Shopping cart
Critical Role Staff

Fearne Calloway staff – Critical Role

In stock
  • Detailed digital model of Fearne Calloway’s staff – Staff of the adder from the Critical Role play series.
  • 3D Model fully ready for simple 3D printing on FDM, SLS, and SLA printers.
  • Files contain
    • Staff separated into smaller printable parts (STL)
    • Whole & Cut Staff (OBJ)


3D printable staff


This is a digital 3D printable model of Fearne Calloway’s staff – Staff of the adder from the Critical Role play series.

We created the 3D model based on the officilal illustraion of Fearne Calloway in Campaign 3, by Hannah Friederichs. The prop features hex-shaped slots that will help you with the assembly using our hex-pins. The lantern is hollow and therefore allows inserting an LED light.

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are oriented and placed on the print bed as we would print them to save you time.

At 100% scale the model’s dimensions are approximately:
Width 268 mm
Length 140 mm
Height 1905 mm
You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.

We use these settings for most of our prints:
Layer height 0.2 mm
Infill 15%
Supports 45°
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.

We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.

Printing settings will vary greatly depending on your specific printer.

Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This STL was used by @ruby_silverado for her Fearne cosplay, printed by @remarkableprops.
Check our Instructables to learn more about the project!

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:

Got something to discuss?


You may also like…