder-Plate-6_62de4535-fbdc-407c-862b-8fe976a0a677.jpg?v=1756926827"},{"product_id":"kings-adjutants-clip-from-game-of-thrones-free-3d-print-model","title":"Hand of the King — GoT","description":"\u003cp\u003eThe File of the model contains two versions. The first with, in the base, the possibility to insert a brooch to wear the Hand of the King. The second version does not contain that.\u003c\/p\u003e\n\u003cp\u003eThe dimensions of the brooch are: 5 x 25 mm\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703805952380,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/IMG_20220623_144950-1_c4f66275-5ce3-46c0-b408-7ff26b615290.jpg?v=1756926833"},{"product_id":"witcher-cat-free-3d-print-model","title":"Cat School Medallion — The Witcher","description":"\u003cp\u003eThis is a digital 3D printable model of the Cat Pendant from The Witcher.\u003c\/p\u003e\n\u003cp\u003eThe download contains STL of the model ready to be 3D printed on a 200 mm print bed placed on the print bed as we would print it to save you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the model’s dimensions are approximately:\u003cbr\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e 70 mm\u003cbr\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e 59 mm\u003cbr\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e 25 mm\u003cbr\u003e\nYou can scale the model as you wish. When scaling down, we recommend printing on an SLA printer.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe use these settings for most of our prints:\u003cbr\u003e\nLayer height 0.15 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45°\u003cbr\u003e\nFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703806706044,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/IMG_3739_eb9ac2a4-74da-4f04-b6b5-c6174c78fa6f.jpg?v=1756926879"},{"product_id":"overwatch-roadhog-gun-bajie-3d-print-model","title":"Overwatch Roadhog Gun Bajie","description":"\u003cp\u003eRoadhog Gun Bajie skin for Lunar New Year, 3D printable model. The barrel part should be moveable, so you can load the gun, but it might need some physical adjusting to move smoothly.\u003c\/p\u003e\n\u003cp\u003eThis model is a weapon intended for 3D printing. The gun is quite big and is meant to be post-processed.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the gun ready to be 3D printed and complete gun files, that are not separated or cut into smaller pieces.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the guns dimensions are:\u003cbr\u003e\nWidth approx. 126 mm\u003cbr\u003e\nLength approx. 320 mm\u003cbr\u003e\nHeight approx. 220 mm\u003cbr\u003e\nYou can scale the model according to your liking.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eAs the gun is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703807263100,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/roadhog_gun_bajie_s-pozad_C3_ADm-final_58f63c27-036e-4bd2-8ac6-18cf4c0d4d85.jpg?v=1756926927"},{"product_id":"akama-mask-wow-3d-print-model","title":"Akama mask - World of Warcraft","description":"\u003cp\u003eDigital 3D printable file - Mask of Akama face from the World of Warcraft.\u003c\/p\u003e\n\u003cp\u003eDesigned as a wearable mask. Use a solder tool or hot needle to create holes for attachment strings where needed. \u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the mask ready to be 3D printed and complete mask files, that are not cut into smaller pieces. They also include Akama’s full head as an object, that is not a wearable mask.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eInside width approx. 200 mm\u003cbr\u003eWidth approx. 496 mm\u003cbr\u003eLength approx. 217 mm\u003cbr\u003eHeight approx. 600 mm\u003cbr\u003eWall thickness 5 mm\u003cbr\u003eYou can scale the model according to your head measurements. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eAs the mask is quite big, it is meant to be post-processed. We recommend a layer height of 0.2 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the masks shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703807328636,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/akama-main_28835c37-4e9d-437b-b298-b66c24dd0dcf.jpg?v=1756926934"},{"product_id":"vault-boy-3d-print-model","title":"Vault Boy Bobblehead figures - Fallout","description":"\u003cp\u003eCollection of \u003cstrong\u003edigital 3D printable\u003c\/strong\u003e models of the \u003cstrong\u003eVault Boy Bobblehead figures\u003c\/strong\u003e from\u003cstrong\u003e Fallout 4.\u003cbr\u003e\n\u003c\/strong\u003eVault Boy is the mascot character of the Vault-Tec corporation within the Fallout universe.\u003cbr\u003e\nThe download contains \u003cstrong\u003e6 figures\u003c\/strong\u003e representing the following perks:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrenght\u003c\/li\u003e\n\u003cli\u003ePerception\u003c\/li\u003e\n\u003cli\u003eRepair\u003c\/li\u003e\n\u003cli\u003eEndurance\u003c\/li\u003e\n\u003cli\u003eMelee\u003c\/li\u003e\n\u003cli\u003eEnergy Weapons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale, the figures dimensions are:\u003cbr\u003e\nLength approx. 60 mm (2,32 inches)\u003cbr\u003e\nHeight approx.107 mm (4,25 inches)\u003c\/p\u003e\n\u003cp\u003eYou can scale the model according to your liking.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe recommend a layer height of 0.1 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Printing settings will vary greatly depending on your specific printer. Supports: 30-45°.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703808246140,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/vault_bobblehead_stl_3demon_3dprint_cover_8d736447-6dad-42e4-8e44-2e37530d2d8c.jpg?v=1756926996"},{"product_id":"miloushek-creature","title":"Miloushek creature","description":"\u003cp\u003eHigh detailed \u003cstrong\u003edigital 3D model\u003c\/strong\u003e of a caricature model of Miloš Zeman - president of the Czech Republic - crossed with an animal.\u003cbr\u003e\n3D Model ready for Simple \u003cstrong\u003e3D printing\u003c\/strong\u003e FDM, SLS and SLA printer.\u003cbr\u003e\nData ready to 3D printing:\u003cbr\u003e\n1 part full*. stl (full detail)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703810572668,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/IMG_1678_e00bbb5c-0c6e-4b65-a2db-8c502cd0299f.jpg?v=1756927057"},{"product_id":"goblin-slayer-helmet-print-model","title":"Goblin Slayer helmet","description":"\u003cp\u003eThis is a \u003cstrong\u003edigital 3D printable model\u003c\/strong\u003e of the Goblin Slayer helmet from the Goblin Slayer.\u003c\/p\u003e\u003ch2\u003e📦 Included Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  STL (cut for 200mm printer beds)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  STL (uncut for larger printers)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Assembled OBJ file (for easy scaling)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  All cut parts are placed on the print bed just as we would print them, saving you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  Width: 315 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Length: 265 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Height: 337 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  Feel free to scale the model to fit your needs. Learn more about sizing and scaling for cosplay \u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  Layer height: 0.15 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Infill: 10% gyroid pattern\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Supports: 30° organic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  For taller parts, use a brim for better bed adhesion\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  Settings may vary depending on your printer, so treat these as a starting point.\u003c\/p\u003e\n\u003cp\u003e   No 3D printer? No problem! Search for your local 3D printing services.\u003cbr\u003e\u003cbr\u003eThis fan-made model was brought to life by \u003cstrong\u003e3Demon\u003c\/strong\u003e, a team of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been creating 3D printable models for over a decade, from cosplay accessories to all sorts of interesting designs.\u003c\/p\u003e\n\u003cp\u003e  ✨ Check out more of our creations or join our community \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703810605436,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Goblin_Slayer_helmet_color_2_3Demon_830ca0b4-8077-4a1d-b902-d4d93ff812b7.jpg?v=1771833550"},{"product_id":"fortnite-high-stakes-wild-card-masks-bundle-3d-print-model","title":"Fortnite - High Stakes - Wild Card masks bundle 3D print model","description":"\u003cp\u003eBargain bundle of all Fortnite Wild Card skin masks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded are . stl files for both clean and wild card masks.\u003c\/li\u003e\n\u003cli\u003eBoth seamless mask files for big printers and divided parts files are included.\u003c\/li\u003e\n\u003cli\u003eEasy assembly with pins.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll smaller divided parts are aligned to headbed and prepared for printing. Seamless and big parts need to be set in space according to your printer.\u003c\/p\u003e\n\u003cp\u003eThe Wild Card is the name of one of the legendary male skin outfits for the game Fortnite Battle Royale. The Wild Card features a mysterious male avatar wearing an all-white tuxedo suit with a black necktie.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale the helmets inner dimensions are:\u003cbr\u003e\nWidth approx. 196 mm\u003cbr\u003e\nDepth approx. 132 mm (overall, not inner)\u003cbr\u003e\nHeight approx. 280 mm (without ears)\u003cbr\u003e\nWall thickness approx. 5 mm\u003c\/p\u003e\n\u003cp\u003eYou can scale the model according to your head measurements. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eAs the mask is quite big, it is meant to be post-processed. We recommend a layer height of 0.15 to 0.3 mm on FDM printers. For reliable printing, we also recommend setting a brim to the helmets shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703810638204,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/bundle_339173e6-8cb6-4b86-a013-c335995bc1f1.jpg?v=1756927066"},{"product_id":"overwatch-ashe-gun","title":"Ashe Rifle Overwatch - The Viper - Cinematic","description":"\u003cp\u003eAshe’s rifle from overwatch cinematic\u003c\/p\u003e\n\u003cp\u003eAshe quickly fires her rifle from the hip or uses her weapon’s aim-down sights to line up a high\u003cbr\u003e\ndamage shot. Fan-made\u003cbr\u003e\nThis model is fully sized rifle, that does not shoot.\u003cbr\u003e\nFiles contain pieces of the rifle ready to be 3D printed and put together and a complete rifle in obj\u003cbr\u003e\nand stl.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the rifle dimensions are:\u003cbr\u003e\nLength approx. 1200 mm (47 inches)\u003cbr\u003e\nWidth approx. 77 mm\u003cbr\u003e\nHeight approx. 269 mm\u003cbr\u003e\nYou can scale the model according as you like.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eAs the rifle is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3\u003cbr\u003e\nmm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the\u003cbr\u003e\nparts need minimal or no use of printing supports to save printing time and filament. Printing\u003cbr\u003e\nsettings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703811555708,"sku":null,"price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/ashe_rifle-main_render.48_301fa287-1d52-4fa8-a389-00c32369352c.png?v=1756927114"},{"product_id":"game-of-thrones-cookie-cutters","title":"Game of thrones cookie cutters","description":"\u003cp\u003egame of thrones cookie cutters\u003c\/p\u003e\n\u003cp\u003eLannister crest,\u003cbr\u003e\nStark crest,\u003cbr\u003e\nTully crest,\u003cbr\u003e\nBolton crest,\u003cbr\u003e\nArrym crest,\u003cbr\u003e\nGreyjoy crest,\u003cbr\u003e\nTyrell crest,\u003cbr\u003e\nTargarryen crest,\u003cbr\u003e\nBaratheon crest,\u003cbr\u003e\nBaelish crest,\u003cbr\u003e\nMormont crest,\u003cbr\u003e\nClegane crest,\u003cbr\u003e\nMartell crest,\u003cbr\u003e\nSrark volf,\u003cbr\u003e\nValar morghulis,\u003cbr\u003e\nthreeheaded dragone\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703811654012,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/game-of-thrones_51593c57-442f-4088-975b-be7707b42bd3.jpg?v=1756927128"},{"product_id":"jaylah-extendlabe-staff-star-trek-beyond-print","title":"Jaylah Extendable Staff - Star Trek","description":"\u003cp\u003eJaylah - Staff - Star Trek Beyond\u003c\/p\u003e\n\u003cp\u003eIn time, Jaylah became a formidable warrior, skilled in martial arts and in wielding a quarterstaff that doubled as a rifle. (Star Trek Beyond)\u003c\/p\u003e\n\u003cp\u003eThis model is an extendable staff of Jaylah. The large pole does not have to be 3D printed and a standard 3\/4 inch pipe can be used (26.67 mm). There is a mechanism which allows the parts to lock in place in the shortest and longest position. Depending on the quality of the print it made need a bit of tweaking on order to work properly. Inside the control panel is enough space for electronics. The buttons are also separate so they can be made into working buttons.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the staff ready to be 3D printed and a file where the parts are aligned so that you know where to place them after you print them.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale when the staff is extended it is 1326 mm long, when retracted it is 945 mm. None of the parts exceed 200 mm (except for the pole which can be switched out for a 3\/4 inch (26.67 mm) pipe.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eThe staff is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the thinner parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703811785084,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/render_jaylah_background_4fc7f86b-51b1-4e6a-a88b-50cb4c273282.png?v=1756927139"},{"product_id":"christmas-cookie-cutters","title":"Christmas cookie cutters","description":"\u003cp\u003eChristmas cookie cutters\u003c\/p\u003e\n\u003cp\u003eangel,\u003cbr\u003e\ndareček,\u003cbr\u003e\nGrinc,\u003cbr\u003e\njack,\u003cbr\u003e\npalm,\u003cbr\u003e\ngoggles,\u003cbr\u003e\ngingerbread 2,\u003cbr\u003e\nsock,\u003cbr\u003e\nsnowman,\u003cbr\u003e\nsanta claus,\u003cbr\u003e\nreindeer,\u003cbr\u003e\ntree,\u003cbr\u003e\ncap,\u003cbr\u003e\nflake,\u003cbr\u003e\nzero,\u003cbr\u003e\nbell.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703811948924,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/chi1_b6a61206-41f3-49af-919f-a4896084c11d.jpg?v=1764233091"},{"product_id":"sinoalice-alice-breaker-sword","title":"Alice Breaker Sword","description":"\u003cp\u003eSINo ALICE Alice Breaker Sword\u003c\/p\u003e\n\u003cp\u003eSINo ALICE is a fairy tale-themed smartphone video game developed by Pokelabo and published by Square Enix. This model is high detailed sword of the Alice Breaker character.\u003cbr\u003e\nFor more information about this character, please check this link: \u003ca href=\"https:\/\/sinoalice.wiki\/Alice\/Jobs\"\u003ehttps:\/\/sinoalice.wiki\/Alice\/Jobs\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the sword ready to be 3D printed and complete sword files, that are not cut into smaller pieces. Keep in mind that the model is quite big. We recommend using a metal rod to reinforce the model.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the sword dimensions are:\u003cbr\u003e\nHeight approx. 1603 mm (63.11 inches)\u003cbr\u003e\nWidth approx. 311 mm (12.24 inches)\u003cbr\u003e\nYou can scale the model according to your height. Model is pretty big.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eAs the sword is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703812047228,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/render_sword_scene.844_991bf019-67c6-483f-837e-3211129df9c0.jpg?v=1756927155"},{"product_id":"tarly-valyrian-sword-game-of-thrones","title":"Tarly Valyrian sword Heartbanes","description":"\u003cp\u003eTarly Valyrian sword\u003c\/p\u003e\n\u003cp\u003eHeartsbane is the ancestral Valyrian steel sword of House Tarly and you can know this from the Game of Thrones\u003cbr\u003e\nFor more information, please check this link: \u003ca href=\"https:\/\/nerdist.com\/a-closer-look-at-heartsbane-game-of-thrones-valyrian-steel-sword\/\"\u003ehttps:\/\/nerdist.com\/a-closer-look-at-heartsbane-game-of-thrones-valyrian-steel-sword\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the sword ready to be 3D printed and complete sword files, that are not cut into smaller pieces. Keep in mind that the model is quite big. We recommend using a metal rod to reinforce the model.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=CbVIOhOkBa8\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the sword dimensions are:\u003cbr\u003e\nHeight approx. 1349 mm (53.11 inches)\u003cbr\u003e\nWidth approx. 304 mm (11.96 inches)\u003cbr\u003e\nModel is pretty big you can print it a tiny sword if you like :)\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eAs the sword is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the helmets shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703812112764,"sku":null,"price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/render_sword_scene.784_bf057a27-1c6d-4c7e-bafc-4b6da27d1ab3.jpg?v=1756927159"},{"product_id":"catspaw-blade-game-of-thrones-dagger","title":"Arya Stark Cat's Paw dagger - Game of Thrones","description":"\u003cp\u003eArya Stark's Cat's Paw Dagger - Digital 3D printable model\u003c\/p\u003e\n\u003cp\u003eA blade of Valyrian steel that Catelyn Stark recovered from the assassin sent to finish her son Bran. It was taken to King’s Landing by Lady Stark and shown to Petyr Baelish, who identified it as belonging to Tyrion Lannister.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the blade ready to be 3D printed and complete blade files, that are not cut into smaller pieces.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the blade dimension are:\u003cbr\u003e\nWidth approx. 20 mm (0.78 inches)\u003cbr\u003e\nLength approx. 199 mm (7.83 inches)\u003cbr\u003e\nHeight approx. 16 mm (0.62 inches)\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe recommend a layer height of 0.2 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703812145532,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/render_knife.792_e6566ff1-1ec5-412c-ba9a-33f58ece5b94.jpg?v=1756927162"},{"product_id":"nhl-cookie-cutters","title":"NHL Cookie Cutters","description":"\u003cp\u003eNHL cookie cutters bundle\u003c\/p\u003e\n\u003cp\u003eALL NHL TEAMS + more!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese models are cookie cutters to be 3D printed. The thickness of the wall is 1 mm and the offset of the imprint is 3 mm. You can scale it a bit down or up if you have a smaller nozzle or print them with one perimeter and also choose to stop the print sooner if you want to make very thin cookies with the imprint.\u003c\/p\u003e\n\u003cp\u003eFiles contain stl cookie cutters as shown on the pictures. This model is fan-made\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale the cookies are on average 65 mm wide.\u003cbr\u003e\nYou can scale the models as you like but have in mind that at 100% scale the walls are 1 mm thin.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eWe recommend a layer height of 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. None of the parts need printing supports. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703813521788,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/IMG_20191206_155441-scaled_d87ed9f6-dbb3-4607-9e11-a9189acfa23e.jpg?v=1756927197"},{"product_id":"wow-cookie-cutters","title":"WoW Cookie Cutters","description":"\u003cp\u003eWo W cookie cutters\u003c\/p\u003e\n\u003cp\u003eWOW banners:\u003cbr\u003e\nHorde,\u003cbr\u003e\nKirin Tor,\u003cbr\u003e\nTauren,\u003cbr\u003e\nNight Elf,\u003c\/p\u003e\n\u003cp\u003eORC CLANS:\u003c\/p\u003e\n\u003cp\u003eShattered Hand,\u003cbr\u003e\nStormreaver,\u003cbr\u003e\nFrostwolf,\u003cbr\u003e\nShadowmoon,\u003cbr\u003e\nBleeding Hollow,\u003cbr\u003e\nWarsong,\u003c\/p\u003e\n\u003cp\u003eThese models are cookie cutters to be 3D printed. The thickness of the wall is 1 mm and the offset of the imprint is 3 mm. You can scale it a bit down or up if you have a smaller nozzle or print them with one perimeter and also choose to stop the print sooner if you want to make very thin cookies with the imprint.\u003c\/p\u003e\n\u003cp\u003eFiles contain stl cookie cutters as shown on the pictures. This model is fan-made\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale the cookies are on average 65 mm wide.\u003cbr\u003e\nYou can scale the models as you like but have in mind that at 100% scale the walls are 1 mm thin.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eWe recommend a layer height of 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. None of the parts need printing supports. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703813554556,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/wow-cuters_b51048ed-c568-4500-80f9-1ccb4bccc91d.jpg?v=1756927202"},{"product_id":"bumblebee-helmet","title":"Bumblebee - wearable helmet","description":"\u003cp\u003eThis is a digital 3D printable model of Bumblebee’s head from his 2018 solo movie. The head is designed as a wearable helmet.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFiles contain pieces of the helmet ready to be 3D printed on a 200 mm printer and complete helmet files, that are not cut into smaller pieces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003e- Width approx. 168 mm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e- Length approx. 235 mm\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e- The total height of the helmet is approx. 309 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLayer height 0.15 mm\u003c\/li\u003e\n\u003cli\u003eInfill 15%\u003c\/li\u003e\n\u003cli\u003eSupports 40°\u003c\/li\u003e\n\u003cli\u003eFor parts that are tall but have a small base, use a 5 mm brim for better bed adhesion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703813718396,"sku":null,"price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/main-image-bumblebee-3D-model-print-scaled_c228be07-5a5a-4ceb-8836-4ad2935cc44d.jpg?v=1756927217"},{"product_id":"bumblebee-bust","title":"Bumblebee bust","description":"\u003cp\u003eThis is a \u003cstrong\u003edigital 3D model of a bust of the adorable Bumblebee\u003c\/strong\u003e from the 2018 movie where he transforms into a VW Beetle.\u003c\/p\u003e\n\u003cp\u003eThis model is a half statue of bumblebee standing on a tire. This is not an easy print but should be well worth the effort.\u003c\/p\u003e\n\u003cp\u003eFiles contain the complete Bumblebee bust ready to print and also sliced model \u003cspan class=\"tlid-translation translation\" lang=\"en\"\u003e\u003cspan class=\"\" title=\"\"\u003e with joints. So model can be movable.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale the busts dimensions are:\u003c\/p\u003e\n\u003cp\u003eWidth approx. 204 mm (8 inches)\u003c\/p\u003e\n\u003cp\u003eLength approx. 183 mm (7.2 inches)\u003c\/p\u003e\n\u003cp\u003eHeight approx. 200 mm (7.9 inches)\u003c\/p\u003e\n\u003cp\u003eYou can scale the model according as you like so it fits your printer.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eWe recommend a layer height of 0.1 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. This model needs supports to print well. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703813816700,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/bumblebee_bust_renders_2-main_render.19_d42ba59b-4772-4567-9b24-6802c913c724.png?v=1756927226"},{"product_id":"t60-pre-order-fallout-4-3d-print-model","title":"T60 helmet from Fallout 4","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDigital 3D printable model of T 60 Helmet from Fallout 4\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis model is \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ea wearable helmet. The helmet is quite big and is meant to be post-processed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFiles contain \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003epieces of the helmet ready to be 3D printed and complete helmet files, that are not cut into smaller pieces.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/ip4KclpdZ3Q\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAt 100% scale the \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ehelmet\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e dimensions are:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWidth approx. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e376 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eLength approx. 382\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eHeight approx. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e310 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model according \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eto your head measurements. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAs the \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003ehelmet\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e is quite big, it is meant to be post-processed. We recommend a layer height \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eof 0.1\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e to \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e0.3\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eFor reliable printing, we also recommend setting a brim to the helmets shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e. Printing settings will vary greatly depending on your specific printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703813849468,"sku":null,"price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/render_scene_new_2019-details-main_render.818-1_42ce4090-ea9e-4a6e-bcf6-1c5ca01dc0f3.png?v=1756927231"},{"product_id":"ice-valyrian-sword-ned-stark","title":"Ned Stark sword Ice","description":"\u003cp\u003eIce was a Valyrian steel great sword and an heirloom of House Stark. It was used both in war and on ceremonial occasions by the Lord of Winterfell. From Game of Thrones fan-made\u003cbr\u003e\nModel contains the sword in one piece and also smaller pieces as you can see on the picture. The\u003cbr\u003e\nlight blue cylinder is supposed to be a steel rod of some sort that we recommend you put there for\u003cbr\u003e\nstrength.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/zpsJXUP77dc\u003c\/p\u003e\n\u003cp\u003eFor more info about this sword check this link:\u003cbr\u003e\nhttps:\/\/gameofthrones.fandom.com\/wiki\/Ice\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eThis sword is massive.\u003cbr\u003e\nAt 100% scale the swords outer dimensions are:\u003cbr\u003e\nLength approx. 1460 mm (57.5 inches)\u003cbr\u003e\nWidth approx. 417 mm (16.5 inches)\u003c\/p\u003e\n\u003cp\u003eModel is pretty big but you can print it a tiny sword if you like :)\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eAs the sword is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the thinner parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703815192956,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/render_scene.555_a9956172-9851-4015-bcaf-55f8c3a7bfc0.jpg?v=1756927412"},{"product_id":"needle-arya-stark-sword","title":"Needle - Arya Stark's Sword","description":"\u003cp\u003eNeedle is a thin sword wielded by Arya Stark. It was given to her by John Snow, who had it made by Mikken, the blacksmith of Winterfell.\u003cbr\u003e\nFor more info about this sword check this link:\u003cbr\u003e\nhttps:\/\/gameofthrones.fandom.com\/wiki\/Needle\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the sword outer dimensions are:\u003cbr\u003e\nLength approx. 767 mm (30.2 inches)\u003cbr\u003e\nWidth approx. 99 mm (3.9 inches)\u003c\/p\u003e\n\u003cp\u003eModel is pretty big but you can print it a tiny sword if you like :)\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eAs the sword is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the thinner parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703815258492,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/render_scene.561-2_0eae9ada-2ff8-4b37-9598-96f0a53ca05d.jpg?v=1756927416"},{"product_id":"fortnite-omega-helmet","title":"Fortnite - Omega helmet","description":"\u003cp\u003eThis is the Fortnite helmet. Helmet belongs to Omega skins.\u003c\/p\u003e\n\u003cp\u003eThis model is a wearable helmet. The helmet is quite big and is meant to be post-processed.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the helmet ready to be 3D printed and complete helmet files, that are not cut into smaller pieces.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale the helmets inside dimensions are:\u003cbr\u003e\nWidth approx. 236 mm (9.3 inches)\u003cbr\u003e\nLength approx. 335 mm (13.18 inches)\u003cbr\u003e\nHeight approx. 360 mm (14.17 inches)\u003cbr\u003e\nYou can scale the model according to your head measurements. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eAs the helmet is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the helmets shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703815356796,"sku":null,"price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/render_helmet_color.923-1_1dce7271-ba3e-4b6e-a4a4-bf81bcf97f97.jpg?v=1756927433"},{"product_id":"widows-wail-sword-game-of-thrones","title":"Widow’s Wail sword","description":"\u003cp\u003eWidow’s Wail sword - 3D PRINT MODEL\u003c\/p\u003e\n\u003cp\u003eThis sword is from Game of Thrones. The hilt of Widow's Wail, featuring the stag of House Baratheon - decorated with Lannister gold.\u003c\/p\u003e\n\u003cp\u003eThe sword is quite big and is meant to be post-processed.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the sword ready to be 3D printed and complete sword files, that are not cut into smaller pieces.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=2Q6bswQbbfQ\u003c\/p\u003e\n\u003cp\u003eFor more info about this sword check this link:\u003cbr\u003e\n\u003ca href=\"https:\/\/gameofthrones.fandom.com\/wiki\/Widow%27s_Wail\"\u003ehttps:\/\/gameofthrones.fandom.com\/wiki\/Widow%27s_Wail\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the sword dimensions are:\u003cbr\u003e\nWidth approx. 266 mm (10.47 inches)\u003cbr\u003e\nLength approx. 53 mm (2 inches)\u003cbr\u003e\nHeight approx. 1450 mm (57 inches)\u003c\/p\u003e\n\u003cp\u003eModel is pretty big but you can print it a tiny sword if you like :)\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eAs the sword is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the thinner parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703815520636,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Widow_Wail_sword_color_1_3Demon_8015b992-d1f4-4186-9370-1b00b6440da3.jpg?v=1756927448"},{"product_id":"ashe-rifle-overwatch-in-game-version","title":"Ashe Rifle Overwatch - In-game version","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.instructables.com\/3D-Printed-Ashes-Rifle-Overwatch-Cosplay-Tutorial\/\"\u003e\u003cimg class=\"alignnone wp-image-66653\" src=\"https:\/\/aws.3d-mon.com\/wp-content\/uploads\/2019\/02\/instructables-banner-1024x768.jpg\" alt=\"\" width=\"653\" height=\"490\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eAshe Rifle in-game version - 3D PRINT MODEL\u003c\/p\u003e\n\u003cp\u003eAshe’s rifle from overwatch. The in-game version. We also have a more detailed version from the cinematic. You can have a look at it on our page.\u003c\/p\u003e\n\u003cp\u003eAshe quickly fires her rifle from the hip or uses her weapon’s aim-down sights to line up a high damage shot. This model is fully sized rifle, that does not shoot. Files contain pieces of the rifle ready to be 3D printed and put together and a complete rifle in obj and stl.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the rifles dimensions are:\u003cbr\u003e\nWidth approx. 45 mm (1.77 inches)\u003cbr\u003e\nLength approx. 1200 mm (47.2 inches)\u003cbr\u003e\nHeight approx. 205 mm (8 inches)\u003cbr\u003e\nYou can scale the model according to your measurements.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eAs the rifle is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703815651708,"sku":null,"price":15.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/20210615_225619_350-3-1_a743242b-14d2-4e13-ba43-01b7423fac10.jpg?v=1756927464"},{"product_id":"fortnite-banana-peely-figure-3dprint","title":"Peely - Fortnite Banana Figure","description":"\u003cp\u003ePeely figure from Fortnite in three poses\u003c\/p\u003e\n\u003cp\u003ePeely is one of the coolest skins from the popular game Fortnite.\u003c\/p\u003e\n\u003cp\u003eThis model is a figure. A banana on skinny legs doesn’t make a very stable character but he stands :)\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eYou can scale the model as you like\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe recommend a layer height of 0.1 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. For reliable printing, we also recommend setting a brim. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703815848316,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/IMG_20190316_155210_a6ff9f12-5fea-48e1-be71-78eb92e14873.jpg?v=1756927492"},{"product_id":"maiden-sword-goblin-slayer","title":"Maiden sword - Goblin Slayer","description":"\u003cp\u003eMaiden sword - Goblin Slayer - 3D PRINT MODEL\u003c\/p\u003e\n\u003cp\u003eSword Maiden, formerly known as High Priestess, is a former gold-ranked adventurer who currently serves as the Temple of Law's Archbishop of the Supreme God.\u003c\/p\u003e\n\u003cp\u003eFor more info about this sword check this link: \u003ca href=\"https:\/\/goblin-slayer.fandom.com\/wiki\/Sword_Maiden\"\u003ehttps:\/\/goblin-slayer.fandom.com\/wiki\/Sword_Maiden\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe sword is quite big and is meant to be post-processed.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the sword ready to be 3D printed and complete sword files, that are not cut into smaller pieces.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the sword dimensions are:\u003cbr\u003e\nWidth approx. 326 mm (12.8 inches)\u003cbr\u003e\nLength approx. 52 mm (2 inches)\u003cbr\u003e\nHeight approx. 1392 mm (54.8 inches)\u003c\/p\u003e\n\u003cp\u003eModel is pretty big but you can print it a tiny sword if you like :)\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eAs the sword is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the thinner parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703815979388,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Maiden_sword_color_2_3Demon_bb29dfc9-ff36-4729-94d1-de7145f8a8a9.jpg?v=1756927505"},{"product_id":"high-elf-archers-bow-dagger-goblin-slayer","title":"High elf Archer´s bow + dagger Goblin Slayer","description":"\u003cp\u003eHigh elf Archer´s bow and dagger Goblin Slayer - 3D PRINT MODEL\u003c\/p\u003e\n\u003cp\u003eHigh Elf Archer is an adventurer, who is a member of Goblin Slaye´s party.\u003c\/p\u003e\n\u003cp\u003eThe dagger model also includes a dagger cover.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the bow ready to be 3D printed and complete bow files, that are not cut into smaller pieces.\u003c\/p\u003e\n\u003cp\u003eFor more info about this character check this link: \u003ca href=\"https:\/\/goblin-slayer.fandom.com\/wiki\/High_Elf_Archer\"\u003ehttps:\/\/goblin-slayer.fandom.com\/wiki\/High_Elf_Archer\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the bow's dimensions are:\u003cbr\u003e\nWidth approx. 80 mm (3.14 inches)\u003cbr\u003e\nLength approx. 250 mm (9.84 inches)\u003cbr\u003e\nHeight approx. 1500 mm (59 inches)\u003c\/p\u003e\n\u003cp\u003eThe model is in real size, but you can scale it as you like.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the dagger’s dimensions are:\u003cbr\u003e\nWidth approx. 65 mm (2.55 inches)\u003cbr\u003e\nLength approx. 23 mm (0.9 inches)\u003cbr\u003e\nHeight approx. 227 mm (10.9 inches)\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eAs the bow is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the thinner parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703816044924,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/High_elf_Archer_cover_3Demon_65376459-858e-458a-9f90-677c99f0b51e.jpg?v=1756927510"},{"product_id":"priestess-staff-goblin-slayer","title":"Priestess staff - Goblin Slayer","description":"\u003cp\u003eThis is a \u003cstrong\u003edigital 3D printable model\u003c\/strong\u003e of the Priestess' staff from Goblin Slayer.\u003c\/p\u003e\u003ch2\u003e📦 Included Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  STL (cut for 200mm printer beds) \u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Assembled OBJ file (for easy scaling)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  All cut parts are placed on the print bed just as we would print them, saving you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  Width: 180 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Length: 45 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Height: 1600 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  Feel free to scale the model to fit your needs. Learn more about sizing and scaling for cosplay \u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e  Layer height: 0.15 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Infill: 10% gyroid pattern\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  Supports: 30° organic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e  For taller parts, use a brim for better bed adhesion\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  Settings may vary depending on your printer, so treat these as a starting point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out the \u003c\/strong\u003e\u003ca href=\"https:\/\/3d-mon.com\/products\/goblin-slayer-whole-costumes?_pos=2\u0026amp;_sid=399d4d2e3\u0026amp;_ss=r\" class=\"editor-link\" rel=\"ugc\" target=\"_blank\"\u003e\u003cstrong\u003eGoblin Slayer Bundle\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e🛠️ Assembly Instructions\u003c\/h2\u003e\u003cp\u003eGlue the parts together. Hex-pegs for easy alignment are included. For stronger joints, melt the seams with a soldering tool.\u003c\/p\u003e\n\u003cp\u003e  No 3D printer? No problem! Search for your local 3D printing services.\u003cbr\u003e\u003cbr\u003eThis fan-made model was brought to life by \u003cstrong\u003e3Demon\u003c\/strong\u003e, a team of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been creating 3D printable models for over a decade, from cosplay accessories to all sorts of interesting designs.\u003c\/p\u003e\n\u003cp\u003e  ✨ Check out more of our creations or join our community \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703816241532,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Priestess_staff_color_2_3Demon_f7229284-b644-4c9c-bac0-a51abe6aa113.jpg?v=1768913190"},{"product_id":"game-of-thrones-stl-got-dragon-lamp-3d-print","title":"Game of Thrones Dragon - 3D print Figure and Lamp","description":"\u003cp\u003e\u003cstrong\u003eDragon with Flames - Lamp or Figure - GAME OF THRONES 3D PRINT MODEL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInstructions on assembling can be found \u003ca href=\"https:\/\/www.instructables.com\/id\/3D-Printed-Dragon-Lamp\/\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThis product is a digital 3D model ready to be 3D printed not a physical product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/g3HH10yAMmc\u003c\/p\u003e\n\u003cp\u003eThis is a model of Game of Thrones Dragons with different kinds of options.\u003cbr\u003e\n-with or without the Night King riding on its back\u003cbr\u003e\n-2 different kinds of flames (one straight flamethrower and one in between that is on most pictures and can easily stand on a flat surface)\u003cbr\u003e\n-with or without the option of having it prepared for the insertion of an LED for lighting (pre-cut holes and easy assembly)\u003cbr\u003e\n-a high polygon version for detailed printing\u003cbr\u003e\n-a pre-cut versions of the dragon so it needs less supports and so you can print it bigger with you given surface are (wings separate and body in three parts)\u003c\/p\u003e\n\u003cp\u003eFiles contain different versions of the Go T dragons and flames. The dragons also included cut into smaller parts in stl format.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/6eQwWavuw24\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eThe main scale of the dragons is 250 mm (which fits diagonally on a Prusa sized printer) wide.\u003cbr\u003e\nYou can scale the model to any size you like. It is in high detail so you can enlarge if you like.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eWe printed the dragon with Fillamentum's PLA. We recommend a layer height of 0.05 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Some parts of the dragon definitely need supports. For reliable printing, we also recommend setting a brim to some of the parts. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer. For printing the straight flame without supports in the top part to print for a lamp I recommend splitting the print into two processes where you would use supports in the bottom part to be able to print the vertical surface and then leave the straight part without supports so it looks nicer and carries light better.\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003cbr\u003e\nhttps:\/\/3d-mon.com\/links\/\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703816274300,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/IMG_20190329_133539_b7b7aa0a-450e-4891-a15d-1bf5f5b043b7.jpg?v=1764231748"},{"product_id":"euron-greyjoys-axe-game-of-thrones","title":"Euron Greyjoy's Axe","description":"\u003cp\u003eThis is a \u003cb\u003edigital 3D printable\u003c\/b\u003e model of \u003cspan\u003e\u003cspan style=\"color: #303030;\"\u003e\u003cspan style=\"font-family: Inter, apple-system, BlinkMacSystemFont, San Francisco, Segoe UI, Roboto, Helvetica Neue, sans-serif;\"\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cb\u003eEuron Greyjoy's Axe\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e from Game of Thrones.\u003c\/p\u003e\u003ch2\u003e📦 Included Files\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp align=\"left\"\u003e  STL (cut for 200mm printer beds)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp align=\"left\"\u003e  Assembled OBJ file (for easy scaling)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp align=\"left\"\u003e  All cut parts are placed on the print bed just as we would print them, saving you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp align=\"left\"\u003e  Width: 32 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp align=\"left\"\u003e  Length: 264 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp align=\"left\"\u003e  Height: 920 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp align=\"left\"\u003e  Feel free to scale the model to fit your needs. Learn more about sizing and scaling for cosplay \u003ca href=\"https:\/\/3d-mon.com\/sizing-a-3d-printable-model-for-cosplay\/\"\u003e\u003cspan style=\"color: #1155cc;\"\u003e\u003cu\u003ehere\u003c\/u\u003e\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp align=\"left\"\u003e  Layer height: 0.15 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp align=\"left\"\u003e  Infill: 10% gyroid pattern\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp align=\"left\"\u003e  Supports: 30° organic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp align=\"left\"\u003e  For taller parts, use a brim for better bed adhesion\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp align=\"left\"\u003e  Settings may vary depending on your printer, so treat these as a starting point.\u003c\/p\u003e\n\u003ch2\u003e🛠️ Assembly Instructions\u003c\/h2\u003e\u003cp\u003eGlue the parts together. Hex-pegs for easy alignment are included. For stronger joints, melt the seams with a soldering tool.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e  No 3D printer? No problem! Search for your local 3D printing services.\u003cbr\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003eThis fan-made model was brought to life by \u003cb\u003e3Demon\u003c\/b\u003e, a team of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been creating 3D printable models for over a decade, from cosplay accessories to all sorts of interesting designs.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e  Check out more of our creations or join our community \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere\u003c\/a\u003e. \u003c\/p\u003e","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703816307068,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Euron_Greyo_Axe_color_1_3Demon-1_f52f8028-3537-4a7d-af84-1a97a9b87b73.jpg?v=1756927529"},{"product_id":"pat-a-mat-figurky-3d-tisk-stl-print","title":"Pat \u0026 Mat Figures","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePat a Mat Figures\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese two models are figures based on animated short films made in the Czech Republic.\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eFigurky Českých Kutilů Pata a Mata\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\nFiles contain \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eeach of the figures in one piece.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003e \u003cspan style=\"font-weight: 400;\"\u003eYou can scale the model as you like\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe recommend a layer height \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eof 0.1\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e to \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e0.2\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e mm on FDM printers. You can paint the print like you see on the pictures if you want to. This is not a multicolor print. All parts are aligned to the printing platform for easy manipulation. \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eFor reliable printing, we also recommend setting a brim to the figures, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e. Printing settings will vary greatly depending on your specific printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703816405372,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/patmat-foto-main-1_0ad267a2-dff1-469a-94fb-8d0c081aae72.png?v=1756927541"},{"product_id":"dark-mountain-helmet-game-of-thrones","title":"Dark Mountain Helmet - Game of Thrones","description":"\u003cp\u003eHelmet of Ser Gregor Clegane from Game of Thrones after he is brought back to life by Qyburn. He is known for his size and head crushing strength.\u003c\/p\u003e\n\u003cp\u003eThis model is a wearable helmet. The helmet is quite big and is meant to be post-processed.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the helmet ready to be 3D printed and complete helmet files, that are not cut into smaller pieces.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/O86ScB1hVJk\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the helmets inside dimension are:\u003cbr\u003e\nWidth approx. mm\u003cbr\u003e\nLength approx. mm\u003cbr\u003e\nYou can scale the model according to your head measurements. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eAs the helmet is quite big it is meant to be post-processed, we recommend a layer height of 0.1 to 0.2 mm on FDM printers, you can print the black part even at a lower quality like 0.3 mm to save print time as that does not have small details on it. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the helmets shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703816438140,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/20191018_120817_60cf4040-5d7e-4201-a65f-54eab6e16d85.gif?v=1756927547"},{"product_id":"shell-mermaid-melody","title":"Shell Mermaid Melody","description":"\u003cp\u003eShell from Mermaid Melody\u003c\/p\u003e\n\u003cp\u003eMermaid Melody is a \u003cem\u003eshōjo\u003c\/em\u003e manga and anime series created by Michiko Yokote , with artwork by Pink Hanamori .\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis model is a shell from Mermaid Melody .\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the shell ready to be 3D printed and complete shell files, that are not cut into smaller pieces\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale the shell dimension are:\u003c\/p\u003e\n\u003cp\u003eWidth approx. 85 mm (3.3 inches)\u003c\/p\u003e\n\u003cp\u003eLength approx. 62 mm (2.4 inches)\u003c\/p\u003e\n\u003cp\u003eHeight approx. 216 mm (8.5 inches)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eWe recommend a layer height of 0.1 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703816962428,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/mermaid-shell-main_3bf8d3ea-ae03-4657-aa7d-1a23ce241f87.jpg?v=1756927565"},{"product_id":"officer-d-va-gun-and-whistle-from-overwatch","title":"Officer D.Va gun and whistle from Overwatch","description":"\u003cp\u003eThis is a \u003cb\u003edigital\u003c\/b\u003e 3D printable model of \u003cstrong\u003eOfficer D. Va\u003c\/strong\u003e blaster pistol from \u003cstrong\u003eOverwatch.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe download contains models ready to be 3D printed on a 200 mm print bed.\u003cbr\u003e\nThis model is a cosplay prop weapon, consists of parts wchich need to be assembled using superglue.\u003cbr\u003e\nFiles contain pieces of the weapon ready to be 3D printed and complete uncut files (OBJ.)\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the weapon dimensions are:\u003cbr\u003e\nWidth approx.: (22,38 mm)\u003cbr\u003e\nLength approx.: (3,72 mm)\u003cbr\u003e\nHeight approx.: (19,97 mm)\u003cbr\u003e\nYou can scale the model as you like.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eThe weapon is small, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the weapons shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific print.\u003c\/p\u003e\n\u003cp\u003eWe use a 10 mm brim for tall parts with a small base for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003eWe make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations \u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003ehere.\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703817388412,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/render_scene_new_2019-sedivy-gradient-main_render_2.459_75c214b2-93ae-466a-b99a-311a7a479425.png?v=1756927577"},{"product_id":"euron-greyjoy-ring","title":"Euron Greyjoy - Ring","description":"\u003cp\u003eEURON GREYJOY RING- GAME OF THRONES 3D PRINT MODEL\u003c\/p\u003e\n\u003cp\u003eFiles contain complete ring files ready to be 3D printed.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale the ring dimensions are:\u003cbr\u003e\nWidth approx. 35 mm\u003cbr\u003e\nLength approx. 40 mm\u003cbr\u003e\nHeight approx. 12 mm\u003c\/p\u003e\n\u003cp\u003eThe inside diameter of the ring is 24 mm at 100% scale.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eAs the ring is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com\/preorder\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703817421180,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/ring-greyjoy-detail1.159_619d50c3-9439-4c27-ba8a-46ccc6823c2f.png?v=1756927581"},{"product_id":"ragnarok-fortnite-helmet","title":"Ragnarok Fortnite helmet","description":"\u003cp\u003eRagnarok Fortnite helmet - 3D PRINT MODEL\u003c\/p\u003e\n\u003cp\u003eThis is the Fortnite Ragnarok helmet. In the game, the helmet appeared first in the season 5.\u003c\/p\u003e\n\u003cp\u003eThis model is a wearable helmet and it is quite big and is meant to be post-processed.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the helmet ready to be 3D printed and complete helmet files, that are not cut into smaller pieces.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale the helmet’s outside dimensions are:\u003cbr\u003e\nWidth approx. 355 mm\u003cbr\u003e\nLength approx. 460 mm\u003cbr\u003e\nHeight approx. 303 mm\u003c\/p\u003e\n\u003cp\u003eInner dimensions are:\u003cbr\u003e\nWidth approx. 200 mm\u003cbr\u003e\nLength approx. 240 mm\u003c\/p\u003e\n\u003cp\u003eYou can scale the model according to your head measurements. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eAs the helmet is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the helmets shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703817879932,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Ragnarock-color-edit-main_4df0d638-74cb-4ee1-9cda-1abded6de5ea.jpg?v=1756927628"},{"product_id":"gendrys-hammer-game-of-thrones-print","title":"Gendry's Hammer - Game of Thrones","description":"\u003cp\u003eGendry's Hammer - GAME OF THRONES 3D PRINT MODEL\u003c\/p\u003e\n\u003cp\u003eThe hammer of Robert Baratheon's bastard son Gendry. A skilled blacksmith.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the hammer ready to be 3D printed and complete files, that you can cut up yourself.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale the hammers dimensions are:\u003cbr\u003e\nWidth approx. 335 mm\u003cbr\u003e\nLength approx. 1042 mm\u003c\/p\u003e\n\u003cp\u003eYou can scale the model according to fit you well, but the original size should correspond to the series.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eAs the model is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703817945468,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/hammer-GOT-color-main_f4ab554f-0cb3-47c1-a7c1-969eb1392d82.jpg?v=1756927631"},{"product_id":"kindred-bow-3d-print-stl","title":"Kindred’s Bow - League of Legends","description":"\u003cp\u003eThis is a digital 3D printable model of \u003cstrong\u003eKindred’s Bow\u003c\/strong\u003e from \u003cstrong\u003eLeague of Legends.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\u003cp\u003eAt 100% scale, the model’s dimensions are approximately:\u003cbr\u003e\nWidth 60 mm\u003cbr\u003e\nLength 1215 mm\u003cbr\u003e\nHeight 377 mm\u003cbr\u003e\nYou can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\u003cp\u003eWe use these settings for most of our prints:\u003cbr\u003e\nLayer height 0.15 mm\u003cbr\u003e\nInfill 15%\u003cbr\u003e\nSupports 45°\u003cbr\u003e\nFor parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.\u003c\/p\u003e\n\u003cp\u003ePrinting settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=nRMDsVcs6Ks\u003c\/p\u003e\n\u003cp\u003eWe try to make the models in a way that uses as little support material as possible.\u003cbr\u003e\nThis model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.\u003c\/p\u003e\n\u003cp\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/p\u003e\n\u003cp\u003eThis fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703818076540,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/Kindred_Bow_color_2_3Demon-1_cf4256ef-bf2d-423a-8f85-1dd4f6f6b490.jpg?v=1756927647"},{"product_id":"conan-the-barbarian-sword-father","title":"Father’s Sword - Conan the Barbarian","description":"\u003cp\u003eThis model is a full size replica of Father’s Sword. The sword is quite big and is meant to be post-processed.\u003c\/p\u003e\n\u003cp\u003eConan the Barbarian is an epic tale of a child sold into slavery who grows into a man seeking revenge against the warlord who massacred his tribe. With this sword Conan’s father taught the boy everything he would need to know about handling a sword. The cross-guard represents the skull of a moose, and the pommel the joined hoofs of the animal. The blade, engraved with the original runes, is dedicated to Crom, the God of steel.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the sword ready to be 3D printed and complete sword files that are not cut into smaller pieces.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale the swords dimensions are:\u003c\/p\u003e\n\u003cp\u003eWidth approx. 230 mm\u003c\/p\u003e\n\u003cp\u003eLength approx. 1199 mm\u003c\/p\u003e\n\u003cp\u003eBlade Length approx. 923 mm\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eAs the sword is quite big, it is meant to be post-processed. We recommend a layer height of 0.2 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the swords shell parts, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eIf you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com\/preorder\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis \u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003efan-made\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703818109308,"sku":null,"price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/conan-father-sword-color-main_4724cddb-b7ad-49ca-98b1-f709a1734080.jpg?v=1756927652"},{"product_id":"klingon-mekleth-star-trek","title":"Klingon Mek'leth - Star Trek","description":"\u003cp\u003eKlingon Mek'leth - Star Trek 3D PRINT MODEL\u003c\/p\u003e\n\u003cp\u003eA mek'leth was a traditional Klingon bladed weapon. While Klingons often carried disruptors, they prefered to use bladed weapons in combat, with the two most common ones being the mek'leth and the bat'leth.\u003c\/p\u003e\n\u003cp\u003eFiles contain pieces of the weapon ready to be 3D printed and complete weapon files that are not cut into smaller pieces.\u003c\/p\u003e\n\u003ch2\u003e📏 3D Model Dimensions\u003c\/h2\u003e\n\u003cp\u003eAt 100% scale the weapon’s dimensions are:\u003cbr\u003e\nWidth approx. 13 mm\u003cbr\u003e\nLength approx. 200 mm\u003cbr\u003e\nHeight approx. 67 mm\u003cbr\u003e\nYou can scale the model as you like.\u003c\/p\u003e\n\u003ch2\u003e🖨️ 3D Printing Settings\u003c\/h2\u003e\n\u003cp\u003eWe recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the weapons shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.\u003c\/p\u003e\n\u003cp\u003eIf you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com\/preorder\u003c\/p\u003e\n\u003cp\u003eThis model was created by Jose from our 3 Demon team. It is fan-made.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eDo you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eWe are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003e\u003cbr\u003e\n\u003c\/span\u003e \u003cspan style=\"font-weight: 400\"\u003eHere are some links to our social media where you can join our community or just look at more of our creations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/3d-mon.com\/links\/\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSocial Media Links\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n","brand":"3Demon","offers":[{"title":"Default Title","offer_id":55703818240380,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/files\/mekleth1_color_render.main_cf53f89f-8ec8-4a22-9da9-24dadcc27741.jpg?v=1756927660"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/1025\/2668\/collections\/collection_all.png?v=1778245428","url":"https:\/\/3d-mon.com\/collections\/all\/shields.oembed","provider":"3Demon","version":"1.0","type":"link"}