Shopping cart

Kena: Bridge of Spirits – Staff Bow and Accessories

In stock
  • High detailed model of Kena’s staff, bow, amulet and buckle from Kena: Bridge of Spirits
  • 3D Model fully ready for simple 3D printing on  FDM ,SLS and SLA printer.
  • Files contain
    • Staff, bow, amulet and buckle separated to smaller printable parts (STLs)
    • Whole Staff and Bow (OBJ)
    • Accessories

Kena - Staff
Kena - Bow
Kena - Amulet
Kena - Buckle

This is a digital 3D printable model of Kena’s Staff, Bow and Accessories from the game Kena: Bridge of Spirits.

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.

At 100% scale the Staff’s dimensions are approximately:
Width 176 mm
Length 1680 mm
Height 165 mm

At 100% scale the Bow’s dimensions are approximately:
Width 582 mm
Length 176 mm
Height 1537 mm

At 100% scale the Amulet with chain/without chain dimensions are approximately:
Width 186/136 mm
Length 202/126 mm
Height 174/78 mm

At 100% scale the Buckle’s dimensions are approximately:
Width 81 mm
Length 30 mm
Height 63 mm

You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.

We use these settings for most of our prints:
Layer height 0.2 mm
Infill 15%
Supports 45°
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.

We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.

Printing settings will vary greatly depending on your specific printer.

Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: