Included are divided .stl parts as is shown on infographic picture + complete wand .stl and .obj file.
“Professor Albus Percival Wulfric Brian Dumbledore was the Transfiguration Professor, and later Headmaster of Hogwarts School of Witchcraft and Wizardry. ”
For more info about this character check this link:
All the wands are scaled to 300 mm. If you want the wands in their original size, scale them accordingly.
Sirius Black 15 inches / 381 mm
Ron Weasley 2nd 14 inches / 335 mm
Ron Weasley 1st 12 inches / 305 mm
Albus Dumbledore (Elder Wand) 15 inches / 381 mm
Hermione Granger 10¾ inches / 273 mm
Harry Potter 11 inches (both versions) / 279 mm
Severus Snape 13 inches / 330 mm
Voldemort 13½ inches / 343 mm
As the wand is meant to be post-processed , we recommend a height of layer from 0.2 to 0.3 mm on FDM printers. All parts are aligned to printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. It will ensure, that the part won’t come off the printing platform during the printing process.
All parts are described on infographic pictures.