Star Wars 100+ Blasters Collection
Number of Backers
All stretch goals achieved!
- The collection includes 100+ Blasters from the Star Wars universe
- The more blasters you get the bigger the discount
- Up to 82% off
- The set is going to be more expensive once more blasters are added
but if you buy the whole set now, you will get the new ones at no extra cost - These are digital files ready for 3D printing
- You can buy the whole set or just some blasters
- 1 costs from $10 to $25 but you can get the whole set of 100+ blasters for a discount
Discount: 20% – 85% when you buy more than 2 blasters
When you buy the whole collection the cost is $2.4 per blaster
All blasters are ready to download now!
This collection includes 100+ digital 3D printable models of blasters from Star Wars
The download contains pieces of the blasters ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.
The STL files are named the same way as the parts in blueprint pictures which are included in the downloadable ZIP. They could help you with assembling the blaster together. If you want to physically print the blueprints and don’t want to waste much ink, you can download this black and white version: https://3d-mon.com/wp-content/uploads/2021/06/218324343.zip
We also provide free holder/stand for your blasters, check it out here!: https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/star-wars-blaster-holder/
For every 20 people that buy at least one blaster, we will add 10 new ones to this collection. Everyone who buys the collection now will get access to the newer ones.
SIZE
At 100% scale, the blasters are approx. the same size as in the Star Wars movies.
You can scale the models as you wish.
3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.2 mm
Infill 15%
Supports 45°
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.
We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be glueing, sanding, painting, etc.
Printing settings will vary greatly depending on your specific printer.
These models are non-functional replicas of blasters. They are not meant as weapons but as cosplay accessories.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.
Here are some links to our social media where you can join our community or just look at more of our creations: