Dragon Staff

Description

This is a magical staff with a dragon at the top

The Lyrium-Infused Staff Schematic is a tier 4 staff schematic in The Descent DLC for Dragon Age: Inquisition

This model is a staff. The staff is quite big and is meant to be post-processed.

Files contain pieces of the staff ready to be 3D printed and complete staff files, that are not cut into smaller pieces.

SCALE
At 100% scale the staff’s dimensions are:
Width approx. 180 mm
Length approx. 1860 mm
Height approx. 90 mm

Model is pretty big but you can scale it.

PRINTER SETTINGS

We recommend using a wooden rod instead of printing the middle part. The holes on the top and bottom are 32 mm in diameter at 100% scale.
As the staff is quite big, it is meant to be post-processed. We recommened a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printning, we also recommend setting a brim to the staff shell parts, because of their heights and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.