THE SITH ACOLYTE MASK- STAR WARS 3D PRINT MODEL
Sith acolyte mask from Star Wars. It is known for its look and structure.
This model is a wearable helmet. The helmet is quite big and is meant to be post-processed.
Files contain pieces of the mask ready to be 3D printed and complete mask files, that are not cut into smaller pieces.
At 100% scale the masks inside dimension are:
Width approx. 197 mm
Height approx. 228 mm
You can scale the model according to your head measurements. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit.
We recommend joining the front and back part of the helmet by fabric rubber bands that are glued to the inside by using epoxy. That should allow you to stretch it when you put it on, and hold it when you wear it.
As the mask is quite big, it is meant to be post-processed. We recommend a layer height of 0.2 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the helmets shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.
This model was created by a member of our 3Demon team. It is fan-made. We are group of modelling and 3d printing enthusiasts, who work in a 3D makerspace located in Prague, Czech Republic. We make cosplay accessories, technical gadgets and much more. Have a look at our Facebook page or visit our website to find out more about us: