This is a digital 3D printable model of a custom holder/stand that is suited for our collection of Star Wars Blasters. We closely studied the aesthetics of individual objects from Star Wars and created this simple but efficient model based on those characteristics so it may fit well into the universe.
It comes in three different heights to fit different sized blasters. For example, you can use a shorter one for the stock of a rifle and a longer one for the barrel.
The model is made from 5 different parts that are designed to be joined together with screws to achieve high flexibility in any environment. The model can be either used as a table stand or attached to a wall. The assembly is described with pictures that are part of the download file.
For the assembly of one model, you will need: three M4x16 (8×5/8inch.) screws, four M4 nuts, some glue and we also recommend using one M4x20 (8×3/4inch.) screw for the base.
The download contains pieces of the model ready to be 3D printed on a 200 mm print bed and assembled parts in one file. All parts are placed on the print bed as we would print them to save you time.
At 100% scale the model’s dimensions are approximately:
Width 51 mm
Length 84 mm
Height 110 / 140 / 170 mm
You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well and that assembly will be possible.
3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.15 mm
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.
We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.
Printing settings will vary greatly depending on your specific printer.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links/