Fennec Shand helmet
This 3D printable model is a full size wearable helmet.
Files contain pieces of the helmet (STL) ready to be 3D printed on 200 x 200 x 200 mm 3D printers and 3D model files that are not cut into smaller pieces (OBJ)
The model is meant to be post-processed after printing. This can be sanding, glueing, painting,…
At 100% scale the helmet total dimensions are approx.:
Width: 221 mm
Length: 298 mm
Height: 270 mm
You can scale the model according to your head measurements. It is good to make it a little bigger and then add cushioning to the inside for a snug and comfortable fit.
As the helmet is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the helmets shell parts, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.
If you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com/preorder
This model was created by someone from our 3Demon team. It is fan-made. We are group of modelling and 3d printing enthusiasts, who work in a 3D makerspace located in Prague, Czech Republic. We make cosplay accessories, technical gadgets and much more. Have a look at our Facebook page or visit our website to find out more about us: